diff options
51 files changed, 17 insertions, 4692 deletions
diff --git a/.gitattributes b/.gitattributes new file mode 100644 index 0000000..d7b82bc --- /dev/null +++ b/.gitattributes @@ -0,0 +1,4 @@ +*.txt text eol=lf +*.htm text eol=lf +*.html text eol=lf +*.md text eol=lf diff --git a/LICENSE.txt b/LICENSE.txt new file mode 100644 index 0000000..6312041 --- /dev/null +++ b/LICENSE.txt @@ -0,0 +1,11 @@ +This eBook, including all associated images, markup, improvements, +metadata, and any other content or labor, has been confirmed to be +in the PUBLIC DOMAIN IN THE UNITED STATES. + +Procedures for determining public domain status are described in +the "Copyright How-To" at https://www.gutenberg.org. + +No investigation has been made concerning possible copyrights in +jurisdictions other than the United States. Anyone seeking to utilize +this eBook outside of the United States should confirm copyright +status under the laws that apply to them. diff --git a/README.md b/README.md new file mode 100644 index 0000000..cda1643 --- /dev/null +++ b/README.md @@ -0,0 +1,2 @@ +Project Gutenberg (https://www.gutenberg.org) public repository for +eBook #54340 (https://www.gutenberg.org/ebooks/54340) diff --git a/old/54340-0.txt b/old/54340-0.txt deleted file mode 100644 index 6cfb24c..0000000 --- a/old/54340-0.txt +++ /dev/null @@ -1,1959 +0,0 @@ -The Project Gutenberg EBook of The Art of Architectural Modelling in Paper, by -T. A. Richardson - -This eBook is for the use of anyone anywhere at no cost and with -almost no restrictions whatsoever. You may copy it, give it away or -re-use it under the terms of the Project Gutenberg License included -with this eBook or online at www.gutenberg.org/license - - -Title: The Art of Architectural Modelling in Paper - -Author: T. A. Richardson - -Release Date: March 11, 2017 [EBook #54340] - -Language: English - -Character set encoding: UTF-8 - -*** START OF THIS PROJECT GUTENBERG EBOOK ARCHITECTURAL MODELLING IN PAPER *** - - - - -Produced by Richard Tonsing, deaurider and the Online -Distributed Proofreading Team at http://www.pgdp.net (This -file was produced from images generously made available -by The Internet Archive) - - - - - - -[Illustration: - - FRONTISPIECE. -] - -[Illustration] - - - - - THE ART - - OF - - ARCHITECTURAL MODELLING - - IN PAPER. - - - BY - - T. A. RICHARDSON, - - ARCHITECT. - - - WITH ILLUSTRATIONS DESIGNED BY THE AUTHOR, AND ENGRAVED BY O. JEWITT. - - - LONDON: - JOHN WEALE, 59, HIGH HOLBORN. - 1859. - - - - - LONDON: - BRADBURY AND EVANS, PRINTERS, WHITEFRIARS. - ------------------------------------------------------------------------- - - - - - PREFACE. - - -In offering the following practical dissertation (the first ever yet -published) upon the Art of Architectural Modelling, the Author feels -that he is supplying a want that must have been long felt by many -students and others in the architectural profession. The utility of the -“Model,” coupled with its beauty, is ample recommendation of the study; -and the modeller will be able to furnish the architect with sure and -certain means that he may find weighty difficulties surmounted, -especially in the case of uncomprehending clients, by giving to them the -designs of their edifices with a distinctness almost equal to the real -work when completed. With many clients, even “perspectives” are poorly -understood, which seldom fails to cause some slight dissatisfaction on -their part when they see too late certain things that the eye would have -detected in the model and corrected in the outset. Models are becoming -very general, where buildings are subjects of competition; and as this -course of procedure and honourable encounter bids fair (when weeded of -some of its present objections) to open up a good and honourable system, -whereby the “race _may be_ to the swift,” the importance of the -following brief and simple Treatise on the subject, becomes doubly -clear. - - T. A. R. - - CHESTER, _March, 1859_. - - - - - CONTENTS. - - - PAGE - - PREFACE iii - - INTRODUCTION 13 - - - PART I. - - OF THE MATERIALS REQUIRED. - - PAPER 19 - - ADHESIVE MATERIAL 21 - - OTHER REQUISITES 22 - - - PART II. - - OF THE INSTRUMENTS NECESSARY. - - CUTTING BOARD 24 - - MODELLING PRESS 25 - - =T= SQUARE 29 - - ADJUSTING STRAIGHT EDGE 31 - - CUTTING KNIVES 33 - - ADJUSTING KNIFE COMPASS 36 - - - PART III. - - THE COMMENCEMENT AND FINISH OF A MODEL. - - OUTLINE PLAN 40 - - THICKNESS OF PAPER FOR WALLS 40 - - OUTLINING THE ELEVATION 41 - - WINDOW FRAMES 44 - - GROUND PLAN, OUTLINE PLAN 45 - - GLASS OR OTHER BACKING TO WINDOWS 48 - - DOORS 49, 51 - - FORMING MITRES 52 - - INCIDENTAL PRESSURE DURING PROGRESS 54 - - FIXING THE MODEL TOGETHER 54 - - BLOCKING PIECES TO ANGLES 54 - - PREPARATION FOR FINAL FASTENING TO STAND 56 - - METHOD OF INSERTING THE WOOD STAY 57 - - THE CORNICE 59 - - MOULDING TOOLS 60 - - DETAILS OF WINDOWS 61 - - CIRCULAR PEDIMENTS 64 - - QUOINS 64 - - CIRCULAR ARCHITRAVES 65 - - KEYSTONES 65, 66 - - CANTALIVERS 66 - - CUTTING, CURVES 66 - - PLAIN ARCHITRAVES 67 - - CUTTING IN GENERAL WITH THE KNIFE 68 - - DETAILS OF WINDOWS 69 - - THE GREENHOUSE 73, 75 - - PILASTERS 75 - - CAP AND BASE 75 - - ROOF OF GREENHOUSE 76, 77 - - CORNICE AND PLINTH 79 - - CHIMNEYS 79 - - ROOF OF HOUSE 83, 84, 85 - - REMOVING THE MODEL 88 - - PREPARATION OF FINAL STAND 88 - - PREPARATION OF GLASS SHADE 89 - - FIXING THE MODEL TO ITS STAND 89 - - GOTHIC ARCHITECTURE, AND REFERENCE TO IN GLOSSARY 90 - - - PART IV. - - HINTS ON LANDSCAPE GARDENING. - - INTRODUCTION 91 - - PEDESTALS, SUN DIALS, GATE PIERS, BALUSTERS 93 - - IMITATIONS OF LAWNS, GRASS, ETC. 94 - - WATER, ROCKS, AND GROTTOES 94 - - WALKS, DRIVES, FLOWER BEDS, TREES, AND SHRUBS 95 - - - PART V. - - A GLOSSARY, CONTAINING THE METHOD OF WORKING VARIOUS DETAILS 97 - NOT HITHERTO DESCRIBED - - TO THE READER. FINIS. 111 - ------------------------------------------------------------------------- - - - - - THE ART - - OF - - ARCHITECTURAL MODELLING - - IN PAPER. - - - - - INTRODUCTION. - - -The art of Architectural Modelling is not so difficult to acquire, as an -observer, examining a model and admiring the minuteness of its parts, -would be led to suppose. But in order to gain a certain degree of -proficiency, a large amount of patience and perseverance is absolutely -necessary. The great beauties of a model consist, firstly, in perfect -symmetry and correctness of parts, all the angles being clear, -well-defined, and sharp, the various minutiæ of detail accurately -delineated; and secondly, to the straightness and evenness of the -horizontal and perpendicular lines. It will be, therefore, readily -understood, that it is these portions of the manipulation which demand -the student’s attention, more particularly as the joining of the paper -or cardboard by means of a mitre, as well as the cutting of lines on the -slant in either a horizontal or curved direction, is somewhat difficult. -These difficulties which arise in the student’s path are, however, -easily to be overcome, and he must not grow faint-hearted if, after -repeated trials, he does not succeed in producing the required effect. -Rather at this juncture let him examine some model by an adept in the -art, comparing his work with it. By these means he will be enabled to -see the points in his own requiring improvement, and then let him -continue to labour perseveringly and diligently until he gains a perfect -command of his knife and materials, and few will be found but will admit -that the result at last obtained fully repays him for his time and -labour. There is no doubt that the art is of very great antiquity, and -that in former times no building of importance was erected without one -having been previously constructed. This not only aided the successful -carrying out of the architect’s drawings, but enabled him and his -employer to judge better as to the general effect the work would have -when completed. - -We have mention made of models as early as 1546, when San Gallo (a pupil -of Bramante, the original architect of St. Peter’s, at Rome), either -himself constructed, or caused to be, a model of his proposed designs -for that magnificent structure, in order that the whole might be carried -out in the same spirit in the event of his death. On this latter event -occurring, the immortal Michael Angelo Buonarotti undertook the -important office of architect to St. Peter’s. One of his first tasks was -to set aside the model of his predecessor, which had occupied many years -in constructing, at a cost of many thousand pounds, while he constructed -himself, at a trifling expense and in a few days, another model of his -intended work. Numerous other instances of the practical utility of this -branch of art might be cited, but the author deems it unnecessary, its -importance being at once obvious; and this little work, though devoid of -all technicalities, too frequently the fault of works of this -description, yet is intended shall be eminently practical. To a large -and increasing body, the architectural assistants, it is hoped that this -little hand-book will prove to be acceptable; and though written -principally for the professional man, it is hoped it may not prove -utterly useless or uninteresting to others, who though not members of -the architectural profession may yet possess sufficient taste and skill -to wish to perpetuate - - A DESIGN IN PAPER. - - - - - PART I. - OF THE MATERIALS REQUIRED. - - -The materials the architectural modeller will require for his work, are, -for the most part, few, simple, and inexpensive. They are also easily -procured at any of the Artists’ Repositories. It is not, therefore, so -much in the material employed, but in the skill displayed in the -working, that the beauties of a model consist. The principle in this -description of modelling being, that every possible part be constructed -of paper, it is necessary that this should be procured of the -description best suited to the nature of the work, and of the best -possible quality. Inferior papers are hard, contain knots and other -imperfections, and are very frequently gritty; this latter imperfection, -by destroying the delicate edge of the knife, prevents the work having -that sharp appearance so much to be desired. The paper I use, and have -always found the best for all purposes, has a surface similar to that of -Whatman’s double-elephant drawing paper, and is, I believe, sold under -the name of Crayon paper: a specimen is bound with this book, forming -the _next page_; it is of a pale cream-colour, bearing a strong -semblance in tint to Bath-stone, but I have procured it from this to the -shades necessary for the roofs of models. It is firm, though not hard, -in texture, and not being too spongy, does not absorb to too great a -degree the paste used in fastening together the sheets for the various -thicknesses required, thus ensuring their firmness, a matter of the -highest importance, otherwise in thin strips consisting of four, five, -or more thicknesses of paper, upon their being cut each would part and -defeat the desired end. - -The most useful tint of this paper is the one already described, as it -can be easily tinted to represent bricks or rubble, &c., should it be -necessary,—for instance, in a building where the quoins, dressings, &c., -were in stone, the rest in random rubble or brick, it would enable you -to mark them with a HHH pencil, and tint before your work was made up. I -have constructed several models in pure white Bristol board, but it is a -tedious hard material to work in, though the result is very fine. - -The next most important auxiliary is an adhesive material for fastening -the sheets together to produce the necessary thicknesses of cardboard, -and to fix the whole together and the several parts in their places. For -the former a paste of flour made in the following manner, will be found -to be the best. To every two tablespoonfuls of the best wheaten flour, -add a teaspoonful of common moist or brown sugar, and a little corrosive -sublimate, the whole to be boiled, and while boiling continually stirred -to prevent lumps, till of the right consistency. If a few drops of some -essential oil, say lavender or peppermint, be added, the usual -mouldiness will not appear, and the paste will keep for a great length -of time. For the latter, a gum must be used, prepared by the following -proportions. To each six ounces of the best gum arabic, add an ounce or -less of moist or lump sugar, one teaspoonful of lavender or other -essential oil, and a table-spoonful of gin, the whole to be mixed in -_cold_ water (no heat being in any way applied) to the consistency of a -thick syrup. - -Other requisites are sheets of mica or talc, to be procured at the -ironmonger’s, and used for windows, skylights, &c.; pieces of soft deal -or beech wood, to form any small detail such as pinnacles to barge -boards, &c., that it may not be advisable or possible to form in paper; -wire, lead, cord, velvet, and numerous other nick-nacks, which will -occur to the modeller as his work proceeds, and which will hereafter, in -their place, be carefully described. - - - - - PART II. - OF THE INSTRUMENTS NECESSARY. - - -The first thing the artist must procure must be a board of fine, -close-grained wood, free from knots, to prepare and cut the several -parts of his work upon. The best for this cutting-board is beech, -sycamore, or pear-tree wood; it should be, at the least, one and a-half -inch thick, by twelve inches broad, and about eighteen inches in length. -I should prefer it even thicker than stated, as continual planing of the -surface to erase the marks of the knife soon reduces its thickness. Let -it be squared perfectly every way to allow the T square to work -accurately along its edge. As before stated, care must be taken, when -the surface has become too much cut up, to have it re-planed, or -otherwise the knife is apt to follow the marks in the board, and cut the -paper irregularly upon the under side. The size of board mentioned will -be found most useful for all ordinary purposes; should the work be of -very large dimensions, of course another must be procured, -proportionally larger. Two or three boards of close-grained deal will -also be found of service for cutting obliquely, &c., &c. - - - THE MODELLING PRESS. - -This apparatus will be found of essential service to the artist, as by -its aid he forms the cardboard which is the basis of his model. It may -be either of iron or wood; the former is lighter, and more elegant in -appearance, but the latter, though plain and homely, is in my opinion -preferable in many respects. A common copying press may be used, care -being taken not to place the damp paper between the iron, but between -two hard, close-grained pieces of wood. On page 27 is an illustration of -the press I use, which any joiner can construct for a few shillings. It -consists of a cross-beam, A, through which the screw passes; two -uprights, B B; a bottom, C, to which, and to the cross-beam, the -uprights must be firmly mortised. Between them is a moveable top-piece, -D, which by means of cord running through two small pulleys, E E, keeps -it pressing continually against the screw; the weight F, at the end of -the cord being slightly heavier than will balance the top-piece. By -these means, as you unwind the screw, either to place under, or look at -the progress of work already there, the top-piece moves out of your way. -The sizes of the wood for the different portions is given, and care must -be observed in not breaking it by too great a pressure of the screw; as -the object of the press is to keep the sheets flatly and firmly -together, while the adhesive material sets, no undue degree of force is -necessary; indeed it will, for reasons hereafter to be described, be -found a disadvantage to press them too closely. - -[Illustration: - - THE MODELLING PRESS. - - SIZES. -] - - C Bottom piece 18 inches by 12 inches by 2 inches. - B B Uprights 12 do. — 4 do. — 1½ do. - A Cross beam 15 do. — 4 do. — 2¼ do. - The screw 1⅜ths inch in diameter. - -[Illustration: - - THE T-SQUARE. -] - -This square is formed like the ordinary drawing-squares, with the -exception that the blade A is made of steel; this is firmly screwed to a -stock of hard wood, which has on each side of the blade a small piece at -C C cut out; the object of this is to allow the knife to cut completely -to the edge of the paper. The advantage, in fact, the necessity for a -steel blade, will be obvious; were it of wood, the pressure of the knife -along its edge would indent, or cut it. This square will be found -adapted for every description of large and small work, but should the -cardboard be of great thickness it is apt to stir, and by so doing cause -irregularity of line. To remedy this an instrument is used, called an -adjusting straight-edge. A is a straight ruler of flat brass, or of -steel, like the blade of the T-square. It is contrived to move to and -from the surface of the board upon the upright screws, B B, while a -dovetail groove is fitted with a piece of brass to run along it, to -allow of the horizontal movement of the ruler. The paper (upon which the -cutting-off line has been previously marked) is placed upon the board, -the straight-edge adjusted to the line; the straight-edge being then -firmly screwed down upon it by means of the two small thumb-screws, 3 3, -it is rendered immoveable during the progress of the work, this will be -better understood from the annexed engraving. - -[Illustration: - - THE ADJUSTING STRAIGHT-EDGE. -] - -No. 1 is a section of the cutting-board, showing the groove in which the -piece of brass runs. 2, The brass, to which is attached the -thumb-screws, by means of a screw through the eye at B. 3 3 3, -Thumb-screws, to screw down the ruler upon the paper. The brass rule -should not be less than an eighth of an inch in thickness, otherwise it -may bend; if steel it will do a little less. - -[Illustration: - - MODELLING KNIVES. -] - -This instrument will be found particularly useful in cutting the -necessary mitres for joining together the edges of the work, or for any -other work of similar description, such as the copings to walls, -mouldings of every description, &c., &c. Having now described these very -important instruments in a way we hope may prove perfectly intelligible, -we proceed to state the requirements in those necessary ones, knives. -The number of these the artist will use, is regulated more by his own -fancy than anything else; but there are three shapes he will find -absolutely necessary. In modelling, as in painting, there are numerous -tricks and contrivances for producing various effects; and as the -painter will often value a bit of old scrubby, worn-down brush, so the -modeller will find various cutting instruments materially assist him, -such as the broken blade of a knife, a steel pen, a bradawl, &c., &c., -many of these producing effects that more elaborate instruments would -have failed doing. On page 33 will be found an engraving representing -three requisite varieties of knives. No. 1. This knife is long in the -blade, and, as will be found in all the others, is perfectly straight on -the cutting edge; this knife is used to cut straight lines in all -directions through strong work, cutting oblique lines, mitres, splays, -&c. No. 2. One for lighter work used in forming or modelling ornaments, -or, in general, cutting work of a lighter and neater character. No. 3. -This blade is used solely for cutting all descriptions of circular work, -and curves of every description. It may be useful to remark that this is -the only shape of blade that will cut, with clearness and sharpness, -curved lines through thick cardboard. The instrument next illustrated is -called a knife compass, and is extremely valuable for cutting out -circular architraves, &c., &c., doing its work in a way that the hand -and knife could not equal, and with the least possible trouble. See -illustration, page 36. They resemble, in some respects, an ordinary pair -of compasses, but of a little stronger make than the common. A is a -moveable sweep of brass, to regulate the opening of the legs of the -compasses, which, being opened to the requisite width, are firmly held -by tightening the thumb-screw, F. B, the moveable leg to which the -cutting-knife C is attached by means of a shoulder to the blade at G, -and a socket at H, into which it fixes, and is secured by the screw at -D. E and I are two screws working on the rod, K, on each side of the -moveable bar, B. - -[Illustration: - - THE KNIFE COMPASS. -] - -By means of this contrivance the knife is always kept perfectly upright, -and in consequence cuts perpendicularly through the cardboard. There may -be several knives to fit in the socket for light and heavy work, but a -blade of the same shape as that shown in the engraving, will be found -sufficient for nearly every purpose. The instrument might perhaps be -more useful if half as large again as represented. The dotted lines are -given to show the instrument open wider, in order fully to illustrate -the utility of the moveable leg at B. The method of using this -instrument is this: Having a curve to cut, and having found the centre -of the arc, place the point of the leg L within it, then adjusting the -moveable leg to the perpendicular by means of the screws I and E, -stretch the legs to the requisite radius, and by gradually increasing -the pressure on the blade, the curve may be cut with the most perfect -ease and truth. - -[Illustration: - - H L Horizontal line. -] - - - - - PART III. - THE COMMENCEMENT AND FINISH OF A MODEL. - - -Assuming that the student has now procured the various instruments and -materials for his work, and that he has also determined upon the design -he intends in paper, the next thing necessary is to give him as far as -it is possible by a book copiously illustrated, an exact description of -the method of proceeding. We will therefore imagine a design which is to -be modelled (see frontispiece), a Villa, in the domestic Italian style, -for example; and taking it to pieces bit by bit, endeavour to raise it -up again in renewed beauty and effect. - -Having the four elevations, together with the ground and roof plans, the -latter being essential to show the position of the chimneys, skylights, -&c., we take a common drawing-board, about the size of the intended -model, and upon it strain as for a drawing that size, a piece of drawing -cartridge, say an inch and a half wider all round than the intended -model is to be. Upon this, when dry, draw an _outline plan_ of the -intended building, not putting in any internal walls, for these will not -be required as this is only to form lines whereon to erect the intended -building. To make it more readily to be understood we have given a -sketch of the outline plan on page 45. - -[Illustration: - - ELEVATIONS OF VILLA. - - ELEVATION OF ENTRANCE. -] - -[Illustration: - - SIDE ELEVATION. -] - -This being completed, we have now the edifice, as it were, set out. The -next matter for consideration is the thickness of the walls; that is, -the requisite thickness of paper we shall require. Suppose we take, as -in the plan given, the outside reveal or recess back of the window -frame, at four inches and a half; this would require four sheets of -paper, but as it is always better to exaggerate slightly in modelling -both projections and recesses, place six or even seven sheets together; -paste them together in twos, putting them as pasted under the press, and -afterwards, when nearly dry, paste them the full thickness required and -subject them once more to the action of the press. The most convenient -size of paper to work at for an ordinary-sized model will be made by -doubling a sheet of the paper as first procured into four. On the paper -becoming perfectly dry, the student must carefully draw each elevation -of the building the full height from the ground line to the top of the -blocking, being particular that every line both perpendicular and -horizontal is perfectly true and square, and marking along faintly the -lines for the cornice, strings, &c., &c., that may occur. This being -done and the whole drawn in, of course not drawing in the window frames -but merely the outline of the square of the window, the side will -present the appearance shown in the accompanying elevation, and which is -merely sketched and not drawn to any scale. - -[Illustration: - - A Lines for cornice. B Lines of upper string. C Ditto lower - cornice. D Ditto Plinth. -] - -[Illustration: - - PLANS OF VILLA. - - GROUND PLAN. - - OUTLINE PLAN. -] - -The four or more elevations having been drawn, proceed to cut out all -windows, doors, and other openings cleanly and accurately. The windows -and their frames must now be made and gummed at the back of the several -openings; where panels occur paper of the same tint must be used, -sometimes the pieces cut from the windows will form very good backing -for such parts. For the window frames take some large-sized cream laid -paper, and colour it to the tint you wish your frames to be. Should a -representation of oak be preferred, it may be imitated successfully -thus: First paint your paper yellow, gamboge and a little burnt sienna -will do, and then prepare a thick colour with Chinese white and burnt -sienna; when the first colour is dry lay this last-mentioned on, and -before _it_ has time to dry grain it by means of a fine comb; a small -tooth comb will answer best for this purpose, and if skilfully performed -a most admirable imitation will be the result. Three or four thicknesses -of paper (cream laid or other white paper) must then be pasted together, -with the oak-coloured one upon the top, and submitted to the action of -the press. - -This paper being ready for use, take one of the pieces cut from the -windows, and mark by it the size of the window-opening, then lightly -draw the frames in and cut them out, if the white paper of the under -sheets should show where cut through sectionally, touch it along with a -little burnt sienna or brown colour. You must now tint another sheet of -the same description of paper blue or neutral, not in an even tint, but -carelessly and artistically leaving bright lights; this when pasted as -for the oak-paper two or three thicknesses, will form the backing to the -frames. Then place the frames face down, on them gummed a sheet of mica; -on that again the blue backing; the whole then to be put in the press, -care being taken not exhibit too much pressure, otherwise you will have -the backing bulge out. It may, perhaps, be thought that these -thicknesses of paper for the frames and backing are unnecessary, and -that one might serve as well; but from experience I can assert, that -unless this method be adopted, that flatness the work should have, will -not be obtained. It may also be as well here to caution the reader -against pressing with too great a degree upon the cardboard when it is -under the action of the press. If too great a pressure is given, the -cardboard will become so hard as to resist all efforts of the knife to -cut through it. The paper usually presses to a little less than an inch, -to a scale of one-eighth of an inch to the foot; so that six thicknesses -or sheets of paper will answer for four and a half of brickwork or -stonework. The doors will be formed first from two thicknesses[1] and -backed with the same. This is for plainest description, but if mouldings -are inserted in the panels, adopt the following:— - -Footnote 1: - - One thickness, two thicknesses, three thicknesses, and so forth, will - be used throughout, to express the number of sheets to be pasted - together. - -[Illustration: - - DETAILS No. 1. - - ELEVATION OF ENTRANCE DOOR. -] - -[Illustration: - - PLAN OF ENTRANCE DOOR. -] - -First draw the door with the extreme size of the opening of each panel, -on a two-thickness sheet; on another two-thickness sheet, draw the same -panels a size smaller; on a third two-thickness sheet, draw them a size -smaller still; these being cut out and placed behind one another, and -finally the backing; will admirably represent mouldings: by producing -three separate lines round the inside of each panel. For work to ⅛ scale -no further trouble will be necessary; but if larger, the mouldings must -be formed before the door is gummed together, as hereafter described for -the formation of mouldings in general. The doors, windows, and backs to -all openings are now ready, but cannot be yet fixed till all the -necessary mitreing is completed, which mitres will be wherever an -outside angle occurs thus, fig. 1. (See page 53, figs. 1 and 2.) - -[Illustration: - - Fig. 1. - - OUTSIDE ANGLE. -] - -[Illustration: - - Fig. 2. - - INSIDE ANGLE. -] - -In the inner angle (see fig. 2) no mitre is required; the end of one -piece being cut square, they may be made to overlap one another. Lay the -piece, whatever it may be you wish to mitre, face down upon the -cutting-board; and then at a distance (equal to the whole thickness of -the cardboard) from the edge draw a line; and at a short distance back -from this line sufficient to let the point of the knife touch it when -held slanting to the required angle, fix the adjusting straight-edge -previously described; screw firmly upon it, and cut through the paper at -an angle of 45°, which will, of course, be by cutting from the line on -the top side of the paper, A, to the extreme edge of the underside, B -(see illustration page 55), which represents the side of a building, and -the piece may be seen curling up as cut from the mitre. Great steadiness -of hand, and a few trials on waste cardboard are necessary before the -operator will perform this skilfully. The straight-edge holding the -paper firmly, it may be cut through at two or three strokes, observing -to hold the knife always at the same angle. All mitreing work finished, -affix the windows at the back, placing the whole under a slight -pressure.