diff options
50 files changed, 17 insertions, 4307 deletions
diff --git a/.gitattributes b/.gitattributes new file mode 100644 index 0000000..d7b82bc --- /dev/null +++ b/.gitattributes @@ -0,0 +1,4 @@ +*.txt text eol=lf +*.htm text eol=lf +*.html text eol=lf +*.md text eol=lf diff --git a/LICENSE.txt b/LICENSE.txt new file mode 100644 index 0000000..6312041 --- /dev/null +++ b/LICENSE.txt @@ -0,0 +1,11 @@ +This eBook, including all associated images, markup, improvements, +metadata, and any other content or labor, has been confirmed to be +in the PUBLIC DOMAIN IN THE UNITED STATES. + +Procedures for determining public domain status are described in +the "Copyright How-To" at https://www.gutenberg.org. + +No investigation has been made concerning possible copyrights in +jurisdictions other than the United States. Anyone seeking to utilize +this eBook outside of the United States should confirm copyright +status under the laws that apply to them. diff --git a/README.md b/README.md new file mode 100644 index 0000000..c0f019f --- /dev/null +++ b/README.md @@ -0,0 +1,2 @@ +Project Gutenberg (https://www.gutenberg.org) public repository for +eBook #69360 (https://www.gutenberg.org/ebooks/69360) diff --git a/old/69360-0.txt b/old/69360-0.txt deleted file mode 100644 index 114e744..0000000 --- a/old/69360-0.txt +++ /dev/null @@ -1,1582 +0,0 @@ -The Project