[2] Then the model must be blocked up. First cut a number of -squares, all sizes, from waste or other cardboard; let them be perfectly -square; cut these diagonally, and they will form the blocks to hold the -work together at the angles. Now take any two sides that are to be -joined at the mitred angle, and fix them accurately together with gum -pretty thick, so that it may dry while you hold each side in its place. -When set, lay them down and work the others in a similar manner. Take -now the outline plan, and having previously numbered the sides to -correspond with the plan, fix them (by touching slightly their under -edge with gum) to it, and when all are in their places fix, at a -distance apart of an inch and half or so, above one another the -previously described blocking pieces with gum not so thick in -consistency. To make our meaning perfectly plain, we annex an engraving -of the appearance of an internal angle when at this stage of the -proceedings. A piece of wood (deal) about ½ inch thick, should now be -attached to the model from one side to the other (see page 57). This is -for the purpose of fastening the model, when completed, to its stand; it -may be blocked with waste pieces, such as the cuttings from doors, -windows, &c., and gummed firmly. Pieces or strips of cardboard should -also be gummed along in the inside, at the level of the intended gutters -of the house, to rest the roof upon. All portions of the work completed, -we will now assume, are fitted together and in their places. The student -will now be able to form some idea of the general effect his work will -have when finished; but there is yet more—much more—to be done, and work -requiring a still further amount of skill, practice, and patience. - -Footnote 2: - - As there are many little matters during the progress of a model - requiring a slight pressure, a pressure sufficient to hold the pieces - in their several places till dry, I have found weights answer very - well. I have pieces of square lead from one pound upwards covered with - paper; and by covering, the humble brick may be usefully pressed into - this service. - -[Illustration] - -[Illustration: - - SKETCH SHOWING THE WAY THE BLOCKING PIECES ARE INSERTED IN AN INTERNAL - ANGLE. -] - -[Illustration: - - METHOD OF INSERTING THE WOOD STAY. - - A A Cardboard angle stays. B B B B B Wood stay by which the model - is affixed to its stand by a screw passing through at C C. - D E F G Sides of model. -] - -The two principal elevations are given to the same scale as the plan -(page 41); but in order to insure our being understood, the principal -portions of the details are given to a larger scale. - -The cornice next demands our attention, a detail of which is given on -page 61, fig. 1, and in order to model which we proceed thus, the -numbers indicating the various pieces of which it is composed. No. 2 is -a piece worked of the required thickness demanded by the depth of the -cornice from A to B, and the necessary projection, in a sufficient -series of lengths to go entirely round the building. Now, as this is to -be cut through the several thicknesses of paper required, a method must -be found out to hide the different layers that would consequently be -exposed to view; this is by cutting from one or two thicknesses a piece -the whole length of the cornice, forming a facia, 8, and coming slightly -below the depth of the other under piece to 4; thus, while at the same -time it hides the layers of paper, it forms the bed of the cornice. - -The next members, Nos. 1, 3, 5, and 7, are formed, first by preparing -the size and length on the square; secondly, by cutting off at any angle -necessary to get as near to the mould as possible; and, lastly, forming -the mould itself. - -The manner of moulding being applicable to every description of either -Italian or Gothic pattern, we proceed to describe it. - -Procure from the comb-manufacturers some pieces of _ivory_ of various -sizes, and with different files, some round, some square, &c., file on -one end of a square piece the _reverse_ of the mould you require; smooth -it well; and for greater power and convenience, fix it in a handle of -wood. - -[Illustration: - - - DETAILS No. 2. - - 1 Elevation and section of main cornice. 2 Elevation of window. - 2_a_ A detail of section through window. 3 Architrave - mould. 5 Elevation of small window. 5_a_ Section of small - window. 6 Elevation of quoins. 7 Section and elevation of - tower cornice. -] - -[Illustration: - - MOULDING TOOLS. - - A, Handle with socket to secure the moulding tool (1). B, - Thumb-screw. 1, 2, 3, Moulding tools. -] - -Nos. 1, 2, 3, &c., &c., will be found generally available and useful in -the formation of all kinds of mouldings, besides numbers of other shapes -that will occur to the artist. The method of using the instrument is by -indenting the pattern along the edge of the cardboard, guided by means -of the straight-edge. The sharp arris left from the file upon the edge -of the ivory mould, had better be slightly taken off, to prevent the -paper being torn in its passage. - -The circular pediment over windows (fig. 2, page 61) must be modelled on -the flat, and the moulding returned at the ends. When each member is -finished, they must be gummed up and bent to the required curve, over a -circle of cardboard or a cylinder of wood, separately. The panels that -occur form thus: Cut as before directed for doors, the extreme size of -the opening, and at the back place the successive sizes and thicknesses -to form the mouldings, indented into hollows or worked to rounds, &c., -&c., by means of one or more of the moulding tools; to be backed last of -all. - -Commence the preparation of the quoins (fig. 6, p. 61) by cutting pieces -the required thickness and width of both long and short quoins, and in -long strips, with the _height_ of each one marked up its length -previously by the dividers.[3] Cut first the requisite splay at the edge -of the quoin, along the whole length both sides. Cut where marked for -height, and splay top and bottom. They are then finished, and may be at -once fastened to the work. - -Footnote 3: - - The small hair dividers, with the adjusting screw, will be found - extremely useful in modelling work. - -[Illustration: - - CIRCULAR ARCHITRAVES. - - K Keystone. R Radius. H L Horizontal line. -] - -The circular architraves must be formed by cutting, with the little -instrument previously described as a knife-compass (page 36), circles of -different diameters and thicknesses of paper suited to the mould to be -represented; gum together while in the circle, as shown below, the -horizontal divisional line being marked, and the radiating lines for the -insertion of the keystones. When dry cut off by the divisional line, and -then the segments, by the lines at each side of the keystone. The key -must be of paper sufficiently thick to allow of the highest mould of the -architrave abutting against it, and either left plain, cut diamond-wise, -or carved, or any other way the fancy may suggest or the design demand. - -The cantalivers in tower (fig. 7, page 61) and main cornices (fig. 1, -page 61) to be worked by preparing paper the required thickness; then -procuring a piece of very thin copper or lead, mark on it with -considerable accuracy the design of the cantaliver, and cut it out; you -will thus have prepared a mould or templet, which you can place upon the -cardboard, and by running a hard pencil round it, mark each one -precisely the same in size. - -Any portions of the dressings, &c., having curves in them, had better be -cut with knife No. 3[4]; in fact, this is the only shape of blade which -will leave the edge of a curved line after cutting, what is technically -called “sweet.” - -Footnote 4: - - In using this knife, care must be taken to hold it perfectly upright, - nor lean it either to right or left. - -The positions the cantalivers have to occupy along the cornice, must be -checked along and regularly divided. Care must also be taken in gumming -them in their places, as one out of place or leaning would immediately -be detected by a correct eye, and mar completely the effect of the -whole. - -The architrave mould (fig. 3, page 61) next demands our attention. It -will from our former description be readily understood that all -mouldings are formed by representing in paper of various thicknesses -their several component parts. Thus, in the mould last named, we have -first the groundwork of or thickness from A to B; another thickness, -forming the sinking, from C to D; and finally, the mould, E to F. Square -first, the required slant next cut from the edge, and lastly, the slant -hollowed by means of one of the ivory moulding tools. The keystones and -the blocks under the window sills are cut from paper the thickness -required, then splayed down each way from the centre to the sides at -_one_ cut, and with a sharp knife. This operation must be performed with -some dexterity, as it is important that the edges should be sharp and -free from woolliness. This effect can only be obtained by giving one cut -or slice in the direction required: for this purpose use knife No. 1, -which will be found the best for this description of work. Some -modellers use for this purpose a thin chisel with a keen edge; and of -course all means in art are legitimate that produce the desired end; but -we would recommend the use of the knife only, wherever possible, the -modeller’s object being to work with as few tools as possible, and to -trust much to his knife alone. - -[Illustration: - - DETAILS OF WINDOWS. No. 3. - - MORNING ROOM. -] - -[Illustration: - - KITCHEN. -] - -We have, in describing the method of working several important details -connected with the building, and illustrated on page 61, been, we fear, -somewhat premature, and have not sufficiently urged upon the student the -necessity of preparing his groundwork for these details in a perfectly -accurate manner. For, as it is well known, no colouring, however fine, -will in a picture make up for bad and incorrect drawing, so in a model, -walls out of square or windows and other apertures ill-cut will not -present the wished-for appearance, though all the details be most -skilfully and beautifully modelled. Draw in all doors, windows, &c., -&c., with a very hard pencil, in order that the lines may be as fine as -possible, and cut them out with knife No. 1, or No. 2, whichever may be -considered most suitable to the size of opening it is required to cut; -the knife No. 3, as before observed, being used exclusively for curved -and circular work. In cutting out the windows, hold your knife perfectly -upright; and, as you arrive at the end of the cut, let the _edge_ of the -blade be perpendicular, thus avoiding cutting past the line. In cutting -through thick, or indeed even through one thickness of paper, do not be -too anxious to sever the piece with one cut, as this way of proceeding -is almost sure to cause unevenness of line. But commence by _drawing_ a -line, as it were, in the required direction; that the rule may guide it -accurately, press but slightly at first; and as the track of the knife -gets deeper, exert more pressure. Simple as this direction may appear, -it is nevertheless of the utmost practical utility, as will readily be -found upon trial, as it is only by these means that the paper will be -left at the edge clean, sharp, and even. - -[Illustration: - - DETAILS OF GREENHOUSE. No. 1. -] - -The next object we would call attention to is the Greenhouse, page 73, -and state that there are two ways of modelling this very general -appendage to a modern mansion. The first and the simplest method is to -form the backing of blue paper behind the mica. The other, by doing away -with the blue backing, and allowing the mica to remain transparent. The -former method saves some amount of labour; but the latter being in our -opinion the best and most artistic method, we shall proceed to describe -it: First form the pilasters (you will require double the number than -for the opaque backing), and cut them in their length from A to B (see -elevation, page 73), from the commencement of the base mouldings to the -underside of those of the cap. The way of proceeding in modelling cap -and base will be readily understood from the accompanying sketch, where -it will at once be seen better than we can describe. The best way to cut -them is as if they were a window or opening, cutting the piece out of -the centre at A, after having moulded the edge all round. Then dividing -them into two along the line D L as below, fix them in their respective -places. The angle ones must be double, to avoid having to mitre them. A -piece of mica or thin glass cut to the size of the one side is now -taken, and the pilasters and other portions, divisional bars, &c., are -gummed to it, on both sides; and when with the end it is finished, let -it occupy its intended position on the outline plan. - -[Illustration: - - D L Divisional line. -] - -Now proceed to the roof, to be constructed really of iron and glass, to -be modelled of paper and mica: First, bend round a paper or other -cylinder the piece of mica for the roof, and proceed to cut a number of -strips of cardboard for the ribs, which may be coloured any suitable -tint. - -[Illustration: - - DETAILS OF GREENHOUSE. No. 2. - - PART ELEVATION. - Scale ¼ inch one foot. -] - -These are then to be affixed in their places, as shown upon the drawing, -some in thicker, others in thinner paper. A ledge of cardboard must be -left at the back of the blocking, and also on the same level against the -side of the house; this will be for the purpose of resting the roof -upon.[5] The cornice will be constructed in the manner described for the -others; the pieces on the frieze C, C, C (page 73) will be placed on the -required thickness for the return, but the return of the cornice must be -cut in it. The plinth must now be moulded, cut, and fixed; and the whole -is complete. - -Footnote 5: - - This description is for a circular roof; that, however, in the - engraving represents a flat hipped roof. The method of proceeding is - the same, except that for the latter no cylinder is required. - -Chimneys, those great ornaments to a house, at least they should be -rendered so, but, alas! for the taste of some of our modern architects, -are far more frequently the reverse, and what in able hands and with -judicious treatment would prove a crowning feature and a material -assistance to the design, becomes a glaring error and ruins the whole. -So much for the architect: but should he fortunately possess the ability -and taste to produce those necessaries to our comfort, with equal credit -to himself and benefit to the design, how often do we see his work -marred by the introduction of Messrs. Somebody’s patent never-failing -revolving smoke preventer; a hideous monster of some seven feet high, -whirling and screeching upon the slightest appearance of wind. As our -little Handbook has its mission to instruct in the Art of Modelling an -architect’s production, and as smoke-jacks are but little indebted to -him for their uneasy existence, we beg to apologise for this digression, -and resume our original topic. Details of the chimneys will be found -upon page 81 and 83; for the body of the chimney use two thicknesses, -and it will not be found necessary to mitre the join; for, if even -ordinary care be taken, the union will be scarcely perceptible, while -the labour will be considerably diminished. Form any strings, cornices, -&c., &c., that occur, by cutting the piece flat, and then cutting the -square out of the middle to admit of the shaft, slip it over the shaft -or body of the chimney, till it arrives at the position required by the -design, where it is at once to be secured in its place. Perhaps our -meaning may be rendered clearer by the accompanying illustration. A -represents the cornice prepared in the manner described, and only -requiring to be fixed in its place. B, the shaft or body of the chimney -over which the cornice is to be slipped till it arrives at the dotted -lines; the chimneys may be fixed to the roof (shortly to be described) -in the following manner: Should the chimney come on the roof lower down -than the ridge, the bottom of the shaft will have to be cut to the angle -required by the rake of the roof only; but should the chimney be cut -into by the ridge, then the angle will follow that of the roof on both -sides, diverging from the apex. For illustration of this we give the -annexed sketches, page 83. - -[Illustration: - - DETAILS OF CHIMNEYS. -] - -[Illustration: - - DETAILS OF CHIMNEYS. -] - -A represents a chimney, the base of which is cut simply _one way_, to -suit the slope of the roof. B, a chimney into which the ridge cuts, and -the angle cut both ways from the apex. It will, as a general rule, be -found better to put chimneys together with thin paper, even in the -smallest models, a squareness being thus produced not to be obtained -otherwise. The base to be formed out of thickness equal to the -projection, and treated in (as regards fitting it to the roof) a similar -manner to the shaft, so that if the rake of shaft had chanced not to -have been truly cut, there is no need to throw it away, as it could -easily be blocked under with small pieces till straight, the base hiding -all defects underneath. The method of working the strings, cornices, -&c., has already been fully described in those for the tower and main -building. Figs. 1 and 7, page 61. - -Our model now draws near to its completion. We had arrived at a stage -ready for the roof, but stopped for the preparation of the chimneys, in -order that when the roof was completed, they might be at once fixed in -their respective places. The roof may be either scored, or gauged with -paper strips overlapped. The groundwork for either method will be -prepared in the same manner. First cut, as if for a lid or top to fit -the inside of the model, a strong piece of cardboard; let it be just so -that it will slip into its place between the walls, but be prevented -slipping down by the strips or ledge on the level of the gutter, as -described for Greenhouse, page 73. - -[Illustration: - - DETAILS No. 4. - - Fig. 1. -] - -[Illustration: - - Fig. 2. - - B Bottom piece. C Cornice. L Ledge. S S S Slates. - T Top piece. W Wall. - The cross hatching shows the number of separate pieces the cornice is - composed of. -] - -[Illustration: - - Fig. 3. - - ROOF PLAN. -] - -Sections must now be taken in various parts, through the roof, to -ascertain the length of the respective sides. Thus if the angle A B C -(see fig. 1, page 85) represents the rake of the roof, the length of the -side will be found from A to B and B to C. The sides thus formed must be -splayed to fit at the valleys, apex, &c., and at the base splayed and -fixed to the top piece on which the roof plan has been drawn, observing -to leave space enough all round for the gutter. If the pieces on which -the sections have been drawn are cut out, they will answer for internal -stays to the roof. - -The roof plan is given upon page 85, fig. 3, as also an outline section -for the finishing of the roof, fig. 2, page 85; it will explain itself. -The lead flat will be formed by the bottom piece, but it must be covered -by a paper resembling in tint that of the lead itself. When the -groundwork of the roof is completed, it must be covered in imitation of -slates by one or other of the previously-mentioned methods. We will, -however, describe both, leaving the reader to use his own judgment as to -which he may adopt, our preference being for the strips of overlapping -paper. In the simple scoring, proceed to cut out of the slate tinted -paper pieces accurately fitting to the groundwork of the roof, then with -the knife handle score these sides along, as you would ink in the roof -lines in a drawing, closer at the ridge, becoming wider at the base, and -parallel to each other. The latter by cutting layers of paper, gauged -decreasing in size as before directed, fixing them to the groundwork of -the roof beginning at the base, and overlapping them about 1/16th of an -inch; after all, submitting to the press. The roof assumed to be -finished, affix the chimneys, generally make good all imperfections, -&c., and the model is ready for removal to its final destination; cut -therefore the paper it was built upon from the board, and also tear from -the bottom edges the paper that may have adhered to it, holding it by -the wood stay. - -Prepare a piece of dry wood about two or three inches wider all round -than the building itself, cover it with cloth or velvet, the latter -preferable, the best colour green, and cut a small groove out of the -upper edge; this is to receive the glass shade, which construct thus: -procure five pieces of glass, the sizes rendered necessary by your stand -to form a square or oblong shade, and fasten all together by means of -strips of thin paper and gum (the dull gold paper to be procured in -sheets at any of the artists’ repositories will look best) at their -edges. The model must now be secured to the stand, for which purpose the -piece of wood mentioned at page 56 was inserted, a hole is drilled -through the bottom of the stand, and a screw passed through it into the -wood stay. Do not screw the model down too tightly upon the stand, or -you may force away the stay from its fastenings and destroy your work. - -We have now described all the necessary materials and manipulations to -complete in every respect a model similar to the mansion given in the -illustrations, and which, though containing the general detail of a -building of that description, was wanting in numerous varieties of -detail that will occur in many other buildings of the same class more -ornate and considerably more elaborate in design than our example. - -While all our attention is being turned towards Italian architecture, -Gothic must not be forgotten, and though the general method of procedure -is the same for both, yet there are numerous things which exist only in -the latter style, and in consequence demand separate instructions. In -order, therefore, that nothing shall escape being described in the -various styles, that the student may have nothing to retard his -operations, we append the methods of working the various details in the -form of an illustrated glossary, the alphabetical arrangement of which -will, we think, enable the student more readily and quickly to find the -particular information he may require. - - - - - PART IV. - HINTS ON LANDSCAPE GARDENING; LAYING OUT GROUNDS, &c. - - -We have, as yet, proposed to finish the model in the plainest and most -simple way, completely unaided and unadorned by the adjuncts of gardens -or trees. And yet, that models are frequently considerably improved in -appearance by these imitations of natural objects, when taste and skill -go hand in hand, will be admitted by all, but we often see them -completely spoiled by such additions. It is indeed somewhat difficult to -say how far we may venture with propriety upon this path, and where to -draw the line requires some tact; we will not, therefore, lay down any -rule absolutely as to how far the laying out of grounds and the -modelling of the trees, &c., may be admissible, only giving some -instructions for modelling the objects themselves. And though the -grounds are laid out, the picturesque undulations of the surface, the -ponds, flower-beds, arcades, terraces, lawns, shrubs, and trees, -faithfully represented, let it not for one moment be supposed that by so -doing we render what was before a work of art, a mere toy. Far from it. -We do not wish the reader, when he thinks of a model, to remember those -of York Minster, or Strasbourg Cathedral, and which, borne aloft upon -the shoulders of some wandering Italian, tempt the vulgar by the rich -colours of the stained glass inserted in their chalk sides, and -brilliantly illuminated by the light of a farthing candle placed within; -or of the grounds, as bearing any resemblance to those interesting toys -representing a “_castle in cork_,” about an inch high, whose clinging -ivy is represented by one of the largest species of moss, and in whose -luxurious gardens bloom roses two inches in diameter, roses which should -have decked some matron’s cap, but which for the nonce were pressed into -this more noble service. But, to proceed. Balusters of grotesque, -Elizabethan, or other patterns, when cut out of the solid stone, must be -made by gumming the paper in different thicknesses, till that required -is obtained, carefully drawing the pattern, and then cutting out with -knife No. 3. Turned work, as circular pedestals for statues, sundials, -gate-piers, balusters, &c., cannot be successfully imitated in paper, -but are better turned in wood of some light colour, and then tinted with -body colour to the required shade; all work of the same description that -is _square_ may be constructed in exactly the same manner as before -described for chimney-stacks. For a representation of lawns and grassy -slopes, meadow, &c., we may take white velvet, and tint it to any -required shade, or use cloth which can be obtained any shade of green, -or even flock paper may be procured, which, when cleverly laid on the -work, gives an excellent imitation of grass; but of all these methods, -velvet tinted will be found the most effective and best. Water, -represent with looking-glass, or with mica, to the back of which is -gummed paper of suitable tint for the situation of the water. For rocks, -grottoes, &c., take stout white paper, and thoroughly soak it in water -until it is rendered quite pliable, and then with the fingers, pieces of -wood, or any thing that may suggest itself as being useful, mould or -model it to the required shapes fancy or skill may suggest, and -afterwards tint it to resemble nature. An effect better still may be -obtained by gumming it, when perfectly dry, with thick gum, and then -dusting or sprinkling it with fine sand, which may be procured of -various shades. This method adopt also for walks, carriage-drives, or -any place where a representation of road, or gravel, may be required. -Cut out your flower-beds in thin cork, and then burn the upper surface; -this will give the appearance of rich mould, or earth, and also serve as -a good groundwork to stick the shrubs and flowers into. In your trees, -rather aim at a general or suggestive effect, than at much minutiæ of -detail; procure pieces of twigs, and shape them for the trunks and -branches, and then gum on them the smallest-leaved moss, in good outline -to represent nature; this moss will, when perfectly dried, bear tinting -well. Flower-patches, the same moss with a bit of bright scarlet, or -other paper, here and there gummed among it. - -We have now given sufficient general instructions to enable the student -to proceed with this branch, should his fancy lead him; and with these -suggestions, and his own practice, he may in a short time be enabled to -imitate successfully the quaint gardens of the Elizabethan period, or -the more natural taste evinced in the landscape gardening of our own -times. - - ... “Does airy fancy cheat - My mind well pleased with the deceit? - I seem to hear, I seem to move, - And wander through the happy grove, - Where smooth springs flow, and murmuring breeze - Wantons through the waving trees.” - - CREECH. - - - - - PART V. - - - A GLOSSARY - - CONTAINING THE METHODS OF WORKING VARIOUS DETAIL, &c., NOT HITHERTO - DESCRIBED. - - - A. - -ARCH.—As a general rule, every description of arch may be successfully -modelled by means of the knife-compass; each separate moulding that -occurs must consist of separate pieces of paper, the edge of which has -been moulded by one or other of the means described, and these layers -gummed over one another when finished. To make our meaning clearer, in -fig. 1 next page, a section of a cornice is given, as illustrating the -method to be adopted for arches. It will here be seen that it is -composed of six separate pieces, or, more properly speaking, -thicknesses, for each portion will be made of the number of thicknesses -required by its depth; No. 1, the fillet, square, No. 2, the cyma recta, -first splay, as shown by the dotted line; and then press with the -moulding tool to the required shape, and thus proceed with all the other -members. - -This cornice is not drawn to any scale. - -[Illustration: - - - Fig. 1. - - No. 1 Fillet. No. 2 Cyma recta. No. 3 Fillet. No. 4 - Casetto. No. 5 Facia. No. 6 Continuation of facia. - No. 7 Bed mould. -] - -Where deep hollows occur, as in Gothic mouldings, a different method -must be adopted, see fig. 2, the moulding for a Gothic window jamb; here -the deep hollows are constructed by bending thin paper to the required -curve, and gumming it in the right angles, or other angles required. A -and B represent the outside walls of the work, and C C C C the various -angles required by the mouldings. As will be seen, the other mouldings -are formed on the ends of angle-pieces, in the same manner as adopted -for the cornice. - -[Illustration: - - Fig. 2. -] - -ARCHITRAVE.—In forming these, the same method may be adopted as for -cornices, cutting the mouldings separately, and laying them one over the -other in the order in which they come. Circular architraves are easily -and beautifully cut with the knife-compass. - -ACANTHUS.—The method of modelling the leaves of this plant, so much used -in ornamentation, will be afterwards described under the general head of -ornaments. - -ASHLAR.—In representing work of two kinds, namely, quoins of dressed -work, and filling in of random tooled ashlar:—Draw the quoins in with a -H H H pencil, score in the ashlar, and tint as may be desired. - -[Illustration: - - RANDOM ASHLAR. -] - -ASTRAGAL.—First cut your paper square, thus—███; next bevel the edge -thus )██), and then, with one of the hollow ivory moulding tools run -along the edge by pressure, give the intended round. - -ACROTERIA.—May be modelled in exactly the same manner as previously -described for chimney shafts (see page 80, _ante_). - - - B. - -BARGE BOARD.—First determine on the thickness your board is to be, and -then let the paper for it be pressed closer together than that used for -ordinary work; carefully draw the pattern, and cut out with knife No. 3, -splaying the tracery with knives Nos. 1 and 2, and smoothing with an -ivory or agate burnisher. - -[Illustration: - - BARGE BOARD. -] - -BUTTRESS.—If they are to a large scale, say quarter-inch, one foot, they -are best boxed out; the angles carefully and accurately mitred. Less -scale, they may be boxed out of double thickness, as described for -chimney shafts; or, if very small size, they may be cut from the solid. - -[Illustration: - - SIDE VIEW. -] - -[Illustration: - - FRONT VIEW. -] - -BALUSTRADE.—Model the capping as described for cornices, with the -exception, this will be worked upon both faces. - -BLOCKING.—To a cornice. This, if large, is best constructed by being -boxed out. If small in size, cut them out of the solid. - -BRACKET.—Brackets in Gothic work are to be constructed in layers, in a -similar manner as described for cornices; other brackets may be cut from -the solid paper, first by making a pattern, or template, in thin tea -lead, or sheet copper, and marking round the edge upon the paper, -uniformity of size being thus ensured. - - - C. - -CORNICES.—The construction of cornices is fully described in that of the -House, illustrated, and also under the head of Arch, where a cornice is -described as illustrating the formation of moulded arches. - -COINS, or QUOINS; see those described for House, page 64, _ante_; also -Ashlar-work. - -COPING.—If the coping be small scale, cut from the solid by the -adjusting straight-edge; otherwise they are better boxed out. - -CRESTING.—Proceed in much the same manner as described for barge boards; -use a template to save trouble in pencilling out, and cut with knife No. -3; three thicknesses are ample for eighth scale work. - -CUSPS.—See description of Tracery; window-cusps being circular work, No. -3 knife must be used. - -CORBEL.—Refer to Cantilevers in House Tower Cornice, the method of -modelling being the same, except such as are composed of a series of -horizontal mouldings, in which case proceed as for cornices. - -CONSOLE.—The console given for example is composed vertically of five -separate pieces; horizontally of two, each separate part receiving its -proper form, and when completed, gummed together. - -[Illustration] - -CAPITAL, CORINTHIAN.—We choose for illustrating the method adopted for -modelling capitals, a Corinthian one, as most useful for our purpose. -The example given is from the Temple of Vesta, at Tivoli, a beautiful -and peculiar example, to model which proceed thus - -[Illustration: - - A A A Flowers in the abacus. 1 2 3 Abacus. B B Volutes. - C C Caulicoles. C* Bell. 1 2 3 Astragal. D D D - Flutes. -] - -Compose the abacus of three layers, 1, ovolo, 2, fillet, 3, cyma; then -the bell of the capital must be turned out of some close-grained wood, -and attached to the astragal, composed of three pieces, 1, fillet, 2, -astragal, 3, fillet. The leaves are then to be modelled, as described -under the head of ornaments, also the flower in the abacus; the volutes -and caulicoles in a similar manner to that described for consoles. When -all are prepared, they must be fixed most accurately in their places. -The bell of the capital must be tinted previously, to resemble in colour -the rest of the work. - -[Illustration] - -COLUMN, CIRCULAR.—This description of columns must be formed out of very -thin paper, rolled as close as possible to the required lengths and -diameters, thinning the paper at the extreme edge with a very sharp -knife to conceal the join. If the columns are too small to be cleverly -rolled, they may be turned as described for balusters; should the -columns (as in classic work,) diminish, then procure a wood core to roll -the paper round, and when the paper is gummed and dry, withdraw the -core. It will now be obvious that combinations of various descriptions -occurring so frequently in Gothic work, may easily be represented as -this column in plan, being nothing more than four rolls joined together. -If the columns are too small for paper, turn shafts, bases, and caps at -once; by this means much unnecessary trouble will be saved, and a -superior effect produced. - - - D. - -DENTILS.—Model dentils in the same manner as previously described for -brackets, cantilevers, &c. - -DOME.—Whatever the shape of the dome you wish to model may be, a pattern -on which to form it had best be turned in wood; this forms a basis upon -which the paper casing may remain until dry, and then the mould may be -removed. It has not been thought necessary within the limits of this -work to include the development of the various shapes of domes and -cupolas, the student being deemed master of this branch of science. If, -however, he should not be, any work on practical geometry will supply -his wants. - -DOORS.—A copious description of the manner of modelling doors is given -in those described for the House, page 51, _ante_. - - - F. - -FLUTES.—In order to flute a column, we proceed thus: first roll the -column up as before described, taking care to have it smaller than if -plain, to allow the fluted piece to make up the required diameter; then -prepare a piece of paper (one thickness will do), cut it of sufficient -size to go once round the column, and join exactly; upon this piece -carefully space or mark out the divisions of the flutings. Now procure a -piece of soft straight-grained _deal_, perfectly free from knots, and -with some blunt, round-headed instrument (one of the modelling tools, or -a piece of ivory filed smooth,) indent the wood with a groove the exact -length of the required flute, upon which (the paper having been -previously _damped_ only), press it into the wood groove all along the -flute with the same tool the groove was made with, and so proceed with -each in succession, gumming them to the column when dry. - - - H. - -HOLLOWS.—In forming hollows in mouldings, &c., if large, proceed as -described under the head of Arch; if small, first cut by means of the -“adjusting straight-edge,” an angle, thus, =V=; and then with a curved -ivory tool give it the required concavity by pressure along the whole -length of the previously cut angle. - -HOOD MOULD.—These may be cut with the “knife-compass,” and the mouldings -worked by fitting a piece of ivory filed to the required form in lieu of -the knife; they must be slightly gummed upon the underside to the -cutting-board, to keep them steady while being worked. - - - I. - -IRONWORK.—May be represented in either paper, tea-lead, thin sheet -copper, or wire, depending on size and form; perhaps the easiest and -best material for general purposes is tea-lead, _i. e._, the lead with -which the tea chests are lined. - - - O. - -ORNAMENTS.—Under this head is included every description of foliage, -leaves, &c. All the leaves, &c., must be carefully drawn and cut out, -and then indented on either side, as concavity or convexity is desired, -in a similar manner to the operation of fluting a column, with the -different _ivory_ modelling tools on a piece of soft yielding deal. -Bosses, crocketts, finials, festoons, wreaths, in short every -description of foliage, and even sculpture in bas-relief, may be -beautifully modelled by these simple means. - - - T. - -TRACERY WINDOW.—The general method of modelling windows of this -description is very simple, but the practice difficult. First, paper -upon which you intend to cut out any tracery, must be _pressed_ closer -together than that used for ordinary work, so as to afford more -assistance to the knife when cutting on the splay. Having drawn the -design of your window, proceed to cut out all the interstices with knife -No. 3; then splay down from the nosing with knives Nos. 1 and 2, as each -may be found useful, cutting through with one stroke, or rather with a -succession of short strokes right through on the slant, boldly and -without leaving a jagged edge; afterwards smooth your work with ivory or -agate. You had better place the pieces that came from between the -mullions while cutting the splay, in their places again between the -mullions, to offer resistance to the knife and prevent them bending. The -eyes may be successfully formed by packing-needles of diamond shape, -fixed in a handle. - - - END OF THE GLOSSARY. - - - - - TO THE READER. - - -It will have afforded the Author sincere gratification if the contents -of this little work have found favour in the eyes of the Reader, and -have been a ready help to him in his efforts in Architectural Modelling. -Next to the pleasure of learning, is that of imparting knowledge. The -Author has endeavoured, to the best of his ability, to render all his -instructions clear and practical, at the same time divesting them of all -unnecessary technicalities, and rendering them as terse as possible. - - - FINIS. - - - - - LONDON: - BRADBURY AND EVANS, PRINTERS, WHITEFRIARS. - ------------------------------------------------------------------------- - - - - - TRANSCRIBER’S NOTES - - - 1. Item number 4 was not included in the caption on p. 61. - 2. Silently corrected typographical errors. - 3. Retained anachronistic and non-standard spellings as printed. - 4. Enclosed italics font in _underscores_. - 5. Enclosed bold font in =equals=. - - - - - -End of the Project Gutenberg EBook of The Art of Architectural Modelling in -Paper, by T. A. Richardson - -*** END OF THIS PROJECT GUTENBERG EBOOK ARCHITECTURAL MODELLING IN PAPER *** - -***** This file should be named 54340-0.txt or 54340-0.zip ***** -This and all associated files of various formats will be found in: - http://www.gutenberg.org/5/4/3/4/54340/ - -Produced by Richard Tonsing, deaurider and the Online -Distributed Proofreading Team at http://www.pgdp.net (This -file was produced from images generously made available -by The Internet Archive) - - -Updated editions will replace the previous one--the old editions -will be renamed. - -Creating the works from public domain print editions means that no -one owns a United States copyright in these works, so the Foundation -(and you!) can copy and distribute it in the United States without -permission and without paying copyright royalties. Special rules, -set forth in the General Terms of Use part of this license, apply to -copying and distributing Project Gutenberg-tm electronic works to -protect the PROJECT GUTENBERG-tm concept and trademark. Project -Gutenberg is a registered trademark, and may not be used if you -charge for the eBooks, unless you receive specific permission. If you -do not charge anything for copies of this eBook, complying with the -rules is very easy. You may use this eBook for nearly any purpose -such as creation of derivative works, reports, performances and -research. They may be modified and printed and given away--you may do -practically ANYTHING with public domain eBooks. Redistribution is -subject to the trademark license, especially commercial -redistribution. - - - -*** START: FULL LICENSE *** - -THE FULL PROJECT GUTENBERG LICENSE -PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK - -To protect the Project Gutenberg-tm mission of promoting the free -distribution of electronic works, by using or distributing this work -(or any other work associated in any way with the phrase "Project -Gutenberg"), you agree to comply with all the terms of the Full Project -Gutenberg-tm License (available with this file or online at -http://gutenberg.org/license). - - -Section 1. General Terms of Use and Redistributing Project Gutenberg-tm -electronic works - -1.A. By reading or using any part of this Project Gutenberg-tm -electronic work, you indicate that you have read, understand, agree to -and accept all the terms of this license and intellectual property -(trademark/copyright) agreement. If you do not agree to abide by all -the terms of this agreement, you must cease using and return or destroy -all copies of Project Gutenberg-tm electronic works in your possession. -If you paid a fee for obtaining a copy of or access to a Project -Gutenberg-tm electronic work and you do not agree to be bound by the -terms of this agreement, you may obtain a refund from the person or -entity to whom you paid the fee as set forth in paragraph 1.E.8. - -1.B. "Project Gutenberg" is a registered trademark. It may only be -used on or associated in any way with an electronic work by people who -agree to be bound by the terms of this agreement. There are a few -things that you can do with most Project Gutenberg-tm electronic works -even without complying with the full terms of this agreement. See -paragraph 1.C below. There are a lot of things you can do with Project -Gutenberg-tm electronic works if you follow the terms of this agreement -and help preserve free future access to Project Gutenberg-tm electronic -works. See paragraph 1.E below. - -1.C. The Project Gutenberg Literary Archive Foundation ("the Foundation" -or PGLAF), owns a compilation copyright in the collection of Project -Gutenberg-tm electronic works. Nearly all the individual works in the -collection are in the public domain in the United States. If an -individual work is in the public domain in the United States and you are -located in the United States, we do not claim a right to prevent you from -copying, distributing, performing, displaying or creating derivative -works based on the work as long as all references to Project Gutenberg -are removed. Of course, we hope that you will support the Project -Gutenberg-tm mission of promoting free access to electronic works by -freely sharing Project Gutenberg-tm works in compliance with the terms of -this agreement for keeping the Project Gutenberg-tm name associated with -the work. You can easily comply with the terms of this agreement by -keeping this work in the same format with its attached full Project -Gutenberg-tm License when you share it without charge with others. - -1.D. The copyright laws of the place where you are located also govern -what you can do with this work. Copyright laws in most countries are in -a constant state of change. If you are outside the United States, check -the laws of your country in addition to the terms of this agreement -before downloading, copying, displaying, performing, distributing or -creating derivative works based on this work or any other Project -Gutenberg-tm work. The Foundation makes no representations concerning -the copyright status of any work in any country outside the United -States. - -1.E. Unless you have removed all references to Project Gutenberg: - -1.E.1. The following sentence, with active links to, or other immediate -access to, the full Project Gutenberg-tm License must appear prominently -whenever any copy of a Project Gutenberg-tm work (any work on which the -phrase "Project Gutenberg" appears, or with which the phrase "Project -Gutenberg" is associated) is accessed, displayed, performed, viewed, -copied or distributed: - -This eBook is for the use of anyone anywhere at no cost and with -almost no restrictions whatsoever. You may copy it, give it away or -re-use it under the terms of the Project Gutenberg License included -with this eBook or online at www.gutenberg.org/license - -1.E.2. If an individual Project Gutenberg-tm electronic work is derived -from the public domain (does not contain a notice indicating that it is -posted with permission of the copyright holder), the work can be copied -and distributed to anyone in the United States without paying any fees -or charges. If you are redistributing or providing access to a work -with the phrase "Project Gutenberg" associated with or appearing on the -work, you must comply either with the requirements of paragraphs 1.E.1 -through 1.E.7 or obtain permission for the use of the work and the -Project Gutenberg-tm trademark as set forth in paragraphs 1.E.8 or -1.E.9. - -1.E.3. If an individual Project Gutenberg-tm electronic work is posted -with the permission of the copyright holder, your use and distribution -must comply with both paragraphs 1.E.1 through 1.E.7 and any additional -terms imposed by the copyright holder. Additional terms will be linked -to the Project Gutenberg-tm License for all works posted with the -permission of the copyright holder found at the beginning of this work. - -1.E.4. Do not unlink or detach or remove the full Project Gutenberg-tm -License terms from this work, or any files containing a part of this -work or any other work associated with Project Gutenberg-tm. - -1.E.5. Do not copy, display, perform, distribute or redistribute this -electronic work, or any part of this electronic work, without -prominently displaying the sentence set forth in paragraph 1.E.1 with -active links or immediate access to the full terms of the Project -Gutenberg-tm License. - -1.E.6. You may convert to and distribute this work in any binary, -compressed, marked up, nonproprietary or proprietary form, including any -word processing or hypertext form. However, if you provide access to or -distribute copies of a Project Gutenberg-tm work in a format other than -"Plain Vanilla ASCII" or other format used in the official version -posted on the official Project Gutenberg-tm web site (www.gutenberg.org), -you must, at no additional cost, fee or expense to the user, provide a -copy, a means of exporting a copy, or a means of obtaining a copy upon -request, of the work in its original "Plain Vanilla ASCII" or other -form. Any alternate format must include the full Project Gutenberg-tm -License as specified in paragraph 1.E.1. - -1.E.7. Do not charge a fee for access to, viewing, displaying, -performing, copying or distributing any Project Gutenberg-tm works -unless you comply with paragraph 1.E.8 or 1.E.9. - -1.E.8. You may charge a reasonable fee for copies of or providing -access to or distributing Project Gutenberg-tm electronic works provided -that - -- You pay a royalty fee of 20% of the gross profits you derive from - the use of Project Gutenberg-tm works calculated using the method - you already use to calculate your applicable taxes. The fee is - owed to the owner of the Project Gutenberg-tm trademark, but he - has agreed to donate royalties under this paragraph to the - Project Gutenberg Literary Archive Foundation. Royalty payments - must be paid within 60 days following each date on which you - prepare (or are legally required to prepare) your periodic tax - returns. Royalty payments should be clearly marked as such and - sent to the Project Gutenberg Literary Archive Foundation at the - address specified in Section 4, "Information about donations to - the Project Gutenberg Literary Archive Foundation." - -- You provide a full refund of any money paid by a user who notifies - you in writing (or by e-mail) within 30 days of receipt that s/he - does not agree to the terms of the full Project Gutenberg-tm - License. You must require such a user to return or - destroy all copies of the works possessed in a physical medium - and discontinue all use of and all access to other copies of - Project Gutenberg-tm works. - -- You provide, in accordance with paragraph 1.F.3, a full refund of any - money paid for a work or a replacement copy, if a defect in the - electronic work is discovered and reported to you within 90 days - of receipt of the work. - -- You comply with all other terms of this agreement for free - distribution of Project Gutenberg-tm works. - -1.E.9. If you wish to charge a fee or distribute a Project Gutenberg-tm -electronic work or group of works on different terms than are set -forth in this agreement, you must obtain permission in writing from -both the Project Gutenberg Literary Archive Foundation and Michael -Hart, the owner of the Project Gutenberg-tm trademark. Contact the -Foundation as set forth in Section 3 below. - -1.F. - -1.F.1. Project Gutenberg volunteers and employees expend considerable -effort to identify, do copyright research on, transcribe and proofread -public domain works in creating the Project Gutenberg-tm -collection. Despite these efforts, Project Gutenberg-tm electronic -works, and the medium on which they may be stored, may contain -"Defects," such as, but not limited to, incomplete, inaccurate or -corrupt data, transcription errors, a copyright or other intellectual -property infringement, a defective or damaged disk or other medium, a -computer virus, or computer codes that damage or cannot be read by -your equipment. - -1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the "Right -of Replacement or Refund" described in paragraph 1.F.3, the Project -Gutenberg Literary Archive Foundation, the owner of the Project -Gutenberg-tm trademark, and any other party distributing a Project -Gutenberg-tm electronic work under this agreement, disclaim all -liability to you for damages, costs and expenses, including legal -fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT -LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE -PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE -TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE -LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR -INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH -DAMAGE. - -1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a -defect in this electronic work within 90 days of receiving it, you can -receive a refund of the money (if any) you paid for it by sending a -written explanation to the person you received the work from. If you -received the work on a physical medium, you must return the medium with -your written explanation. The person or entity that provided you with -the defective work may elect to provide a replacement copy in lieu of a -refund. If you received the work electronically, the person or entity -providing it to you may choose to give you a second opportunity to -receive the work electronically in lieu of a refund. If the second copy -is also defective, you may demand a refund in writing without further -opportunities to fix the problem. - -1.F.4. Except for the limited right of replacement or refund set forth -in paragraph 1.F.3, this work is provided to you 'AS-IS' WITH NO OTHER -WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE. - -1.F.5. Some states do not allow disclaimers of certain implied -warranties or the exclusion or limitation of certain types of damages. -If any disclaimer or limitation set forth in this agreement violates the -law of the state applicable to this agreement, the agreement shall be -interpreted to make the maximum disclaimer or limitation permitted by -the applicable state law. The invalidity or unenforceability of any -provision of this agreement shall not void the remaining provisions. - -1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the -trademark owner, any agent or employee of the Foundation, anyone -providing copies of Project Gutenberg-tm electronic works in accordance -with this agreement, and any volunteers associated with the production, -promotion and distribution of Project Gutenberg-tm electronic works, -harmless from all liability, costs and expenses, including legal fees, -that arise directly or indirectly from any of the following which you do -or cause to occur: (a) distribution of this or any Project Gutenberg-tm -work, (b) alteration, modification, or additions or deletions to any -Project Gutenberg-tm work, and (c) any Defect you cause. - - -Section 2. Information about the Mission of Project Gutenberg-tm - -Project Gutenberg-tm is synonymous with the free distribution of -electronic works in formats readable by the widest variety of computers -including obsolete, old, middle-aged and new computers. It exists -because of the efforts of hundreds of volunteers and donations from -people in all walks of life. - -Volunteers and financial support to provide volunteers with the -assistance they need, are critical to reaching Project Gutenberg-tm's -goals and ensuring that the Project Gutenberg-tm collection will -remain freely available for generations to come. In 2001, the Project -Gutenberg Literary Archive Foundation was created to provide a secure -and permanent future for Project Gutenberg-tm and future generations. -To learn more about the Project Gutenberg Literary Archive Foundation -and how your efforts and donations can help, see Sections 3 and 4 -and the Foundation web page at http://www.pglaf.org. - - -Section 3. Information about the Project Gutenberg Literary Archive -Foundation - -The Project Gutenberg Literary Archive Foundation is a non profit -501(c)(3) educational corporation organized under the laws of the -state of Mississippi and granted tax exempt status by the Internal -Revenue Service. The Foundation's EIN or federal tax identification -number is 64-6221541. Its 501(c)(3) letter is posted at -http://pglaf.org/fundraising. Contributions to the Project Gutenberg -Literary Archive Foundation are tax deductible to the full extent -permitted by U.S. federal laws and your state's laws. - -The Foundation's principal office is located at 4557 Melan Dr. S. -Fairbanks, AK, 99712., but its volunteers and employees are scattered -throughout numerous locations. Its business office is located at -809 North 1500 West, Salt Lake City, UT 84116, (801) 596-1887, email -business@pglaf.org. Email contact links and up to date contact -information can be found at the Foundation's web site and official -page at http://pglaf.org - -For additional contact information: - Dr. Gregory B. Newby - Chief Executive and Director - gbnewby@pglaf.org - - -Section 4. Information about Donations to the Project Gutenberg -Literary Archive Foundation - -Project Gutenberg-tm depends upon and cannot survive without wide -spread public support and donations to carry out its mission of -increasing the number of public domain and licensed works that can be -freely distributed in machine readable form accessible by the widest -array of equipment including outdated equipment. Many small donations -($1 to $5,000) are particularly important to maintaining tax exempt -status with the IRS. - -The Foundation is committed to complying with the laws regulating -charities and charitable donations in all 50 states of the United -States. Compliance requirements are not uniform and it takes a -considerable effort, much paperwork and many fees to meet and keep up -with these requirements. We do not solicit donations in locations -where we have not received written confirmation of compliance. To -SEND DONATIONS or determine the status of compliance for any -particular state visit http://pglaf.org - -While we cannot and do not solicit contributions from states where we -have not met the solicitation requirements, we know of no prohibition -against accepting unsolicited donations from donors in such states who -approach us with offers to donate. - -International donations are gratefully accepted, but we cannot make -any statements concerning tax treatment of donations received from -outside the United States. U.S. laws alone swamp our small staff. - -Please check the Project Gutenberg Web pages for current donation -methods and addresses. Donations are accepted in a number of other -ways including checks, online payments and credit card donations. -To donate, please visit: http://pglaf.org/donate - - -Section 5. General Information About Project Gutenberg-tm electronic -works. - -Professor Michael S. Hart is the originator of the Project Gutenberg-tm -concept of a library of electronic works that could be freely shared -with anyone. For thirty years, he produced and distributed Project -Gutenberg-tm eBooks with only a loose network of volunteer support. - - -Project Gutenberg-tm eBooks are often created from several printed -editions, all of which are confirmed as Public Domain in the U.S. -unless a copyright notice is included. Thus, we do not necessarily -keep eBooks in compliance with any particular paper edition. - - -Most people start at our Web site which has the main PG search facility: - - http://www.gutenberg.org - -This Web site includes information about Project Gutenberg-tm, -including how to make donations to the Project Gutenberg Literary -Archive Foundation, how to help produce our new eBooks, and how to -subscribe to our email newsletter to hear about new eBooks. diff --git a/old/54340-0.zip b/old/54340-0.zip Binary files differdeleted file mode 100644 index c1253ea..0000000 --- a/old/54340-0.zip +++ /dev/null diff --git a/old/54340-h.zip b/old/54340-h.zip Binary files differdeleted file mode 100644 index a7cc3cb..0000000 --- a/old/54340-h.zip +++ /dev/null diff --git a/old/54340-h/54340-h.htm b/old/54340-h/54340-h.htm deleted file mode 100644 index 7e44a3a..0000000 --- a/old/54340-h/54340-h.htm +++ /dev/null @@ -1,2733 +0,0 @@ -<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" - "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> -<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> - <head> - <meta http-equiv="Content-Type" content="text/html;charset=UTF-8" /> - <title>The Project Gutenberg eBook of The Art of Architectural Modelling in Paper, by T. A. Richardson,</title> - <link rel="coverpage" href="images/cover.jpg" /> - <style type="text/css"> - body { margin-left: 8%; margin-right: 10%; } - h1 { text-align: center; font-weight: bold; font-size: xx-large; } - h2 { text-align: center; font-weight: bold; font-size: x-large; } - h3 { text-align: center; font-weight: bold; font-size: large; } - .pageno { right: 1%; font-size: x-small; background-color: inherit; color: silver; - text-indent: 0em; text-align: right; position: absolute; - border: thin solid silver; padding: .1em .2em; font-style: normal; - font-variant: normal; font-weight: normal; text-decoration: none; } - p { text-indent: 0; margin-top: 0.5em; margin-bottom: 0.5em; text-align: justify; } - sup { vertical-align: top; font-size: 0.6em; } - .fss { font-size: 75%; } - .sc { font-variant: small-caps; } - .large { font-size: large; } - .xlarge { font-size: x-large; } - .small { font-size: small; } - .xxsmall { font-size: xx-small; } - .lg-container-b { text-align: center; } - @media handheld { .lg-container-b { clear: both; } } - .lg-container-l { text-align: left; } - @media handheld { .lg-container-l { clear: both; } } - .lg-container-r { text-align: right; } - @media handheld { .lg-container-r { clear: both; } } - .linegroup { display: inline-block; text-align: left; } - @media handheld { .linegroup { display: block; margin-left: 1.5em; } } - .linegroup .group { margin: 1em auto; } - .linegroup .line { text-indent: -3em; padding-left: 3em; } - div.linegroup > :first-child { margin-top: 0; } - .linegroup .in34 { padding-left: 20.0em; } - .ol_1 li {padding-left: 1em; text-indent: -1em; } - ol.ol_1 {padding-left: 0; margin-left: 2.78%; margin-top: .5em; - margin-bottom: .5em; list-style-type: decimal; } - div.footnote {margin-left: 2.5em; } - div.footnote > :first-child { margin-top: 1em; } - div.footnote .label { display: inline-block; width: 0em; text-indent: -2.5em; - text-align: right; } - div.pbb { page-break-before: always; } - hr.pb { border: none; border-bottom: thin solid; margin-bottom: 1em; } - @media handheld { hr.pb { display: none; } } - .chapter { clear: both; page-break-before: always; } - .figcenter { clear: both; max-width: 100%; margin: 2em auto; text-align: center; } - .figleft { clear: left; float: left; max-width: 100%; margin: 0.5em 1em 1em 0; - text-align: left; } - .figright { clear: right; float: right; max-width: 100%; margin: 0.5em 0 1em 1em; - text-align: right; } - div.figcenter p { text-align: center; text-indent: 0; } - div.figleft p { text-align: center; text-indent: 0; } - div.figright p { text-align: center; text-indent: 0; } - @media handheld { .figleft { float: left; } } - @media handheld { .figright { float: right; } } - .figcenter img { max-width: 100%; height: auto; } - .figleft img { max-width: 100%; height: auto; } - .figright img { max-width: 100%; height: auto; } - .id001 { width:60%; } - .id002 { width:40%; } - .id003 { width:30%; } - .id004 { width:51%; } - .id005 { width:46%; } - .id006 { width:44%; } - .id007 { width:53%; } - .id008 { width:7%; } - @media handheld { .id001 { margin-left:20%; width:60%; } } - @media handheld { .id002 { margin-left:30%; width:40%; } } - @media handheld { .id003 { margin-left:35%; width:30%; } } - @media handheld { .id004 { width:51%; } } - @media handheld { .id005 { width:46%; } } - @media handheld { .id006 { width:44%; } } - @media handheld { .id007 { width:53%; } } - @media handheld { .id008 { width:7%; } } - .ic001 { width:100%; } - .ig001 { width:100%; } - .table0 { margin: auto; margin-top: 2em; } - .table1 { margin: auto; } - .nf-center { text-align: center; } - .nf-center-c1 { text-align: left; margin: 1em 0; } - .c000 { margin-top: 0.5em; margin-bottom: 0.5em; } - .c001 { page-break-before: always; margin-top: 4em; } - .c002 { margin-top: 2em; } - .c003 { margin-top: 1em; } - .c004 { margin-top: 4em; } - .c005 { page-break-before:auto; margin-top: 4em; } - .c006 { margin-top: 2em; margin-bottom: 0.5em; } - .c007 { vertical-align: top; text-align: left; text-indent: -1em; - padding-left: 1em; padding-right: 1em; } - .c008 { vertical-align: top; text-align: right; } - .c009 { text-align: center; } - .c010 { page-break-before: always; margin-top: 2em; } - .c011 { margin-top: 1em; margin-bottom: 0.5em; } - .c012 { vertical-align: top; text-align: left; padding-right: 1em; } - .c013 { vertical-align: top; text-align: center; padding-right: 1em; } - .c014 { vertical-align: top; text-align: right; padding-right: 1em; } - .c015 { vertical-align: top; text-align: center; } - .c016 { text-decoration: none; } - .c017 { font-size: 90%; } - div.tnotes { padding-left:1em;padding-right:1em;background-color:#E3E4FA; - border:1px solid silver; margin:2em 10% 0 10%; } - .covernote { visibility: hidden; display: none; } - div.tnotes p { text-align:left; } - @media handheld { .covernote { visibility: visible; display: block;} } - img {max-width: 100%; height:auto; } - .ph1 { text-indent: 0em; font-weight: bold; font-size: xx-large; - margin: .67em auto; } - .texth { height:1em; } - </style> - </head> - <body> - - -<pre> - -The Project Gutenberg EBook of The Art of Architectural Modelling in Paper, by -T. A. Richardson - -This eBook is for the use of anyone anywhere at no cost and with -almost no restrictions whatsoever. You may copy it, give it away or -re-use it under the terms of the Project Gutenberg License included -with this eBook or online at www.gutenberg.org/license - - -Title: The Art of Architectural Modelling in Paper - -Author: T. A. Richardson - -Release Date: March 11, 2017 [EBook #54340] - -Language: English - -Character set encoding: UTF-8 - -*** START OF THIS PROJECT GUTENBERG EBOOK ARCHITECTURAL MODELLING IN PAPER *** - - - - -Produced by Richard Tonsing, deaurider and the Online -Distributed Proofreading Team at http://www.pgdp.net (This -file was produced from images generously made available -by The Internet Archive) - - - - - - -</pre> - - -<div class='tnotes covernote'> - -<p class='c000'><strong>Transcriber's Note:</strong></p> - -<p class='c000'>The cover image was created by the transcriber and is placed in the public domain.</p> - -</div> - -<div class='figcenter id001'> -<img src='images/i_frontispiece.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>FRONTISPIECE.</p> -</div> -</div> - -<div class='figcenter id002'> -<img src='images/i_title.jpg' alt='' class='ig001' /> -</div> - -<div> - <h1 class='c001'><span class='xlarge'>THE ART</span><br /> <br /> <span class='large'>OF</span><br /> <br /> ARCHITECTURAL MODELLING<br /> <br /> <span class='xlarge'>IN PAPER.</span></h1> -</div> - -<div class='nf-center-c1'> -<div class='nf-center c002'> - <div><span class='small'>BY</span></div> - <div class='c003'><span class='xlarge'>T. A. RICHARDSON,</span></div> - <div class='c003'><span class='small'>ARCHITECT.</span></div> - <div class='c002'>WITH ILLUSTRATIONS DESIGNED BY THE AUTHOR, AND ENGRAVED BY O. JEWITT.</div> - <div class='c002'><span class='large'>LONDON:</span></div> - <div><span class='large'>JOHN WEALE, 59, HIGH HOLBORN.</span></div> - <div><span class='large'>1859.</span></div> - </div> -</div> - -<div class='nf-center-c1'> -<div class='nf-center c004'> - <div>LONDON:</div> - <div>BRADBURY AND EVANS, PRINTERS, WHITEFRIARS.</div> - </div> -</div> - -<div class='pbb'> - <hr class='pb c003' /> -</div> - -<div class='chapter'> - <span class='pageno' id='Page_iii'>iii</span> - <h2 class='c005'>PREFACE.</h2> -</div> - -<p class='c006'>In offering the following practical dissertation -(the first ever yet published) upon the Art of -Architectural Modelling, the Author feels that he -is supplying a want that must have been long felt -by many students and others in the architectural -profession. The utility of the “Model,” coupled -with its beauty, is ample recommendation of the -study; and the modeller will be able to furnish -the architect with sure and certain means that -he may find weighty difficulties surmounted, -especially in the case of uncomprehending clients, -by giving to them the designs of their edifices -<span class='pageno' id='Page_iv'>iv</span>with a distinctness almost equal to the real -work when completed. With many clients, even -“perspectives” are poorly understood, which -seldom fails to cause some slight dissatisfaction -on their part when they see too late certain things -that the eye would have detected in the model -and corrected in the outset. Models are becoming -very general, where buildings are subjects of -competition; and as this course of procedure and -honourable encounter bids fair (when weeded of -some of its present objections) to open up a good -and honourable system, whereby the “race <em>may -be</em> to the swift,” the importance of the following -brief and simple Treatise on the subject, becomes -doubly clear.</p> - -<div class='lg-container-r'> - <div class='linegroup'> - <div class='group'> - <div class='line'>T. A. R.</div> - </div> - </div> -</div> - -<div class='lg-container-l'> - <div class='linegroup'> - <div class='group'> - <div class='line'><span class='sc'>Chester</span>, <em>March, 1859</em>.</div> - </div> - </div> -</div> - -<div class='chapter'> - <span class='pageno' id='Page_v'>v</span> - <h2 class='c005'>CONTENTS.</h2> -</div> - -<table class='table0' summary='CONTENTS'> - <tr> - <th class='c007'></th> - <th class='c008'>PAGE</th> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Preface</span></td> - <td class='c008'><a href='#Page_iii'>iii</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Introduction</span></td> - <td class='c008'><a href='#Page_13'>13</a></td> - </tr> - <tr><td> </td></tr> - <tr><td> </td></tr> - <tr><td class='c009' colspan='2'>PART I.</td></tr> - <tr><td> </td></tr> - <tr><td class='c009' colspan='2'>OF THE MATERIALS REQUIRED.</td></tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Paper</span></td> - <td class='c008'><a href='#Page_19'>19</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Adhesive Material</span></td> - <td class='c008'><a href='#Page_21'>21</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Other Requisites</span></td> - <td class='c008'><a href='#Page_22'>22</a></td> - </tr> - <tr><td> </td></tr> - <tr><td> </td></tr> - <tr><td class='c009' colspan='2'>PART II.</td></tr> - <tr><td> </td></tr> - <tr><td class='c009' colspan='2'>OF THE INSTRUMENTS NECESSARY.</td></tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Cutting Board</span></td> - <td class='c008'><a href='#Page_24'>24</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Modelling Press</span></td> - <td class='c008'><a href='#Page_25'>25</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><b><span class='large'>T</span></b> <span class='sc'>Square</span></td> - <td class='c008'><a href='#Page_29'>29</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Adjusting Straight Edge</span></td> - <td class='c008'><a href='#Page_31'>31</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Cutting Knives</span></td> - <td class='c008'><a href='#p033'>33</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Adjusting Knife Compass</span></td> - <td class='c008'><a href='#Page_36'>36</a></td> - </tr> - <tr><td> </td></tr> - <tr><td> </td></tr> - <tr><td class='c009' colspan='2'><span class='pageno' id='Page_vi'>vi</span>PART III.</td></tr> - <tr><td> </td></tr> - <tr><td class='c009' colspan='2'>THE COMMENCEMENT AND FINISH OF A MODEL.</td></tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Outline Plan</span></td> - <td class='c008'><a href='#Page_40'>40</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Thickness of Paper for Walls</span></td> - <td class='c008'><a href='#Page_40'>40</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Outlining the Elevation</span></td> - <td class='c008'><a href='#Page_41'>41</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Window Frames</span></td> - <td class='c008'><a href='#Page_44'>44</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Ground Plan, Outline Plan</span></td> - <td class='c008'><a href='#Page_45'>45</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Glass or other backing to Windows</span></td> - <td class='c008'><a href='#Page_48'>48</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Doors</span></td> - <td class='c008'><a href='#Page_49'>49</a>, <a href='#Page_51'>51</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Forming Mitres</span></td> - <td class='c008'><a href='#Page_52'>52</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Incidental pressure during progress</span></td> - <td class='c008'><a href='#Page_54'>54</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Fixing the Model together</span></td> - <td class='c008'><a href='#Page_54'>54</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Blocking pieces to Angles</span></td> - <td class='c008'><a href='#Page_54'>54</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Preparation for final fastening to Stand</span></td> - <td class='c008'><a href='#Page_56'>56</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Method of inserting the Wood Stay</span></td> - <td class='c008'><a href='#Page_57'>57</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>The Cornice</span></td> - <td class='c008'><a href='#Page_59'>59</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Moulding Tools</span></td> - <td class='c008'><a href='#Page_60'>60</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Details of Windows</span></td> - <td class='c008'><a href='#Page_61'>61</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Circular Pediments</span></td> - <td class='c008'><a href='#Page_64'>64</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Quoins</span></td> - <td class='c008'><a href='#Page_64'>64</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Circular Architraves</span></td> - <td class='c008'><a href='#Page_65'>65</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Keystones</span></td> - <td class='c008'><a href='#Page_65'>65</a>, <a href='#Page_66'>66</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='pageno' id='Page_vii'>vii</span><span class='sc'>Cantalivers</span></td> - <td class='c008'><a href='#Page_66'>66</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Cutting, Curves</span></td> - <td class='c008'><a href='#Page_66'>66</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Plain Architraves</span></td> - <td class='c008'><a href='#Page_67'>67</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Cutting in general with the Knife</span></td> - <td class='c008'><a href='#Page_68'>68</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Details of Windows</span></td> - <td class='c008'><a href='#Page_69'>69</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>The Greenhouse</span></td> - <td class='c008'><a href='#Page_73'>73</a>, <a href='#Page_75'>75</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Pilasters</span></td> - <td class='c008'><a href='#Page_75'>75</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Cap and Base</span></td> - <td class='c008'><a href='#Page_75'>75</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Roof of Greenhouse</span></td> - <td class='c008'><a href='#Page_76'>76</a>, <a href='#Page_77'>77</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Cornice and Plinth</span></td> - <td class='c008'><a href='#Page_79'>79</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Chimneys</span></td> - <td class='c008'><a href='#Page_79'>79</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Roof of House</span></td> - <td class='c008'><a href='#Page_83'>83</a>, <a href='#Page_84'>84</a>, <a href='#Page_85'>85</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Removing the Model</span></td> - <td class='c008'><a href='#Page_88'>88</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Preparation of final Stand</span></td> - <td class='c008'><a href='#Page_88'>88</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Preparation of Glass Shade</span></td> - <td class='c008'><a href='#Page_89'>89</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Fixing the Model to its Stand</span></td> - <td class='c008'><a href='#Page_89'>89</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Gothic Architecture, and reference to in Glossary</span></td> - <td class='c008'><a href='#Page_90'>90</a></td> - </tr> - <tr><td> </td></tr> - <tr><td> </td></tr> - <tr><td class='c009' colspan='2'>PART IV.</td></tr> - <tr><td> </td></tr> - <tr><td class='c009' colspan='2'>HINTS ON LANDSCAPE GARDENING.</td></tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Introduction</span></td> - <td class='c008'><a href='#Page_91'>91</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Pedestals, Sun Dials, Gate piers, Balusters</span></td> - <td class='c008'><a href='#Page_93'>93</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Imitations of Lawns, Grass, etc.</span></td> - <td class='c008'><a href='#Page_94'>94</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='pageno' id='Page_viii'>viii</span><span class='sc'>Water, rocks, and Grottoes</span></td> - <td class='c008'><a href='#Page_94'>94</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>Walks, Drives, Flower beds, Trees, and Shrubs</span></td> - <td class='c008'><a href='#Page_95'>95</a></td> - </tr> - <tr><td> </td></tr> - <tr><td> </td></tr> - <tr><td class='c009' colspan='2'>PART V.</td></tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>A Glossary, containing the method of working various details not hitherto described</span></td> - <td class='c008'><a href='#Page_97'>97</a></td> - </tr> - <tr><td> </td></tr> - <tr> - <td class='c007'><span class='sc'>To the Reader. Finis.</span></td> - <td class='c008'><a href='#Page_111'>111</a></td> - </tr> -</table> -<div class='pbb'> - <hr class='pb c003' /> -</div> -<div class='ph1'> - -<div class='nf-center-c1'> -<div class='nf-center c004'> - <div>THE ART</div> - <div class='c003'>OF</div> - <div class='c003'>ARCHITECTURAL MODELLING</div> - <div class='c003'>IN PAPER.</div> - </div> -</div> - -</div> - -<div class='chapter'> - <span class='pageno' id='Page_13'>13</span> - <h2 class='c005'>INTRODUCTION.</h2> -</div> - -<p class='c006'>The art of Architectural Modelling is not so -difficult to acquire, as an observer, examining a -model and admiring the minuteness of its parts, -would be led to suppose. But in order to gain a -certain degree of proficiency, a large amount of -patience and perseverance is absolutely necessary. -The great beauties of a model consist, -<span class='pageno' id='Page_14'>14</span>firstly, in perfect symmetry and correctness of -parts, all the angles being clear, well-defined, -and sharp, the various minutiæ of detail accurately -delineated; and secondly, to the straightness -and evenness of the horizontal and perpendicular -lines. It will be, therefore, readily -understood, that it is these portions of the -manipulation which demand the student’s attention, -more particularly as the joining of the paper -or cardboard by means of a mitre, as well as the -cutting of lines on the slant in either a horizontal -or curved direction, is somewhat difficult. These -difficulties which arise in the student’s path -are, however, easily to be overcome, and he must -not grow faint-hearted if, after repeated trials, he -does not succeed in producing the required -effect. Rather at this juncture let him examine -some model by an adept in the art, comparing -his work with it. By these means he will be -enabled to see the points in his own requiring -<span class='pageno' id='Page_15'>15</span>improvement, and then let him continue to -labour perseveringly and diligently until he gains -a perfect command of his knife and materials, -and few will be found but will admit that the -result at last obtained fully repays him for his -time and labour. There is no doubt that the -art is of very great antiquity, and that in former -times no building of importance was erected -without one having been previously constructed. -This not only aided the successful carrying out -of the architect’s drawings, but enabled him and -his employer to judge better as to the general -effect the work would have when completed.</p> - -<p class='c000'>We have mention made of models as early as -1546, when San Gallo (a pupil of Bramante, the -original architect of St. Peter’s, at Rome), either -himself constructed, or caused to be, a model -of his proposed designs for that magnificent -structure, in order that the whole might be -carried out in the same spirit in the event of -<span class='pageno' id='Page_16'>16</span>his death. On this latter event occurring, the -immortal Michael Angelo Buonarotti undertook -the important office of architect to St. Peter’s. -One of his first tasks was to set aside the model -of his predecessor, which had occupied many -years in constructing, at a cost of many thousand -pounds, while he constructed himself, at a trifling -expense and in a few days, another model of his -intended work. Numerous other instances of -the practical utility of this branch of art might -be cited, but the author deems it unnecessary, -its importance being at once obvious; and this -little work, though devoid of all technicalities, too -frequently the fault of works of this description, -yet is intended shall be eminently practical. To -a large and increasing body, the architectural -assistants, it is hoped that this little hand-book -will prove to be acceptable; and though written -principally for the professional man, it is hoped -it may not prove utterly useless or uninteresting -<span class='pageno' id='Page_17'>17</span>to others, who though not members of the -architectural profession may yet possess sufficient -taste and skill to wish to perpetuate</p> - -<div class='nf-center-c1'> - <div class='nf-center'> - <div>A DESIGN IN PAPER.</div> - </div> -</div> - -<div class='chapter'> - <span class='pageno' id='Page_19'>19</span> - <h2 class='c005'>PART I.<br /> <span class='large'>OF THE MATERIALS REQUIRED.</span></h2> -</div> - -<p class='c006'>The materials the architectural modeller will -require for his work, are, for the most part, -few, simple, and inexpensive. They are also -easily procured at any of the Artists’ Repositories. -It is not, therefore, so much in the -material employed, but in the skill displayed -in the working, that the beauties of a model -consist. The principle in this description of -modelling being, that every possible part be -constructed of paper, it is necessary that this -should be procured of the description best suited -to the nature of the work, and of the best -possible quality. Inferior papers are hard, -<span class='pageno' id='Page_20'>20</span>contain knots and other imperfections, and are -very frequently gritty; this latter imperfection, -by destroying the delicate edge of the knife, -prevents the work having that sharp appearance -so much to be desired. The paper I -use, and have always found the best for all -purposes, has a surface similar to that of -Whatman’s double-elephant drawing paper, and -is, I believe, sold under the name of Crayon -paper: a specimen is bound with this book, -forming the <em>next page</em>; it is of a pale cream-colour, -bearing a strong semblance in tint to -Bath-stone, but I have procured it from this -to the shades necessary for the roofs of models. -It is firm, though not hard, in texture, and not -being too spongy, does not absorb to too great -a degree the paste used in fastening together -the sheets for the various thicknesses required, -thus ensuring their firmness, a matter of the -highest importance, otherwise in thin strips -<span class='pageno' id='Page_21'>21</span>consisting of four, five, or more thicknesses of -paper, upon their being cut each would part -and defeat the desired end.</p> - -<p class='c000'>The most useful tint of this paper is the one -already described, as it can be easily tinted -to represent bricks or rubble, &c., should it be -necessary,—for instance, in a building where the -quoins, dressings, &c., were in stone, the rest -in random rubble or brick, it would enable -you to mark them with a HHH pencil, and -tint before your work was made up. I have -constructed several models in pure white Bristol -board, but it is a tedious hard material to -work in, though the result is very fine.</p> - -<p class='c000'>The next most important auxiliary is an adhesive -material for fastening the sheets together -to produce the necessary thicknesses of cardboard, -and to fix the whole together and the -several parts in their places. For the former -a paste of flour made in the following manner, -<span class='pageno' id='Page_22'>22</span>will be found to be the best. To every two tablespoonfuls -of the best wheaten flour, add a teaspoonful -of common moist or brown sugar, and -a little corrosive sublimate, the whole to be -boiled, and while boiling continually stirred to -prevent lumps, till of the right consistency. -If a few drops of some essential oil, say lavender -or peppermint, be added, the usual mouldiness -will not appear, and the paste will keep for a -great length of time. For the latter, a gum -must be used, prepared by the following proportions. -To each six ounces of the best gum -arabic, add an ounce or less of moist or lump -sugar, one teaspoonful of lavender or other -essential oil, and a table-spoonful of gin, the -whole to be mixed in <em>cold</em> water (no heat -being in any way applied) to the consistency of -a thick syrup.</p> - -<p class='c000'>Other requisites are sheets of mica or talc, to -be procured at the ironmonger’s, and used for -<span class='pageno' id='Page_23'>23</span>windows, skylights, &c.; pieces of soft deal or -beech wood, to form any small detail such as -pinnacles to barge boards, &c., that it may -not be advisable or possible to form in paper; -wire, lead, cord, velvet, and numerous other -nick-nacks, which will occur to the modeller -as his work proceeds, and which will hereafter, -in their place, be carefully described.</p> - -<div class='chapter'> - <span class='pageno' id='Page_24'>24</span> - <h2 class='c005'>PART II.<br /> <span class='large'>OF THE INSTRUMENTS NECESSARY.</span></h2> -</div> - -<p class='c006'>The first thing the artist must procure must -be a board of fine, close-grained wood, free from -knots, to prepare and cut the several parts of -his work upon. The best for this cutting-board -is beech, sycamore, or pear-tree wood; it should -be, at the least, one and a-half inch thick, by -twelve inches broad, and about eighteen inches -in length. I should prefer it even thicker than -stated, as continual planing of the surface to -erase the marks of the knife soon reduces its -thickness. Let it be squared perfectly every -way to allow the T square to work accurately -along its edge. As before stated, care must be -<span class='pageno' id='Page_25'>25</span>taken, when the surface has become too much cut -up, to have it re-planed, or otherwise the knife -is apt to follow the marks in the board, and cut -the paper irregularly upon the under side. The -size of board mentioned will be found most useful -for all ordinary purposes; should the work -be of very large dimensions, of course another -must be procured, proportionally larger. Two or -three boards of close-grained deal will also be -found of service for cutting obliquely, &c., &c.</p> - -<h3 class='c010'>THE MODELLING PRESS.</h3> - -<p class='c011'>This apparatus will be found of essential -service to the artist, as by its aid he forms the -cardboard which is the basis of his model. It -may be either of iron or wood; the former is -lighter, and more elegant in appearance, but the -latter, though plain and homely, is in my opinion -preferable in many respects. A common copying -press may be used, care being taken not to place -<span class='pageno' id='Page_26'>26</span>the damp paper between the iron, but between -two hard, close-grained pieces of wood. On -page <a href='#Page_27'>27</a> is an illustration of the press I use, -which any joiner can construct for a few shillings. -It consists of a cross-beam, <span class='fss'>A</span>, through which -the screw passes; two uprights, <span class='sc'>B B</span>; a bottom, -<span class='fss'>C</span>, to which, and to the cross-beam, the uprights -must be firmly mortised. Between them is a -moveable top-piece, <span class='fss'>D</span>, which by means of cord -running through two small pulleys, <span class='sc'>E E</span>, keeps -it pressing continually against the screw; the -weight <span class='fss'>F</span>, at the end of the cord being slightly -heavier than will balance the top-piece. By -these means, as you unwind the screw, either to -place under, or look at the progress of work -already there, the top-piece moves out of your -way. The sizes of the wood for the different -portions is given, and care must be observed in -not breaking it by too great a pressure of the -screw; as the object of the press is to keep -<span class='pageno' id='Page_27'>27</span>the sheets flatly and firmly together, while the -adhesive material sets, no undue degree of force -is necessary; indeed it will, for reasons hereafter -to be described, be found a disadvantage to press -them too closely.</p> - -<div class='figcenter id001'> -<img src='images/i_p027.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>THE MODELLING PRESS.<br /><br />SIZES.</p> -</div> -</div> - -<table class='table1' summary=''> - <tr> - <td class='c012'><span class='fss'>C</span></td> - <td class='c012'>Bottom piece</td> - <td class='c013'>18</td> - <td class='c013'>inches</td> - <td class='c013'>by</td> - <td class='c014'>12</td> - <td class='c013'>inches</td> - <td class='c013'>by</td> - <td class='c012'>2</td> - <td class='c015'>inches.</td> - </tr> - <tr> - <td class='c012'><span class='sc'>B B</span></td> - <td class='c012'>Uprights</td> - <td class='c013'>12</td> - <td class='c013'>do.</td> - <td class='c013'>—</td> - <td class='c014'>4</td> - <td class='c013'>do.</td> - <td class='c013'>—</td> - <td class='c012'>1½</td> - <td class='c015'>do.</td> - </tr> - <tr> - <td class='c012'><span class='fss'>A</span></td> - <td class='c012'>Cross beam</td> - <td class='c013'>15</td> - <td class='c013'>do.</td> - <td class='c013'>—</td> - <td class='c014'>4</td> - <td class='c013'>do.</td> - <td class='c013'>—</td> - <td class='c012'>2¼</td> - <td class='c015'>do.</td> - </tr> - <tr><td class='c009' colspan='10'>The screw 1⅜ths inch in diameter.</td></tr> -</table> - -<div class='figcenter id001'> -<span class='pageno' id='Page_29'>29</span> -<img src='images/i_p029.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>THE T-SQUARE.</p> -</div> -</div> - -<p class='c000'>This square is formed like the ordinary -drawing-squares, with the exception that the -blade <span class='fss'>A</span> is made of steel; this is firmly screwed to -a stock of hard wood, which has on each side of -the blade a small piece at <span class='sc'>C C</span> cut out; the object of -this is to allow the knife to cut completely to the -edge of the paper. The advantage, in fact, the -<span class='pageno' id='Page_30'>30</span>necessity for a steel blade, will be obvious; were -it of wood, the pressure of the knife along its -edge would indent, or cut it. This square will -be found adapted for every description of large -and small work, but should the cardboard be of -great thickness it is apt to stir, and by so doing -cause irregularity of line. To remedy this an -instrument is used, called an adjusting straight-edge. -<span class='fss'>A</span> is a straight ruler of flat brass, or of -steel, like the blade of the T-square. It is contrived -to move to and from the surface of the -board upon the upright screws, <span class='sc'>B B</span>, while a dovetail -groove is fitted with a piece of brass to run -along it, to allow of the horizontal movement of -the ruler. The paper (upon which the cutting-off -line has been previously marked) is placed upon -the board, the straight-edge adjusted to the -line; the straight-edge being then firmly screwed -down upon it by means of the two small thumb-screws, -3 3, it is rendered immoveable during the -<span class='pageno' id='Page_31'>31</span>progress of the work, this will be better understood -from the annexed engraving.</p> - -<div class='figcenter id001'> -<img src='images/i_p031.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>THE ADJUSTING STRAIGHT-EDGE.</p> -</div> -</div> - -<p class='c000'>No. 1 is a section of the cutting-board, showing -the groove in which the piece of brass runs. -2, The brass, to which is attached the thumb-screws, -by means of a screw through the eye at <span class='fss'>B</span>. -3 3 3, Thumb-screws, to screw down the ruler upon -the paper. The brass rule should not be less -than an eighth of an inch in thickness, otherwise -it may bend; if steel it will do a little less.</p> - -<div id='p033' class='figcenter id003'> -<img src='images/i_p033.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>MODELLING KNIVES.</p> -</div> -</div> - -<p class='c000'>This instrument will be found particularly -useful in cutting the necessary mitres for joining -together the edges of the work, or for any other -<span class='pageno' id='Page_32'>32</span>work of similar description, such as the copings -to walls, mouldings of every description, &c., &c. -Having now described these very important -instruments in a way we hope may prove perfectly -intelligible, we proceed to state the requirements -in those necessary ones, knives. The -number of these the artist will use, is regulated -more by his own fancy than anything else; but -there are three shapes he will find absolutely -necessary. In modelling, as in painting, there are -numerous tricks and contrivances for producing -various effects; and as the painter will often value -a bit of old scrubby, worn-down brush, so the -modeller will find various cutting instruments -materially assist him, such as the broken blade -of a knife, a steel pen, a bradawl, &c., &c., many -of these producing effects that more elaborate -instruments would have failed doing. On page -<a href='#p033'>33</a> will be found an engraving representing three -requisite varieties of knives. No. 1. This knife is -<span class='pageno' id='Page_35'>35</span>long in the blade, and, as will be found in all the -others, is perfectly straight on the cutting edge; -this knife is used to cut straight lines in all -directions through strong work, cutting oblique -lines, mitres, splays, &c. No. 2. One for lighter -work used in forming or modelling ornaments, -or, in general, cutting work of a lighter and neater -character. No. 3. This blade is used solely for -cutting all descriptions of circular work, and -curves of every description. It may be useful to -remark that this is the only shape of blade that -will cut, with clearness and sharpness, curved -lines through thick cardboard. The instrument -next illustrated is called a knife compass, and is -extremely valuable for cutting out circular architraves, -&c., &c., doing its work in a way that the -hand and knife could not equal, and with the -least possible trouble. See illustration, page <a href='#Page_36'>36</a>. -They resemble, in some respects, an ordinary pair -of compasses, but of a little stronger make than -<span class='pageno' id='Page_36'>36</span>the common. <span class='fss'>A</span> is a moveable sweep of brass, -to regulate the opening of the legs of the compasses, -which, being opened to the requisite -width, are firmly held by tightening the thumb-screw, -<span class='fss'>F</span>. <span class='fss'>B</span>, the moveable leg to which the -cutting-knife <span class='fss'>C</span> is attached by means of a shoulder -to the blade at <span class='fss'>G</span>, and a socket at <span class='fss'>H</span>, into which -it fixes, and is secured by the screw at <span class='fss'>D</span>. <span class='fss'>E</span> and -<span class='fss'>I</span> are two screws working on the rod, <span class='fss'>K</span>, on each -side of the moveable bar, <span class='fss'>B</span>.</p> - -<div class='figcenter id002'> -<img src='images/i_p036.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>THE KNIFE COMPASS.</p> -</div> -</div> - -<p class='c000'><span class='pageno' id='Page_37'>37</span>By means of this contrivance the knife is -always kept perfectly upright, and in consequence -cuts perpendicularly through the cardboard. -There may be several knives to fit in -the socket for light and heavy work, but a blade -of the same shape as that shown in the engraving, -will be found sufficient for nearly every purpose. -The instrument might perhaps be more useful if -half as large again as represented. The dotted -lines are given to show the instrument open -wider, in order fully to illustrate the utility of -the moveable leg at <span class='fss'>B</span>. The method of using -this instrument is this: Having a curve to cut, -and having found the centre of the arc, place the -point of the leg <span class='fss'>L</span> within it, then adjusting the -<span class='pageno' id='Page_38'>38</span>moveable leg to the perpendicular by means of -the screws <span class='fss'>I</span> and <span class='fss'>E</span>, stretch the legs to the -requisite radius, and by gradually increasing the -pressure on the blade, the curve may be cut with -the most perfect ease and truth.</p> - -<div class='figcenter id001'> -<img src='images/i_p038.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p><span class='sc'>H L</span> Horizontal line.</p> -</div> -</div> - -<div class='chapter'> - <span class='pageno' id='Page_39'>39</span> - <h2 class='c005'>PART III.<br /> <span class='large'>THE COMMENCEMENT AND FINISH OF A MODEL.</span></h2> -</div> - -<p class='c006'>Assuming that the student has now procured -the various instruments and materials for his -work, and that he has also determined upon the -design he intends in paper, the next thing necessary -is to give him as far as it is possible by a -book copiously illustrated, an exact description -of the method of proceeding. We will therefore -imagine a design which is to be modelled (see -frontispiece), a Villa, in the domestic Italian -style, for example; and taking it to pieces bit by -bit, endeavour to raise it up again in renewed -beauty and effect.</p> - -<p class='c000'>Having the four elevations, together with the -<span class='pageno' id='Page_40'>40</span>ground and roof plans, the latter being essential -to show the position of the chimneys, skylights, -&c., we take a common drawing-board, about the -size of the intended model, and upon it strain as -for a drawing that size, a piece of drawing cartridge, -say an inch and a half wider all round -than the intended model is to be. Upon this, -when dry, draw an <em>outline plan</em> of the intended -building, not putting in any internal walls, for -these will not be required as this is only to form -lines whereon to erect the intended building. -To make it more readily to be understood we -have given a sketch of the outline plan on -page <a href='#Page_45'>45</a>.</p> - -<div class='figcenter id001'> -<span class='pageno' id='Page_41'>41</span> -<img src='images/i_p041a.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>ELEVATIONS OF VILLA.<br /><br />ELEVATION OF ENTRANCE.</p> -</div> -</div> - -<div class='figcenter id001'> -<img src='images/i_p041b.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>SIDE ELEVATION.</p> -</div> -</div> - -<p class='c000'>This being completed, we have now the edifice, -as it were, set out. The next matter for consideration -is the thickness of the walls; that is, -the requisite thickness of paper we shall require. -Suppose we take, as in the plan given, the outside -reveal or recess back of the window frame, -<span class='pageno' id='Page_43'>43</span>at four inches and a half; this would require -four sheets of paper, but as it is always better to -exaggerate slightly in modelling both projections -and recesses, place six or even seven sheets -together; paste them together in twos, putting -them as pasted under the press, and afterwards, -when nearly dry, paste them the full thickness -required and subject them once more to the -action of the press. The most convenient size -of paper to work at for an ordinary-sized model -will be made by doubling a sheet of the paper -as first procured into four. On the paper -becoming perfectly dry, the student must carefully -draw each elevation of the building the full -height from the ground line to the top of the -blocking, being particular that every line both -perpendicular and horizontal is perfectly true -and square, and marking along faintly the lines -for the cornice, strings, &c., &c., that may occur. -This being done and the whole drawn in, of -<span class='pageno' id='Page_44'>44</span>course not drawing in the window frames but -merely the outline of the square of the window, -the side will present the appearance shown in -the accompanying elevation, and which is merely -sketched and not drawn to any scale.</p> - -<div class='figcenter id001'> -<img src='images/i_p044.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p><span class='fss'>A</span> Lines for cornice.      <span class='fss'>B</span> Lines of upper string.      <span class='fss'>C</span> Ditto lower cornice.      <span class='fss'>D</span> Ditto Plinth.</p> -</div> -</div> - -<div class='figcenter id002'> -<span class='pageno' id='Page_45'>45</span> -<img src='images/i_p045.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>PLANS OF VILLA.<br /><br />GROUND PLAN.<br /><br />OUTLINE PLAN.</p> -</div> -</div> - -<p class='c000'>The four or more elevations having been -drawn, proceed to cut out all windows, doors, and -other openings cleanly and accurately. The -windows and their frames must now be made and -gummed at the back of the several openings; -where panels occur paper of the same tint must -be used, sometimes the pieces cut from the -<span class='pageno' id='Page_47'>47</span>windows will form very good backing for such -parts. For the window frames take some large-sized -cream laid paper, and colour it to the tint -you wish your frames to be. Should a representation -of oak be preferred, it may be imitated -successfully thus: First paint your paper yellow, -gamboge and a little burnt sienna will do, and -then prepare a thick colour with Chinese white -and burnt sienna; when the first colour is dry -lay this last-mentioned on, and before <em>it</em> has -time to dry grain it by means of a fine comb; -a small tooth comb will answer best for this -purpose, and if skilfully performed a most -admirable imitation will be the result. Three -or four thicknesses of paper (cream laid or other -white paper) must then be pasted together, with -the oak-coloured one upon the top, and submitted -to the action of the press.</p> - -<p class='c000'>This paper being ready for use, take one of -the pieces cut from the windows, and mark by -<span class='pageno' id='Page_48'>48</span>it the size of the window-opening, then lightly -draw the frames in and cut them out, if the -white paper of the under sheets should show -where cut through sectionally, touch it along -with a little burnt sienna or brown colour. -You must now tint another sheet of the same -description of paper blue or neutral, not in an -even tint, but carelessly and artistically leaving -bright lights; this when pasted as for -the oak-paper two or three thicknesses, will -form the backing to the frames. Then place -the frames face down, on them gummed a sheet -of mica; on that again the blue backing; the -whole then to be put in the press, care being -taken not exhibit too much pressure, otherwise -you will have the backing bulge out. It may, -perhaps, be thought that these thicknesses of -paper for the frames and backing are unnecessary, -and that one might serve as well; but from -experience I can assert, that unless this method -<span class='pageno' id='Page_49'>49</span>be adopted, that flatness the work should have, -will not be obtained. It may also be as well -here to caution the reader against pressing with -too great a degree upon the cardboard when -it is under the action of the press. If too -great a pressure is given, the cardboard will -become so hard as to resist all efforts of the -knife to cut through it. The paper usually -presses to a little less than an inch, to a -scale of one-eighth of an inch to the foot; so -that six thicknesses or sheets of paper will -answer for four and a half of brickwork or -stonework. The doors will be formed first from -two thicknesses<a id='r1' /><a href='#f1' class='c016'><sup>[1]</sup></a> and backed with the same. -This is for plainest description, but if mouldings -are inserted in the panels, adopt the -following:—</p> - -<div class='footnote' id='f1'> -<p class='c000'><span class='label'><a href='#r1'>1</a>. </span>One thickness, two thicknesses, three thicknesses, and so forth, -will be used throughout, to express the number of sheets to be -pasted together.</p> -</div> - -<div class='figcenter id002'> -<img src='images/i_p049a.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>DETAILS No. 1.<br /><br />ELEVATION OF ENTRANCE DOOR.</p> -</div> -</div> - -<div class='figcenter id001'> -<img src='images/i_p049b.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>PLAN OF ENTRANCE DOOR.</p> -</div> -</div> - -<p class='c000'><span class='pageno' id='Page_51'>51</span>First draw the door with the extreme size of -<span class='pageno' id='Page_52'>52</span>the opening of each panel, on a two-thickness -sheet; on another two-thickness sheet, draw the -same panels a size smaller; on a third two-thickness -sheet, draw them a size smaller still; -these being cut out and placed behind one -another, and finally the backing; will admirably -represent mouldings: by producing three separate -lines round the inside of each panel. For work -to ⅛ scale no further trouble will be necessary; -but if larger, the mouldings must be formed -before the door is gummed together, as hereafter -described for the formation of mouldings in -general. The doors, windows, and backs to all -openings are now ready, but cannot be yet fixed -till all the necessary mitreing is completed, which -mitres will be wherever an outside angle occurs -thus, fig. 1. (See page <a href='#Page_53'>53</a>, figs. 1 and 2.)</p> - -<div class='figleft id004'> -<span class='pageno' id='Page_53'>53</span> -<img src='images/i_p053a.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>Fig. 1.<br /><br />OUTSIDE ANGLE.</p> -</div> -</div> - -<div class='figright id005'> -<img src='images/i_p053b.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>Fig. 2.<br /><br />INSIDE ANGLE.</p> -</div> -</div> - -<p class='c000'>In the inner angle (see fig. 2) no mitre is -required; the end of one piece being cut square, -they may be made to overlap one another. Lay -the piece, whatever it may be you wish to mitre, -face down upon the cutting-board; and then at -a distance (equal to the whole thickness of the -cardboard) from the edge draw a line; and at a -short distance back from this line sufficient to -let the point of the knife touch it when held -slanting to the required angle, fix the adjusting -straight-edge previously described; screw firmly -upon it, and cut through the paper at an angle -of 45°, which will, of course, be by cutting from -the line on the top side of the paper, <span class='fss'>A</span>, to the -extreme edge of the underside, <span class='fss'>B</span> (see illustration -page <a href='#Page_55'>55</a>), which represents the side of a building, -and the piece may be seen curling up as cut -from the mitre. Great steadiness of hand, and -<span class='pageno' id='Page_54'>54</span>a few trials on waste cardboard are necessary -before the operator will perform this skilfully. -The straight-edge holding the paper firmly, it -may be cut through at two or three strokes, -observing to hold the knife always at the same -angle. All mitreing work finished, affix the -windows at the back, placing the whole under a -slight pressure.<a id='r2' /><a href='#f2' class='c016'><sup>[2]</sup></a> Then the model must be blocked -up. First cut a number of squares, all sizes, from -waste or other cardboard; let them be perfectly -square; cut these diagonally, and they will form -the blocks to hold the work together at the angles. -Now take any two sides that are to be joined -at the mitred angle, and fix them accurately -together with gum pretty thick, so that it may -<span class='pageno' id='Page_55'>55</span>dry while you hold each side in its place. When -set, lay them down and work the others in a -similar manner. Take now the outline plan, -and having previously numbered the sides to -correspond with the plan, fix them (by touching -slightly their under edge with gum) to it, and -when all are in their places fix, at a distance -apart of an inch and half or so, above one -another the previously described blocking pieces -with gum not so thick in consistency. To make -our meaning perfectly plain, we annex an engraving -of the appearance of an internal angle -when at this stage of the proceedings. A piece -of wood (deal) about ½ inch thick, should now be -<span class='pageno' id='Page_56'>56</span>attached to the model from one side to the other -(see page <a href='#Page_57'>57</a>). This is for the purpose of fastening -the model, when completed, to its stand; it may -be blocked with waste pieces, such as the cuttings -from doors, windows, &c., and gummed firmly. -Pieces or strips of cardboard should also be -gummed along in the inside, at the level of the -intended gutters of the house, to rest the roof -upon. All portions of the work completed, we will -now assume, are fitted together and in their places. -The student will now be able to form some idea -of the general effect his work will have when -finished; but there is yet more—much more—to -be done, and work requiring a still further amount -of skill, practice, and patience.</p> - -<div class='footnote' id='f2'> -<p class='c000'><span class='label'><a href='#r2'>2</a>. </span>As there are many little matters during the progress of a -model requiring a slight pressure, a pressure sufficient to hold the -pieces in their several places till dry, I have found weights answer -very well. I have pieces of square lead from one pound upwards -covered with paper; and by covering, the humble brick may be -usefully pressed into this service.</p> -</div> - -<div class='figcenter id001'> -<img src='images/i_p055.jpg' alt='' class='ig001' /> -</div> - -<div class='figcenter id001'> -<img src='images/i_p056.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>SKETCH SHOWING THE WAY THE BLOCKING PIECES ARE INSERTED IN AN INTERNAL ANGLE.</p> -</div> -</div> - -<div class='figcenter id001'> -<span class='pageno' id='Page_57'>57</span> -<img src='images/i_p057.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>METHOD OF INSERTING THE WOOD STAY.<br /><br /><span class='sc'>A A</span> Cardboard angle stays.      <span class='sc'>B B B B B</span> Wood stay by which the model is affixed to its stand by a screw passing through at <span class='sc'>C C</span>.      <span class='sc'>D E F G</span> Sides of model.</p> -</div> -</div> - -<p class='c000'><span class='pageno' id='Page_59'>59</span>The two principal elevations are given to the -same scale as the plan (page <a href='#Page_41'>41</a>); but in order to -insure our being understood, the principal portions -of the details are given to a larger scale.</p> - -<p class='c000'>The cornice next demands our attention, a -detail of which is given on page <a href='#Page_61'>61</a>, fig. 1, and in -order to model which we proceed thus, the numbers -indicating the various pieces of which it is -composed. No. 2 is a piece worked of the required -thickness demanded by the depth of the -cornice from <span class='fss'>A</span> to <span class='fss'>B</span>, and the necessary projection, -in a sufficient series of lengths to go entirely -round the building. Now, as this is to be cut -through the several thicknesses of paper required, -a method must be found out to hide the different -layers that would consequently be exposed to -<span class='pageno' id='Page_60'>60</span>view; this is by cutting from one or two thicknesses -a piece the whole length of the cornice, -forming a facia, 8, and coming slightly below the -depth of the other under piece to 4; thus, while -at the same time it hides the layers of paper, it -forms the bed of the cornice.</p> - -<p class='c000'>The next members, Nos. 1, 3, 5, and 7, are -formed, first by preparing the size and length on -the square; secondly, by cutting off at any angle -necessary to get as near to the mould as possible; -and, lastly, forming the mould itself.</p> - -<p class='c000'>The manner of moulding being applicable to -every description of either Italian or Gothic -pattern, we proceed to describe it.</p> - -<p class='c000'>Procure from the comb-manufacturers some -pieces of <em>ivory</em> of various sizes, and with different -files, some round, some square, &c., file on one -end of a square piece the <em>reverse</em> of the mould -you require; smooth it well; and for greater -power and convenience, fix it in a handle of wood.</p> - -<div class='figcenter id002'> -<span class='pageno' id='Page_61'>61</span> -<img src='images/i_p061.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p><br />DETAILS No. 2.<br /><br />1 Elevation and section of main cornice.      2 Elevation of window.      2<em>a</em> A detail of section through window.      3 Architrave mould.<a id='t61'></a>      5 Elevation of small window.      5<em>a</em> Section of small window.      6 Elevation of quoins.      7 Section and elevation of tower cornice.</p> -</div> -</div> - -<div class='figcenter id001'> -<span class='pageno' id='Page_63'>63</span> -<img src='images/i_p063.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>MOULDING TOOLS.<br /><br /><span class='fss'>A</span>, Handle with socket to secure the moulding tool (1).      <span class='fss'>B</span>, Thumb-screw.      1, 2, 3, Moulding tools.</p> -</div> -</div> - -<p class='c000'>Nos. 1, 2, 3, &c., &c., will be found generally -available and useful in the formation of all kinds -of mouldings, besides numbers of other shapes -that will occur to the artist. The method of -using the instrument is by indenting the pattern -along the edge of the cardboard, guided by -means of the straight-edge. The sharp arris -left from the file upon the edge of the ivory -mould, had better be slightly taken off, to prevent -the paper being torn in its passage.</p> - -<p class='c000'><span class='pageno' id='Page_64'>64</span>The circular pediment over windows (fig. 2, -page <a href='#Page_61'>61</a>) must be modelled on the flat, and the -moulding returned at the ends. When each -member is finished, they must be gummed up -and bent to the required curve, over a circle -of cardboard or a cylinder of wood, separately. -The panels that occur form thus: Cut as before -directed for doors, the extreme size of the -opening, and at the back place the successive -sizes and thicknesses to form the mouldings, -indented into hollows or worked to rounds, &c., -&c., by means of one or more of the moulding -tools; to be backed last of all.</p> - -<p class='c000'>Commence the preparation of the quoins (fig. 6, -p. <a href='#Page_61'>61</a>) by cutting pieces the required thickness and -width of both long and short quoins, and in long -strips, with the <em>height</em> of each one marked up its -length previously by the dividers.<a id='r3' /><a href='#f3' class='c016'><sup>[3]</sup></a> Cut first the -<span class='pageno' id='Page_65'>65</span>requisite splay at the edge of the quoin, along the -whole length both sides. Cut where marked for -height, and splay top and bottom. They are then -finished, and may be at once fastened to the work.</p> - -<div class='footnote' id='f3'> -<p class='c000'><span class='label'><a href='#r3'>3</a>. </span>The small hair dividers, with the adjusting screw, will be -found extremely useful in modelling work.</p> -</div> - -<div class='figcenter id001'> -<img src='images/i_p065.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>CIRCULAR ARCHITRAVES.<br /><br /><span class='fss'>K</span> Keystone.      <span class='fss'>R</span> Radius.      <span class='sc'>H L</span> Horizontal line.</p> -</div> -</div> - -<p class='c000'>The circular architraves must be formed by -cutting, with the little instrument previously -described as a knife-compass (page <a href='#Page_36'>36</a>), circles of -different diameters and thicknesses of paper -suited to the mould to be represented; gum -together while in the circle, as shown below, the -horizontal divisional line being marked, and the -radiating lines for the insertion of the keystones. -<span class='pageno' id='Page_66'>66</span>When dry cut off by the divisional line, and then -the segments, by the lines at each side of the -keystone. The key must be of paper sufficiently -thick to allow of the highest mould of the -architrave abutting against it, and either left -plain, cut diamond-wise, or carved, or any -other way the fancy may suggest or the design -demand.</p> - -<p class='c000'>The cantalivers in tower (fig. 7, page <a href='#Page_61'>61</a>) and -main cornices (fig. 1, page <a href='#Page_61'>61</a>) to be worked by -preparing paper the required thickness; then -procuring a piece of very thin copper or lead, -mark on it with considerable accuracy the design -of the cantaliver, and cut it out; you will thus -have prepared a mould or templet, which you -can place upon the cardboard, and by running -a hard pencil round it, mark each one precisely -the same in size.</p> - -<p class='c000'>Any portions of the dressings, &c., having -curves in them, had better be cut with knife -<span class='pageno' id='Page_67'>67</span>No. 3<a id='r4' /><a href='#f4' class='c016'><sup>[4]</sup></a>; in fact, this is the only shape of blade -which will leave the edge of a curved line after -cutting, what is technically called “sweet.”</p> - -<div class='footnote' id='f4'> -<p class='c000'><span class='label'><a href='#r4'>4</a>. </span>In using this knife, care must be taken to hold it perfectly -upright, nor lean it either to right or left.</p> -</div> - -<p class='c000'>The positions the cantalivers have to occupy -along the cornice, must be checked along and -regularly divided. Care must also be taken in -gumming them in their places, as one out of -place or leaning would immediately be detected -by a correct eye, and mar completely the effect -of the whole.</p> - -<p class='c000'>The architrave mould (fig. 3, page <a href='#Page_61'>61</a>) next -demands our attention. It will from our -former description be readily understood that -all mouldings are formed by representing in -paper of various thicknesses their several component -parts. Thus, in the mould last named, -we have first the groundwork of or thickness -from <span class='fss'>A</span> to <span class='fss'>B</span>; another thickness, forming the -<span class='pageno' id='Page_68'>68</span>sinking, from <span class='fss'>C</span> to <span class='fss'>D</span>; and finally, the mould, -<span class='fss'>E</span> to <span class='fss'>F</span>. Square first, the required slant next cut -from the edge, and lastly, the slant hollowed by -means of one of the ivory moulding tools. The -keystones and the blocks under the window sills -are cut from paper the thickness required, then -splayed down each way from the centre to the -sides at <em>one</em> cut, and with a sharp knife. This -operation must be performed with some dexterity, -as it is important that the edges should be sharp -and free from woolliness. This effect can only be -obtained by giving one cut or slice in the -direction required: for this purpose use -knife No. 1, which will be found the best for -this description of work. Some modellers use for -this purpose a thin chisel with a keen edge; and -of course all means in art are legitimate that -produce the desired end; but we would recommend -the use of the knife only, wherever possible, -the modeller’s object being to work with as few -<span class='pageno' id='Page_69'>69</span>tools as possible, and to trust much to his knife -alone.</p> - -<div class='figcenter id002'> -<img src='images/i_p069a.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>DETAILS OF WINDOWS. No. 3.<br /><br />MORNING ROOM.</p> -</div> -</div> - -<div class='figcenter id002'> -<img src='images/i_p069b.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>KITCHEN.</p> -</div> -</div> - -<p class='c000'><span class='pageno' id='Page_71'>71</span>We have, in describing the method of working -several important details connected with the -building, and illustrated on page <a href='#Page_61'>61</a>, been, we -fear, somewhat premature, and have not sufficiently -urged upon the student the necessity of -preparing his groundwork for these details in a -perfectly accurate manner. For, as it is well -known, no colouring, however fine, will in a -picture make up for bad and incorrect drawing, -so in a model, walls out of square or windows -and other apertures ill-cut will not present the -wished-for appearance, though all the details be -most skilfully and beautifully modelled. Draw -in all doors, windows, &c., &c., with a very hard -pencil, in order that the lines may be as fine as -possible, and cut them out with knife No. 1, -or No. 2, whichever may be considered most -suitable to the size of opening it is required to -<span class='pageno' id='Page_72'>72</span>cut; the knife No. 3, as before observed, being -used exclusively for curved and circular work. -In cutting out the windows, hold your knife perfectly -upright; and, as you arrive at the end of -the cut, let the <em>edge</em> of the blade be perpendicular, -thus avoiding cutting past the line. In cutting -through thick, or indeed even through one thickness -of paper, do not be too anxious to sever the -piece with one cut, as this way of proceeding is -almost sure to cause unevenness of line. But -commence by <em>drawing</em> a line, as it were, in the -required direction; that the rule may guide it -accurately, press but slightly at first; and as -the track of the knife gets deeper, exert more -pressure. Simple as this direction may appear, -it is nevertheless of the utmost practical utility, -as will readily be found upon trial, as it is only -by these means that the paper will be left at the -edge clean, sharp, and even.</p> - -<div class='figcenter id002'> -<span class='pageno' id='Page_73'>73</span> -<img src='images/i_p073.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>DETAILS OF GREENHOUSE. No. 1.</p> -</div> -</div> - -<p class='c000'>The next object we would call attention to is -<span class='pageno' id='Page_75'>75</span>the Greenhouse, page <a href='#Page_73'>73</a>, and state that there are -two ways of modelling this very general appendage -to a modern mansion. The first and the simplest -method is to form the backing of blue paper behind -the mica. The other, by doing away with -the blue backing, and allowing the mica to remain -transparent. The former method saves some -amount of labour; but the latter being in our -opinion the best and most artistic method, we -shall proceed to describe it: First form the pilasters -(you will require double the number than -for the opaque backing), and cut them in their -length from <span class='fss'>A</span> to <span class='fss'>B</span> (see elevation, page <a href='#Page_73'>73</a>), from -the commencement of the base mouldings to the -underside of those of the cap. The way of -proceeding in modelling cap and base will be -readily understood from the accompanying -sketch, where it will at once be seen better than -we can describe. The best way to cut them is -as if they were a window or opening, cutting the -piece out of the centre at <span class='fss'>A</span>, after having moulded -<span class='pageno' id='Page_76'>76</span>the edge all round. Then dividing them into two -along the line <span class='sc'>D L</span> as below, fix them in their -respective places. The angle ones must be double, -to avoid having to mitre them. A piece of mica -or thin glass cut to the size of the one side is -now taken, and the pilasters and other portions, -divisional bars, &c., are gummed to it, on both -sides; and when with the end it is finished, let -it occupy its intended position on the outline -plan.</p> - -<div class='figcenter id001'> -<img src='images/i_p076.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p><span class='sc'>D L</span> Divisional line.</p> -</div> -</div> - -<p class='c000'>Now proceed to the roof, to be constructed -really of iron and glass, to be modelled of paper -and mica: First, bend round a paper or other -cylinder the piece of mica for the roof, and proceed -to cut a number of strips of cardboard for -the ribs, which may be coloured any suitable tint.</p> - -<div class='figcenter id002'> -<span class='pageno' id='Page_77'>77</span> -<img src='images/i_p077.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>DETAILS OF GREENHOUSE. No. 2.<br /><br />PART ELEVATION.<br />Scale      ¼ inch one foot.</p> -</div> -</div> -<p class='c000'><span class='pageno' id='Page_79'>79</span>These are then to be affixed in their places, as -shown upon the drawing, some in thicker, others -in thinner paper. A ledge of cardboard must be -left at the back of the blocking, and also on the -same level against the side of the house; this -will be for the purpose of resting the roof upon.<a id='r5' /><a href='#f5' class='c016'><sup>[5]</sup></a> -The cornice will be constructed in the manner -described for the others; the pieces on the frieze -<span class='sc'>C, C, C</span> (page <a href='#Page_73'>73</a>) will be placed on the required -thickness for the return, but the return of the -cornice must be cut in it. The plinth must now be -moulded, cut, and fixed; and the whole is complete.</p> - -<div class='footnote' id='f5'> -<p class='c000'><span class='label'><a href='#r5'>5</a>. </span>This description is for a circular roof; that, however, in the -engraving represents a flat hipped roof. The method of proceeding -is the same, except that for the latter no cylinder is required.</p> -</div> - -<p class='c000'>Chimneys, those great ornaments to a house, -at least they should be rendered so, but, alas! -for the taste of some of our modern architects, -are far more frequently the reverse, and what -in able hands and with judicious treatment -would prove a crowning feature and a material -<span class='pageno' id='Page_80'>80</span>assistance to the design, becomes a glaring error -and ruins the whole. So much for the architect: -but should he fortunately possess the ability and -taste to produce those necessaries to our comfort, -with equal credit to himself and benefit to the -design, how often do we see his work marred by -the introduction of Messrs. Somebody’s patent -never-failing revolving smoke preventer; a hideous -monster of some seven feet high, whirling and -screeching upon the slightest appearance of wind. -As our little Handbook has its mission to instruct -in the Art of Modelling an architect’s production, -and as smoke-jacks are but little indebted to him -for their uneasy existence, we beg to apologise -for this digression, and resume our original topic. -Details of the chimneys will be found upon page -<a href='#Page_81'>81</a> and <a href='#Page_83'>83</a>; for the body of the chimney use two -thicknesses, and it will not be found necessary to -mitre the join; for, if even ordinary care be taken, -the union will be scarcely perceptible, while the -<span class='pageno' id='Page_81'>81</span>labour will be considerably diminished. Form -any strings, cornices, &c., &c., that occur, by -cutting the piece flat, and then cutting the square -out of the middle to admit of the shaft, slip it -over the shaft or body of the chimney, till it -arrives at the position required by the design, -where it is at once to be secured in its place. -Perhaps our meaning may be rendered clearer by -the accompanying illustration. <span class='fss'>A</span> represents the -cornice prepared in the manner described, and only -requiring to be fixed in its place. <span class='fss'>B</span>, the shaft -or body of the chimney over which the cornice -is to be slipped till it arrives at the dotted lines; -the chimneys may be fixed to the roof (shortly to -be described) in the following manner: Should -the chimney come on the roof lower down than -the ridge, the bottom of the shaft will have to -be cut to the angle required by the rake of the -roof only; but should the chimney be cut into -by the ridge, then the angle will follow that of -the roof on both sides, diverging from the apex. -For illustration of this we give the annexed -sketches, page <a href='#Page_83'>83</a>.</p> - -<div class='figcenter id002'> -<img src='images/i_p081.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>DETAILS OF CHIMNEYS.</p> -</div> -</div> - -<div class='figcenter id001'> -<span class='pageno' id='Page_83'>83</span> -<img src='images/i_p083.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>DETAILS OF CHIMNEYS.</p> -</div> -</div> - -<p class='c000'><span class='fss'>A</span> represents a chimney, the base of which is -cut simply <em>one way</em>, to suit the slope of the roof. -<span class='fss'>B</span>, a chimney into which the ridge cuts, and the -angle cut both ways from the apex. It will, as -a general rule, be found better to put chimneys -together with thin paper, even in the smallest -models, a squareness being thus produced not to -be obtained otherwise. The base to be formed -out of thickness equal to the projection, and -treated in (as regards fitting it to the roof) a similar -manner to the shaft, so that if the rake of shaft -had chanced not to have been truly cut, there is -no need to throw it away, as it could easily be -blocked under with small pieces till straight, the -base hiding all defects underneath. The method -of working the strings, cornices, &c., has already -<span class='pageno' id='Page_84'>84</span>been fully described in those for the tower and -main building. Figs. 1 and 7, page <a href='#Page_61'>61</a>.</p> - -<p class='c000'>Our model now draws near to its completion. -We had arrived at a stage ready for the roof, -but stopped for the preparation of the chimneys, -in order that when the roof was completed, they -might be at once fixed in their respective places. -The roof may be either scored, or gauged with -paper strips overlapped. The groundwork for -either method will be prepared in the same -manner. First cut, as if for a lid or top to fit -the inside of the model, a strong piece of cardboard; -let it be just so that it will slip into its -place between the walls, but be prevented slipping -down by the strips or ledge on the level of the -gutter, as described for Greenhouse, page <a href='#Page_73'>73</a>.</p> - -<div class='figcenter id001'> -<span class='pageno' id='Page_85'>85</span> -<img src='images/i_p085a.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>DETAILS No. 4.<br /><br />Fig. 1.</p> -</div> -</div> - -<div class='figcenter id001'> -<img src='images/i_p085b.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>Fig. 2.<br /><br />B Bottom piece.      C Cornice.      L Ledge.      S S S Slates.      T Top piece.      W Wall.<br />The cross hatching shows the number of separate pieces the cornice is composed of.</p> -</div> -</div> - -<div class='figcenter id001'> -<img src='images/i_p085c.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>Fig. 3.<br /><br />ROOF PLAN.</p> -</div> -</div> - -<p class='c000'>Sections must now be taken in various parts, -through the roof, to ascertain the length of the -respective sides. Thus if the angle <span class='sc'>A B C</span> (see fig. 1, -page <a href='#Page_85'>85</a>) represents the rake of the roof, the length -<span class='pageno' id='Page_87'>87</span>of the side will be found from <span class='fss'>A</span> to <span class='fss'>B</span> and <span class='fss'>B</span> to <span class='fss'>C</span>. -The sides thus formed must be splayed to fit at -the valleys, apex, &c., and at the base splayed -and fixed to the top piece on which the roof plan -has been drawn, observing to leave space enough -all round for the gutter. If the pieces on which -the sections have been drawn are cut out, they -will answer for internal stays to the roof.</p> - -<p class='c000'>The roof plan is given upon page <a href='#Page_85'>85</a>, fig. 3, -as also an outline section for the finishing of the -roof, fig. 2, page <a href='#Page_85'>85</a>; it will explain itself. The -lead flat will be formed by the bottom piece, -but it must be covered by a paper resembling -in tint that of the lead itself. When the groundwork -of the roof is completed, it must be -covered in imitation of slates by one or other -of the previously-mentioned methods. We will, -however, describe both, leaving the reader to -use his own judgment as to which he may adopt, -our preference being for the strips of overlapping -<span class='pageno' id='Page_88'>88</span>paper. In the simple scoring, proceed to cut out -of the slate tinted paper pieces accurately fitting -to the groundwork of the roof, then with the -knife handle score these sides along, as you -would ink in the roof lines in a drawing, closer -at the ridge, becoming wider at the base, and -parallel to each other. The latter by cutting -layers of paper, gauged decreasing in size as -before directed, fixing them to the groundwork of -the roof beginning at the base, and overlapping -them about <sup><span class='xxsmall'>1</span></sup>⁄<span class='xxsmall'>16</span>th of an inch; after all, submitting -to the press. The roof assumed to be finished, -affix the chimneys, generally make good all -imperfections, &c., and the model is ready for -removal to its final destination; cut therefore -the paper it was built upon from the board, and -also tear from the bottom edges the paper that -may have adhered to it, holding it by the wood -stay.</p> - -<p class='c000'>Prepare a piece of dry wood about two or -<span class='pageno' id='Page_89'>89</span>three inches wider all round than the building -itself, cover it with cloth or velvet, the latter -preferable, the best colour green, and cut a small -groove out of the upper edge; this is to receive the -glass shade, which construct thus: procure five -pieces of glass, the sizes rendered necessary by -your stand to form a square or oblong shade, and -fasten all together by means of strips of thin -paper and gum (the dull gold paper to be procured -in sheets at any of the artists’ repositories -will look best) at their edges. The model must -now be secured to the stand, for which purpose -the piece of wood mentioned at page <a href='#Page_56'>56</a> was -inserted, a hole is drilled through the bottom of -the stand, and a screw passed through it into -the wood stay. Do not screw the model down too -tightly upon the stand, or you may force away the -stay from its fastenings and destroy your work.</p> - -<p class='c000'>We have now described all the necessary materials -and manipulations to complete in every -respect a model similar to the mansion given in -<span class='pageno' id='Page_90'>90</span>the illustrations, and which, though containing -the general detail of a building of that description, -was wanting in numerous varieties of detail -that will occur in many other buildings of the -same class more ornate and considerably more -elaborate in design than our example.</p> - -<p class='c000'>While all our attention is being turned towards -Italian architecture, Gothic must not be forgotten, -and though the general method of procedure -is the same for both, yet there are -numerous things which exist only in the latter -style, and in consequence demand separate -instructions. In order, therefore, that nothing -shall escape being described in the various styles, -that the student may have nothing to retard his -operations, we append the methods of working -the various details in the form of an illustrated -glossary, the alphabetical arrangement of which -will, we think, enable the student more readily -and quickly to find the particular information he -may require.</p> - -<div class='chapter'> - <span class='pageno' id='Page_91'>91</span> - <h2 class='c005'>PART IV.<br /> <span class='large'>HINTS ON LANDSCAPE GARDENING; LAYING OUT GROUNDS, &c.</span></h2> -</div> - -<p class='c006'>We have, as yet, proposed to finish the model -in the plainest and most simple way, completely -unaided and unadorned by the adjuncts of gardens -or trees. And yet, that models are frequently -considerably improved in appearance by these -imitations of natural objects, when taste and skill -go hand in hand, will be admitted by all, but we -often see them completely spoiled by such additions. -It is indeed somewhat difficult to say how -far we may venture with propriety upon this path, -and where to draw the line requires some tact; we -will not, therefore, lay down any rule absolutely as -<span class='pageno' id='Page_92'>92</span>to how far the laying out of grounds and the -modelling of the trees, &c., may be admissible, -only giving some instructions for modelling the -objects themselves. And though the grounds -are laid out, the picturesque undulations of the -surface, the ponds, flower-beds, arcades, terraces, -lawns, shrubs, and trees, faithfully represented, -let it not for one moment be supposed that by -so doing we render what was before a work -of art, a mere toy. Far from it. We do not -wish the reader, when he thinks of a model, to -remember those of York Minster, or Strasbourg -Cathedral, and which, borne aloft upon the -shoulders of some wandering Italian, tempt the -vulgar by the rich colours of the stained glass -inserted in their chalk sides, and brilliantly -illuminated by the light of a farthing candle -placed within; or of the grounds, as bearing -any resemblance to those interesting toys representing -a “<em>castle in cork</em>,” about an inch high, -<span class='pageno' id='Page_93'>93</span>whose clinging ivy is represented by one of the -largest species of moss, and in whose luxurious -gardens bloom roses two inches in diameter, -roses which should have decked some matron’s -cap, but which for the nonce were pressed into this -more noble service. But, to proceed. Balusters -of grotesque, Elizabethan, or other patterns, when -cut out of the solid stone, must be made by -gumming the paper in different thicknesses, till -that required is obtained, carefully drawing the -pattern, and then cutting out with knife No. 3. -Turned work, as circular pedestals for statues, sundials, -gate-piers, balusters, &c., cannot be successfully -imitated in paper, but are better turned in -wood of some light colour, and then tinted with -body colour to the required shade; all work of the -same description that is <em>square</em> may be constructed -in exactly the same manner as before described -for chimney-stacks. For a representation of lawns -and grassy slopes, meadow, &c., we may take -<span class='pageno' id='Page_94'>94</span>white velvet, and tint it to any required shade, -or use cloth which can be obtained any shade of -green, or even flock paper may be procured, -which, when cleverly laid on the work, gives an -excellent imitation of grass; but of all these -methods, velvet tinted will be found the most -effective and best. Water, represent with looking-glass, -or with mica, to the back of which is -gummed paper of suitable tint for the situation -of the water. For rocks, grottoes, &c., take -stout white paper, and thoroughly soak it in -water until it is rendered quite pliable, and then -with the fingers, pieces of wood, or any thing -that may suggest itself as being useful, mould or -model it to the required shapes fancy or skill -may suggest, and afterwards tint it to resemble -nature. An effect better still may be obtained -by gumming it, when perfectly dry, with thick -gum, and then dusting or sprinkling it with fine -sand, which may be procured of various shades. -<span class='pageno' id='Page_95'>95</span>This method adopt also for walks, carriage-drives, -or any place where a representation of -road, or gravel, may be required. Cut out your -flower-beds in thin cork, and then burn the upper -surface; this will give the appearance of rich -mould, or earth, and also serve as a good groundwork -to stick the shrubs and flowers into. In -your trees, rather aim at a general or suggestive -effect, than at much minutiæ of detail; procure -pieces of twigs, and shape them for the trunks -and branches, and then gum on them the smallest-leaved -moss, in good outline to represent nature; -this moss will, when perfectly dried, bear tinting -well. Flower-patches, the same moss with a bit -of bright scarlet, or other paper, here and there -gummed among it.</p> - -<p class='c000'>We have now given sufficient general instructions -to enable the student to proceed with this -branch, should his fancy lead him; and with -these suggestions, and his own practice, he may -<span class='pageno' id='Page_96'>96</span>in a short time be enabled to imitate successfully -the quaint gardens of the Elizabethan period, or -the more natural taste evinced in the landscape -gardening of our own times.</p> - -<div class='lg-container-b c017'> - <div class='linegroup'> - <div class='group'> - <div class='line'>... “Does airy fancy cheat</div> - <div class='line'>My mind well pleased with the deceit?</div> - <div class='line'>I seem to hear, I seem to move,</div> - <div class='line'>And wander through the happy grove,</div> - <div class='line'>Where smooth springs flow, and murmuring breeze</div> - <div class='line'>Wantons through the waving trees.”</div> - </div> - <div class='group'> - <div class='line in34'><span class='sc'>Creech.</span></div> - </div> - </div> -</div> - -<div class='chapter'> - <span class='pageno' id='Page_97'>97</span> - <h2 class='c005'>PART V.<br /> <br /><br /> <span class='large'>A GLOSSARY<br /> <br /> CONTAINING THE METHODS OF WORKING VARIOUS DETAIL, &c., NOT HITHERTO DESCRIBED.</span></h2> -</div> - -<h3 class='c010'>A.</h3> - -<p class='c011'><span class='sc'>Arch.</span>—As a general rule, every description of arch -may be successfully modelled by means of the knife-compass; -each separate moulding that occurs must -consist of separate pieces of paper, the edge of which -has been moulded by one or other of the means -described, and these layers gummed over one another -when finished. To make our meaning clearer, in fig. 1 -next page, a section of a cornice is given, as illustrating -the method to be adopted for arches. It will here be -seen that it is composed of six separate pieces, or, more -properly speaking, thicknesses, for each portion will be -made of the number of thicknesses required by its -<span class='pageno' id='Page_98'>98</span>depth; No. 1, the fillet, square, No. 2, the cyma recta, -first splay, as shown by the dotted line; and then press -with the moulding tool to the required shape, and thus -proceed with all the other members.</p> - -<p class='c000'>This cornice is not drawn to any scale.</p> - -<div class='figcenter id001'> -<img src='images/i_p098.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p><br />Fig. 1.<br /><br />No. 1 Fillet.      No. 2 Cyma recta.      No. 3 Fillet.      No. 4 Casetto.      No. 5 Facia.      No. 6 Continuation of facia.      No. 7 Bed mould.</p> -</div> -</div> - -<p class='c000'>Where deep hollows occur, as in Gothic mouldings, -a different method must be adopted, see fig. 2, the -moulding for a Gothic window jamb; here the deep -hollows are constructed by bending thin paper to the -required curve, and gumming it in the right angles, or -other angles required. <span class='fss'>A</span> and <span class='fss'>B</span> represent the outside -walls of the work, and <span class='sc'>C C C C</span> the various angles required -by the mouldings. As will be seen, the other mouldings -<span class='pageno' id='Page_99'>99</span>are formed on the ends of angle-pieces, in the same -manner as adopted for the cornice.</p> - -<div class='figcenter id001'> -<img src='images/i_p099.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>Fig. 2.</p> -</div> -</div> - -<p class='c000'><span class='sc'>Architrave.</span>—In forming these, the same method -may be adopted as for cornices, cutting the mouldings -separately, and laying them one over the other in the -order in which they come. Circular architraves are -easily and beautifully cut with the knife-compass.</p> - -<p class='c000'><span class='sc'>Acanthus.</span>—The method of modelling the leaves -of this plant, so much used in ornamentation, will -be afterwards described under the general head of -ornaments.</p> - -<p class='c000'><span class='sc'>Ashlar.</span>—In representing work of two kinds, -namely, quoins of dressed work, and filling in of random -tooled ashlar:—Draw the quoins in with a <span class='sc'>H H H</span> -pencil, score in the ashlar, and tint as may be desired.</p> - -<div class='figcenter id001'> -<span class='pageno' id='Page_100'>100</span> -<img src='images/i_p100a.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>RANDOM ASHLAR.</p> -</div> -</div> - -<p class='c000'><span class='sc'>Astragal.</span>—First cut your paper square, -thus—<img src='images/i_p100b.jpg' alt='' class='texth' /> -next bevel the edge thus -<img src='images/i_p100c.jpg' alt='' class='texth' /> -and then, -with one of the hollow ivory moulding tools run along -the edge by pressure, give the intended round.</p> - -<p class='c000'><span class='sc'>Acroteria.</span>—May be modelled in exactly the same -manner as previously described for chimney shafts (see -page <a href='#Page_80'>80</a>, <i><span lang="la" xml:lang="la">ante</span></i>).</p> - -<h3 class='c010'>B.</h3> - -<p class='c011'><span class='sc'>Barge Board.</span>—First determine on the thickness -your board is to be, and then let the paper for it be -pressed closer together than that used for ordinary -work; carefully draw the pattern, and cut out with -knife No. 3, splaying the tracery with knives Nos. 1 -and 2, and smoothing with an ivory or agate burnisher.</p> - -<div class='figcenter id001'> -<span class='pageno' id='Page_101'>101</span> -<img src='images/i_p101a.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>BARGE BOARD.</p> -</div> -</div> - -<p class='c000'><span class='sc'>Buttress.</span>—If they are to a large scale, say quarter-inch, -one foot, they are -best boxed out; the angles -carefully and accurately -mitred. Less -scale, they may be boxed -out of double thickness, -as described for chimney -shafts; or, if very small -size, they may be cut -from the solid.</p> - -<div class='figleft id006'> -<img src='images/i_p101b.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>SIDE VIEW.</p> -</div> -</div> - -<div class='figright id007'> -<img src='images/i_p101c.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p>FRONT VIEW.</p> -</div> -</div> - -<p class='c000'><span class='sc'>Balustrade.</span>—Model the capping as described for -<span class='pageno' id='Page_102'>102</span>cornices, with the exception, this will be worked upon -both faces.</p> - -<p class='c000'><span class='sc'>Blocking.</span>—To a cornice. This, if large, is best -constructed by being boxed out. If small in size, cut -them out of the solid.</p> - -<p class='c000'><span class='sc'>Bracket.</span>—Brackets in Gothic work are to be constructed -in layers, in a similar manner as described for -cornices; other brackets may be cut from the solid -paper, first by making a pattern, or template, in thin -tea lead, or sheet copper, and marking round the edge -upon the paper, uniformity of size being thus ensured.</p> - -<h3 class='c010'>C.</h3> - -<p class='c011'><span class='sc'>Cornices.</span>—The construction of cornices is fully -described in that of the House, illustrated, and also -under the head of Arch, where a cornice is described -as illustrating the formation of moulded arches.</p> - -<p class='c000'><span class='sc'>Coins</span>, or <span class='sc'>Quoins</span>; see those described for House, -page <a href='#Page_64'>64</a>, <i><span lang="la" xml:lang="la">ante</span></i>; also Ashlar-work.</p> - -<p class='c000'><span class='sc'>Coping.</span>—If the coping be small scale, cut from the -solid by the adjusting straight-edge; otherwise they -are better boxed out.</p> - -<p class='c000'><span class='sc'>Cresting.</span>—Proceed in much the same manner as -<span class='pageno' id='Page_103'>103</span>described for barge boards; use a template to save -trouble in pencilling out, and cut with knife No. 3; -three thicknesses are ample for eighth scale work.</p> - -<p class='c000'><span class='sc'>Cusps.</span>—See description of Tracery; window-cusps -being circular work, No. 3 knife must be used.</p> - -<p class='c000'><span class='sc'>Corbel.</span>—Refer to Cantilevers in House Tower -Cornice, the method of modelling being the same, -except such as are composed of a series of horizontal -mouldings, in which case proceed as for cornices.</p> - -<p class='c000'><span class='sc'>Console.</span>—The console given for example is composed -vertically of five separate pieces; horizontally of -two, each separate part receiving its proper form, and -when completed, gummed together.</p> - -<div class='figcenter id001'> -<img src='images/i_p103.jpg' alt='' class='ig001' /> -</div> - -<p class='c000'><span class='sc'>Capital, Corinthian.</span>—We choose for illustrating -the method adopted for modelling capitals, a Corinthian -one, as most useful for our purpose. The example -given is from the Temple of Vesta, at Tivoli, a beautiful -<span class='pageno' id='Page_104'>104</span>and peculiar example, to model which proceed thus</p> - -<div class='figcenter id001'> -<img src='images/i_p104.jpg' alt='' class='ig001' /> -<div class='ic001'> -<p><span class='sc'>A A A</span> Flowers in the abacus.      1 2 3 Abacus.      <span class='sc'>B B</span> Volutes.      <span class='sc'>C C</span> Caulicoles.      <span class='fss'>C</span>* Bell.      1 2 3 Astragal.      <span class='sc'>D D D</span> Flutes.</p> -</div> -</div> - -<p class='c000'>Compose the abacus of three layers, 1, ovolo, 2, fillet, -3, cyma; then the bell of the capital must be turned -out of some close-grained wood, and attached to the -astragal, composed of three pieces, 1, fillet, 2, astragal, -3, fillet. The leaves are then to be modelled, as -described under the head of ornaments, also the flower -in the abacus; the volutes and caulicoles in a similar -manner to that described for consoles. When all are -prepared, they must be fixed most accurately in their -places. The bell of the capital must be tinted previously, -to resemble in colour the rest of the work.</p> - -<div class='figright id008'> -<span class='pageno' id='Page_105'>105</span> -<img src='images/i_p105.jpg' alt='' class='ig001' /> -</div> - -<p class='c000'><span class='sc'>Column, Circular.</span>—This description of columns -must be formed out of very thin paper, rolled as close -as possible to the required lengths and diameters, -thinning the paper at the extreme edge with a very -sharp knife to conceal the join. If the columns are -too small to be cleverly rolled, they may be turned as -described for balusters; should the columns (as in -classic work,) diminish, then procure a wood core to -roll the paper round, and when the paper is gummed -and dry, withdraw the core. It will now be obvious -that combinations of various descriptions occurring -so frequently in Gothic work, may easily be -represented as this column in plan, being -nothing more than four rolls joined together. -If the columns are too small for paper, turn shafts, bases, -and caps at once; by this means much unnecessary -trouble will be saved, and a superior effect produced.</p> - -<h3 class='c010'>D.</h3> - -<p class='c011'><span class='sc'>Dentils.</span>—Model dentils in the same manner as -previously described for brackets, cantilevers, &c.</p> - -<p class='c000'><span class='sc'>Dome.</span>—Whatever the shape of the dome you wish -to model may be, a pattern on which to form it had -<span class='pageno' id='Page_106'>106</span>best be turned in wood; this forms a basis upon -which the paper casing may remain until dry, and then -the mould may be removed. It has not been thought -necessary within the limits of this work to include -the development of the various shapes of domes and -cupolas, the student being deemed master of this -branch of science. If, however, he should not be, any -work on practical geometry will supply his wants.</p> - -<p class='c000'><span class='sc'>Doors.</span>—A copious description of the manner of -modelling doors is given in those described for the -House, page <a href='#Page_51'>51</a>, <i><span lang="la" xml:lang="la">ante</span></i>.</p> - -<h3 class='c010'>F.</h3> - -<p class='c011'><span class='sc'>Flutes.</span>—In order to flute a column, we proceed -thus: first roll the column up as before described, -taking care to have it smaller than if plain, to allow the -fluted piece to make up the required diameter; then -prepare a piece of paper (one thickness will do), cut it -of sufficient size to go once round the column, and -join exactly; upon this piece carefully space or mark -out the divisions of the flutings. Now procure a piece -of soft straight-grained <em>deal</em>, perfectly free from knots, -and with some blunt, round-headed instrument (one -of the modelling tools, or a piece of ivory filed smooth,) -<span class='pageno' id='Page_107'>107</span>indent the wood with a groove the exact length of the -required flute, upon which (the paper having been -previously <em>damped</em> only), press it into the wood groove -all along the flute with the same tool the groove was -made with, and so proceed with each in succession, -gumming them to the column when dry.</p> - -<h3 class='c010'>H.</h3> - -<p class='c011'><span class='sc'>Hollows.</span>—In forming hollows in mouldings, &c., -if large, proceed as described under the head of Arch; -if small, first cut by means of the “adjusting straight-edge,” -an angle, thus, <b><span class='large'>V</span></b>; and then with a curved -ivory tool give it the required concavity by pressure -along the whole length of the previously cut angle.</p> - -<p class='c000'><span class='sc'>Hood Mould.</span>—These may be cut with the -“knife-compass,” and the mouldings worked by fitting -a piece of ivory filed to the required form in lieu of the -knife; they must be slightly gummed upon the underside -to the cutting-board, to keep them steady while -being worked.</p> - -<h3 class='c010'>I.</h3> - -<p class='c011'><span class='sc'>Ironwork.</span>—May be represented in either paper, -tea-lead, thin sheet copper, or wire, depending on size -<span class='pageno' id='Page_108'>108</span>and form; perhaps the easiest and best material for -general purposes is tea-lead, <i><span lang="la" xml:lang="la">i. e.</span></i>, the lead with which -the tea chests are lined.</p> - -<h3 class='c010'>O.</h3> - -<p class='c011'><span class='sc'>Ornaments.</span>—Under this head is included every -description of foliage, leaves, &c. All the leaves, &c., -must be carefully drawn and cut out, and then indented -on either side, as concavity or convexity is desired, in -a similar manner to the operation of fluting a column, -with the different <em>ivory</em> modelling tools on a piece of -soft yielding deal. Bosses, crocketts, finials, festoons, -wreaths, in short every description of foliage, and even -sculpture in bas-relief, may be beautifully modelled by -these simple means.</p> - -<h3 class='c010'>T.</h3> - -<p class='c011'><span class='sc'>Tracery Window.</span>—The general method of modelling -windows of this description is very simple, but -the practice difficult. First, paper upon which you -intend to cut out any tracery, must be <em>pressed</em> closer -together than that used for ordinary work, so as to -afford more assistance to the knife when cutting on -<span class='pageno' id='Page_109'>109</span>the splay. Having drawn the design of your window, -proceed to cut out all the interstices with knife No. 3; -then splay down from the nosing with knives Nos. 1 -and 2, as each may be found useful, cutting through -with one stroke, or rather with a succession of short -strokes right through on the slant, boldly and without -leaving a jagged edge; afterwards smooth your work -with ivory or agate. You had better place the pieces -that came from between the mullions while cutting -the splay, in their places again between the mullions, -to offer resistance to the knife and prevent them -bending. The eyes may be successfully formed by -packing-needles of diamond shape, fixed in a handle.</p> - -<div class='nf-center-c1'> -<div class='nf-center c002'> - <div>END OF THE GLOSSARY.</div> - </div> -</div> - -<div class='chapter'> - <span class='pageno' id='Page_111'>111</span> - <h2 class='c005'>TO THE READER.</h2> -</div> - -<p class='c006'>It will have afforded the Author sincere gratification -if the contents of this little work have -found favour in the eyes of the Reader, and have -been a ready help to him in his efforts in Architectural -Modelling. Next to the pleasure of -learning, is that of imparting knowledge. The -Author has endeavoured, to the best of his ability, -to render all his instructions clear and practical, -at the same time divesting them of all unnecessary -technicalities, and rendering them as terse as -possible.</p> - -<div class='nf-center-c1'> -<div class='nf-center c002'> - <div>FINIS.</div> - </div> -</div> - -<div class='nf-center-c1'> -<div class='nf-center c004'> - <div><span class='pageno' id='Page_112'>112</span>LONDON:</div> - <div>BRADBURY AND EVANS, PRINTERS, WHITEFRIARS.</div> - </div> -</div> - -<div class='pbb'> - <hr class='pb c003' /> -</div> -<div class='tnotes'> - -<div class='chapter'> - <h2 class='c005'>TRANSCRIBER’S NOTES</h2> -</div> - <ol class='ol_1 c002'> - <li>Item number 4 was not included in the caption on p. <a href='#t61'>61</a>. - - </li> - <li>Silently corrected typographical errors. - - </li> - <li>Retained anachronistic and non-standard spellings as printed. - </li> - </ol> - -</div> - - - - - - - - -<pre> - - - - - -End of the Project Gutenberg EBook of The Art of Architectural Modelling in -Paper, by T. A. Richardson - -*** END OF THIS PROJECT GUTENBERG EBOOK ARCHITECTURAL MODELLING IN PAPER *** - -***** This file should be named 54340-h.htm or 54340-h.zip ***** -This and all associated files of various formats will be found in: - http://www.gutenberg.org/5/4/3/4/54340/ - -Produced by Richard Tonsing, deaurider and the Online -Distributed Proofreading Team at http://www.pgdp.net (This -file was produced from images generously made available -by The Internet Archive) - - -Updated editions will replace the previous one--the old editions -will be renamed. - -Creating the works from public domain print editions means that no -one owns a United States copyright in these works, so the Foundation -(and you!) can copy and distribute it in the United States without -permission and without paying copyright royalties. Special rules, -set forth in the General Terms of Use part of this license, apply to -copying and distributing Project Gutenberg-tm electronic works to -protect the PROJECT GUTENBERG-tm concept and trademark. Project -Gutenberg is a registered trademark, and may not be used if you -charge for the eBooks, unless you receive specific permission. If you -do not charge anything for copies of this eBook, complying with the -rules is very easy. You may use this eBook for nearly any purpose -such as creation of derivative works, reports, performances and -research. They may be modified and printed and given away--you may do -practically ANYTHING with public domain eBooks. Redistribution is -subject to the trademark license, especially commercial -redistribution. - - - -*** START: FULL LICENSE *** - -THE FULL PROJECT GUTENBERG LICENSE -PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK - -To protect the Project Gutenberg-tm mission of promoting the free -distribution of electronic works, by using or distributing this work -(or any other work associated in any way with the phrase "Project -Gutenberg"), you agree to comply with all the terms of the Full Project -Gutenberg-tm License (available with this file or online at -http://gutenberg.org/license). - - -Section 1. General Terms of Use and Redistributing Project Gutenberg-tm -electronic works - -1.A. By reading or using any part of this Project Gutenberg-tm -electronic work, you indicate that you have read, understand, agree to -and accept all the terms of this license and intellectual property -(trademark/copyright) agreement. If you do not agree to abide by all -the terms of this agreement, you must cease using and return or destroy -all copies of Project Gutenberg-tm electronic works in your possession. -If you paid a fee for obtaining a copy of or access to a Project -Gutenberg-tm electronic work and you do not agree to be bound by the -terms of this agreement, you may obtain a refund from the person or -entity to whom you paid the fee as set forth in paragraph 1.E.8. - -1.B. "Project Gutenberg" is a registered trademark. It may only be -used on or associated in any way with an electronic work by people who -agree to be bound by the terms of this agreement. There are a few -things that you can do with most Project Gutenberg-tm electronic works -even without complying with the full terms of this agreement. See -paragraph 1.C below. There are a lot of things you can do with Project -Gutenberg-tm electronic works if you follow the terms of this agreement -and help preserve free future access to Project Gutenberg-tm electronic -works. See paragraph 1.E below. - -1.C. The Project Gutenberg Literary Archive Foundation ("the Foundation" -or PGLAF), owns a compilation copyright in the collection of Project -Gutenberg-tm electronic works. Nearly all the individual works in the -collection are in the public domain in the United States. If an -individual work is in the public domain in the United States and you are -located in the United States, we do not claim a right to prevent you from -copying, distributing, performing, displaying or creating derivative -works based on the work as long as all references to Project Gutenberg -are removed. Of course, we hope that you will support the Project -Gutenberg-tm mission of promoting free access to electronic works by -freely sharing Project Gutenberg-tm works in compliance with the terms of -this agreement for keeping the Project Gutenberg-tm name associated with -the work. You can easily comply with the terms of this agreement by -keeping this work in the same format with its attached full Project -Gutenberg-tm License when you share it without charge with others. - -1.D. The copyright laws of the place where you are located also govern -what you can do with this work. Copyright laws in most countries are in -a constant state of change. If you are outside the United States, check -the laws of your country in addition to the terms of this agreement -before downloading, copying, displaying, performing, distributing or -creating derivative works based on this work or any other Project -Gutenberg-tm work. The Foundation makes no representations concerning -the copyright status of any work in any country outside the United -States. - -1.E. Unless you have removed all references to Project Gutenberg: - -1.E.1. The following sentence, with active links to, or other immediate -access to, the full Project Gutenberg-tm License must appear prominently -whenever any copy of a Project Gutenberg-tm work (any work on which the -phrase "Project Gutenberg" appears, or with which the phrase "Project -Gutenberg" is associated) is accessed, displayed, performed, viewed, -copied or distributed: - -This eBook is for the use of anyone anywhere at no cost and with -almost no restrictions whatsoever. You may copy it, give it away or -re-use it under the terms of the Project Gutenberg License included -with this eBook or online at www.gutenberg.org/license - -1.E.2. If an individual Project Gutenberg-tm electronic work is derived -from the public domain (does not contain a notice indicating that it is -posted with permission of the copyright holder), the work can be copied -and distributed to anyone in the United States without paying any fees -or charges. If you are redistributing or providing access to a work -with the phrase "Project Gutenberg" associated with or appearing on the -work, you must comply either with the requirements of paragraphs 1.E.1 -through 1.E.7 or obtain permission for the use of the work and the -Project Gutenberg-tm trademark as set forth in paragraphs 1.E.8 or -1.E.9. - -1.E.3. If an individual Project Gutenberg-tm electronic work is posted -with the permission of the copyright holder, your use and distribution -must comply with both paragraphs 1.E.1 through 1.E.7 and any additional -terms imposed by the copyright holder. Additional terms will be linked -to the Project Gutenberg-tm License for all works posted with the -permission of the copyright holder found at the beginning of this work. - -1.E.4. Do not unlink or detach or remove the full Project Gutenberg-tm -License terms from this work, or any files containing a part of this -work or any other work associated with Project Gutenberg-tm. - -1.E.5. Do not copy, display, perform, distribute or redistribute this -electronic work, or any part of this electronic work, without -prominently displaying the sentence set forth in paragraph 1.E.1 with -active links or immediate access to the full terms of the Project -Gutenberg-tm License. - -1.E.6. You may convert to and distribute this work in any binary, -compressed, marked up, nonproprietary or proprietary form, including any -word processing or hypertext form. However, if you provide access to or -distribute copies of a Project Gutenberg-tm work in a format other than -"Plain Vanilla ASCII" or other format used in the official version -posted on the official Project Gutenberg-tm web site (www.gutenberg.org), -you must, at no additional cost, fee or expense to the user, provide a -copy, a means of exporting a copy, or a means of obtaining a copy upon -request, of the work in its original "Plain Vanilla ASCII" or other -form. Any alternate format must include the full Project Gutenberg-tm -License as specified in paragraph 1.E.1. - -1.E.7. Do not charge a fee for access to, viewing, displaying, -performing, copying or distributing any Project Gutenberg-tm works -unless you comply with paragraph 1.E.8 or 1.E.9. - -1.E.8. You may charge a reasonable fee for copies of or providing -access to or distributing Project Gutenberg-tm electronic works provided -that - -- You pay a royalty fee of 20% of the gross profits you derive from - the use of Project Gutenberg-tm works calculated using the method - you already use to calculate your applicable taxes. The fee is - owed to the owner of the Project Gutenberg-tm trademark, but he - has agreed to donate royalties under this paragraph to the - Project Gutenberg Literary Archive Foundation. Royalty payments - must be paid within 60 days following each date on which you - prepare (or are legally required to prepare) your periodic tax - returns. Royalty payments should be clearly marked as such and - sent to the Project Gutenberg Literary Archive Foundation at the - address specified in Section 4, "Information about donations to - the Project Gutenberg Literary Archive Foundation." - -- You provide a full refund of any money paid by a user who notifies - you in writing (or by e-mail) within 30 days of receipt that s/he - does not agree to the terms of the full Project Gutenberg-tm - License. You must require such a user to return or - destroy all copies of the works possessed in a physical medium - and discontinue all use of and all access to other copies of - Project Gutenberg-tm works. - -- You provide, in accordance with paragraph 1.F.3, a full refund of any - money paid for a work or a replacement copy, if a defect in the - electronic work is discovered and reported to you within 90 days - of receipt of the work. - -- You comply with all other terms of this agreement for free - distribution of Project Gutenberg-tm works. - -1.E.9. If you wish to charge a fee or distribute a Project Gutenberg-tm -electronic work or group of works on different terms than are set -forth in this agreement, you must obtain permission in writing from -both the Project Gutenberg Literary Archive Foundation and Michael -Hart, the owner of the Project Gutenberg-tm trademark. Contact the -Foundation as set forth in Section 3 below. - -1.F. - -1.F.1. Project Gutenberg volunteers and employees expend considerable -effort to identify, do copyright research on, transcribe and proofread -public domain works in creating the Project Gutenberg-tm -collection. Despite these efforts, Project Gutenberg-tm electronic -works, and the medium on which they may be stored, may contain -"Defects," such as, but not limited to, incomplete, inaccurate or -corrupt data, transcription errors, a copyright or other intellectual -property infringement, a defective or damaged disk or other medium, a -computer virus, or computer codes that damage or cannot be read by -your equipment. - -1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the "Right -of Replacement or Refund" described in paragraph 1.F.3, the Project -Gutenberg Literary Archive Foundation, the owner of the Project -Gutenberg-tm trademark, and any other party distributing a Project -Gutenberg-tm electronic work under this agreement, disclaim all -liability to you for damages, costs and expenses, including legal -fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT -LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE -PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE -TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE -LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR -INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH -DAMAGE. - -1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a -defect in this electronic work within 90 days of receiving it, you can -receive a refund of the money (if any) you paid for it by sending a -written explanation to the person you received the work from. If you -received the work on a physical medium, you must return the medium with -your written explanation. The person or entity that provided you with -the defective work may elect to provide a replacement copy in lieu of a -refund. If you received the work electronically, the person or entity -providing it to you may choose to give you a second opportunity to -receive the work electronically in lieu of a refund. If the second copy -is also defective, you may demand a refund in writing without further -opportunities to fix the problem. - -1.F.4. Except for the limited right of replacement or refund set forth -in paragraph 1.F.3, this work is provided to you 'AS-IS' WITH NO OTHER -WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE. - -1.F.5. Some states do not allow disclaimers of certain implied -warranties or the exclusion or limitation of certain types of damages. -If any disclaimer or limitation set forth in this agreement violates the -law of the state applicable to this agreement, the agreement shall be -interpreted to make the maximum disclaimer or limitation permitted by -the applicable state law. The invalidity or unenforceability of any -provision of this agreement shall not void the remaining provisions. - -1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the -trademark owner, any agent or employee of the Foundation, anyone -providing copies of Project Gutenberg-tm electronic works in accordance -with this agreement, and any volunteers associated with the production, -promotion and distribution of Project Gutenberg-tm electronic works, -harmless from all liability, costs and expenses, including legal fees, -that arise directly or indirectly from any of the following which you do -or cause to occur: (a) distribution of this or any Project Gutenberg-tm -work, (b) alteration, modification, or additions or deletions to any -Project Gutenberg-tm work, and (c) any Defect you cause. - - -Section 2. Information about the Mission of Project Gutenberg-tm - -Project Gutenberg-tm is synonymous with the free distribution of -electronic works in formats readable by the widest variety of computers -including obsolete, old, middle-aged and new computers. It exists -because of the efforts of hundreds of volunteers and donations from -people in all walks of life. - -Volunteers and financial support to provide volunteers with the -assistance they need, are critical to reaching Project Gutenberg-tm's -goals and ensuring that the Project Gutenberg-tm collection will -remain freely available for generations to come. In 2001, the Project -Gutenberg Literary Archive Foundation was created to provide a secure -and permanent future for Project Gutenberg-tm and future generations. -To learn more about the Project Gutenberg Literary Archive Foundation -and how your efforts and donations can help, see Sections 3 and 4 -and the Foundation web page at http://www.pglaf.org. - - -Section 3. Information about the Project Gutenberg Literary Archive -Foundation - -The Project Gutenberg Literary Archive Foundation is a non profit -501(c)(3) educational corporation organized under the laws of the -state of Mississippi and granted tax exempt status by the Internal -Revenue Service. The Foundation's EIN or federal tax identification -number is 64-6221541. Its 501(c)(3) letter is posted at -http://pglaf.org/fundraising. Contributions to the Project Gutenberg -Literary Archive Foundation are tax deductible to the full extent -permitted by U.S. federal laws and your state's laws. - -The Foundation's principal office is located at 4557 Melan Dr. S. -Fairbanks, AK, 99712., but its volunteers and employees are scattered -throughout numerous locations. Its business office is located at -809 North 1500 West, Salt Lake City, UT 84116, (801) 596-1887, email -business@pglaf.org. Email contact links and up to date contact -information can be found at the Foundation's web site and official -page at http://pglaf.org - -For additional contact information: - Dr. Gregory B. Newby - Chief Executive and Director - gbnewby@pglaf.org - - -Section 4. Information about Donations to the Project Gutenberg -Literary Archive Foundation - -Project Gutenberg-tm depends upon and cannot survive without wide -spread public support and donations to carry out its mission of -increasing the number of public domain and licensed works that can be -freely distributed in machine readable form accessible by the widest -array of equipment including outdated equipment. Many small donations -($1 to $5,000) are particularly important to maintaining tax exempt -status with the IRS. - -The Foundation is committed to complying with the laws regulating -charities and charitable donations in all 50 states of the United -States. Compliance requirements are not uniform and it takes a -considerable effort, much paperwork and many fees to meet and keep up -with these requirements. We do not solicit donations in locations -where we have not received written confirmation of compliance. To -SEND DONATIONS or determine the status of compliance for any -particular state visit http://pglaf.org - -While we cannot and do not solicit contributions from states where we -have not met the solicitation requirements, we know of no prohibition -against accepting unsolicited donations from donors in such states who -approach us with offers to donate. - -International donations are gratefully accepted, but we cannot make -any statements concerning tax treatment of donations received from -outside the United States. U.S. laws alone swamp our small staff. - -Please check the Project Gutenberg Web pages for current donation -methods and addresses. Donations are accepted in a number of other -ways including checks, online payments and credit card donations. -To donate, please visit: http://pglaf.org/donate - - -Section 5. General Information About Project Gutenberg-tm electronic -works. - -Professor Michael S. Hart is the originator of the Project Gutenberg-tm -concept of a library of electronic works that could be freely shared -with anyone. For thirty years, he produced and distributed Project -Gutenberg-tm eBooks with only a loose network of volunteer support. - - -Project Gutenberg-tm eBooks are often created from several printed -editions, all of which are confirmed as Public Domain in the U.S. -unless a copyright notice is included. Thus, we do not necessarily -keep eBooks in compliance with any particular paper edition. - - -Most people start at our Web site which has the main PG search facility: - - http://www.gutenberg.org - -This Web site includes information about Project Gutenberg-tm, -including how to make donations to the Project Gutenberg Literary -Archive Foundation, how to help produce our new eBooks, and how to -subscribe to our email newsletter to hear about new eBooks. - - -</pre> - - </body> - <!-- created with ppgen.py 3.56m on 2017-03-11 06:46:52 GMT --> -</html> diff --git a/old/54340-h/images/cover.jpg b/old/54340-h/images/cover.jpg Binary files differdeleted file mode 100644 index 30c300c..0000000 --- a/old/54340-h/images/cover.jpg +++ /dev/null diff --git a/old/54340-h/images/i_frontispiece.jpg b/old/54340-h/images/i_frontispiece.jpg Binary files differdeleted file mode 100644 index 19b14f2..0000000 --- a/old/54340-h/images/i_frontispiece.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p027.jpg b/old/54340-h/images/i_p027.jpg Binary files differdeleted file mode 100644 index 5789093..0000000 --- a/old/54340-h/images/i_p027.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p029.jpg b/old/54340-h/images/i_p029.jpg Binary files differdeleted file mode 100644 index 7bc2922..0000000 --- a/old/54340-h/images/i_p029.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p031.jpg b/old/54340-h/images/i_p031.jpg Binary files differdeleted file mode 100644 index 3cd7d1e..0000000 --- a/old/54340-h/images/i_p031.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p033.jpg b/old/54340-h/images/i_p033.jpg Binary files differdeleted file mode 100644 index 25e09ff..0000000 --- a/old/54340-h/images/i_p033.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p036.jpg b/old/54340-h/images/i_p036.jpg Binary files differdeleted file mode 100644 index 7ebea7c..0000000 --- a/old/54340-h/images/i_p036.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p038.jpg b/old/54340-h/images/i_p038.jpg Binary files differdeleted file mode 100644 index 8d541b2..0000000 --- a/old/54340-h/images/i_p038.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p041a.jpg b/old/54340-h/images/i_p041a.jpg Binary files differdeleted file mode 100644 index ce5feee..0000000 --- a/old/54340-h/images/i_p041a.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p041b.jpg b/old/54340-h/images/i_p041b.jpg Binary files differdeleted file mode 100644 index b4eae6b..0000000 --- a/old/54340-h/images/i_p041b.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p044.jpg b/old/54340-h/images/i_p044.jpg Binary files differdeleted file mode 100644 index cc218c9..0000000 --- a/old/54340-h/images/i_p044.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p045.jpg b/old/54340-h/images/i_p045.jpg Binary files differdeleted file mode 100644 index 519df40..0000000 --- a/old/54340-h/images/i_p045.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p049a.jpg b/old/54340-h/images/i_p049a.jpg Binary files differdeleted file mode 100644 index a993732..0000000 --- a/old/54340-h/images/i_p049a.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p049b.jpg b/old/54340-h/images/i_p049b.jpg Binary files differdeleted file mode 100644 index 13d47a0..0000000 --- a/old/54340-h/images/i_p049b.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p053a.jpg b/old/54340-h/images/i_p053a.jpg Binary files differdeleted file mode 100644 index 6e451a9..0000000 --- a/old/54340-h/images/i_p053a.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p053b.jpg b/old/54340-h/images/i_p053b.jpg Binary files differdeleted file mode 100644 index a861af8..0000000 --- a/old/54340-h/images/i_p053b.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p055.jpg b/old/54340-h/images/i_p055.jpg Binary files differdeleted file mode 100644 index d3be75e..0000000 --- a/old/54340-h/images/i_p055.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p056.jpg b/old/54340-h/images/i_p056.jpg Binary files differdeleted file mode 100644 index 530fbb5..0000000 --- a/old/54340-h/images/i_p056.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p057.jpg b/old/54340-h/images/i_p057.jpg Binary files differdeleted file mode 100644 index ed8193c..0000000 --- a/old/54340-h/images/i_p057.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p061.jpg b/old/54340-h/images/i_p061.jpg Binary files differdeleted file mode 100644 index 9df60d0..0000000 --- a/old/54340-h/images/i_p061.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p063.jpg b/old/54340-h/images/i_p063.jpg Binary files differdeleted file mode 100644 index fec1993..0000000 --- a/old/54340-h/images/i_p063.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p065.jpg b/old/54340-h/images/i_p065.jpg Binary files differdeleted file mode 100644 index db3de64..0000000 --- a/old/54340-h/images/i_p065.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p069a.jpg b/old/54340-h/images/i_p069a.jpg Binary files differdeleted file mode 100644 index 9cbbaf9..0000000 --- a/old/54340-h/images/i_p069a.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p069b.jpg b/old/54340-h/images/i_p069b.jpg Binary files differdeleted file mode 100644 index abdb991..0000000 --- a/old/54340-h/images/i_p069b.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p073.jpg b/old/54340-h/images/i_p073.jpg Binary files differdeleted file mode 100644 index ab63bfa..0000000 --- a/old/54340-h/images/i_p073.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p076.jpg b/old/54340-h/images/i_p076.jpg Binary files differdeleted file mode 100644 index 24c4714..0000000 --- a/old/54340-h/images/i_p076.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p077.jpg b/old/54340-h/images/i_p077.jpg Binary files differdeleted file mode 100644 index a95ba94..0000000 --- a/old/54340-h/images/i_p077.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p081.jpg b/old/54340-h/images/i_p081.jpg Binary files differdeleted file mode 100644 index 843542e..0000000 --- a/old/54340-h/images/i_p081.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p083.jpg b/old/54340-h/images/i_p083.jpg Binary files differdeleted file mode 100644 index 8554b39..0000000 --- a/old/54340-h/images/i_p083.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p085a.jpg b/old/54340-h/images/i_p085a.jpg Binary files differdeleted file mode 100644 index e79ea5f..0000000 --- a/old/54340-h/images/i_p085a.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p085b.jpg b/old/54340-h/images/i_p085b.jpg Binary files differdeleted file mode 100644 index 6862e2d..0000000 --- a/old/54340-h/images/i_p085b.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p085c.jpg b/old/54340-h/images/i_p085c.jpg Binary files differdeleted file mode 100644 index a6aa374..0000000 --- a/old/54340-h/images/i_p085c.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p098.jpg b/old/54340-h/images/i_p098.jpg Binary files differdeleted file mode 100644 index 866e190..0000000 --- a/old/54340-h/images/i_p098.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p099.jpg b/old/54340-h/images/i_p099.jpg Binary files differdeleted file mode 100644 index eb449f3..0000000 --- a/old/54340-h/images/i_p099.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p100a.jpg b/old/54340-h/images/i_p100a.jpg Binary files differdeleted file mode 100644 index 8d642be..0000000 --- a/old/54340-h/images/i_p100a.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p100b.jpg b/old/54340-h/images/i_p100b.jpg Binary files differdeleted file mode 100644 index d810792..0000000 --- a/old/54340-h/images/i_p100b.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p100c.jpg b/old/54340-h/images/i_p100c.jpg Binary files differdeleted file mode 100644 index ee8d523..0000000 --- a/old/54340-h/images/i_p100c.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p101a.jpg b/old/54340-h/images/i_p101a.jpg Binary files differdeleted file mode 100644 index 9080c94..0000000 --- a/old/54340-h/images/i_p101a.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p101b.jpg b/old/54340-h/images/i_p101b.jpg Binary files differdeleted file mode 100644 index cae6562..0000000 --- a/old/54340-h/images/i_p101b.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p101c.jpg b/old/54340-h/images/i_p101c.jpg Binary files differdeleted file mode 100644 index 058e20d..0000000 --- a/old/54340-h/images/i_p101c.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p103.jpg b/old/54340-h/images/i_p103.jpg Binary files differdeleted file mode 100644 index aea9a80..0000000 --- a/old/54340-h/images/i_p103.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p104.jpg b/old/54340-h/images/i_p104.jpg Binary files differdeleted file mode 100644 index 54aae35..0000000 --- a/old/54340-h/images/i_p104.jpg +++ /dev/null diff --git a/old/54340-h/images/i_p105.jpg b/old/54340-h/images/i_p105.jpg Binary files differdeleted file mode 100644 index 48818a1..0000000 --- a/old/54340-h/images/i_p105.jpg +++ /dev/null diff --git a/old/54340-h/images/i_title.jpg b/old/54340-h/images/i_title.jpg Binary files differdeleted file mode 100644 index ab80aa4..0000000 --- a/old/54340-h/images/i_title.jpg +++ /dev/null |
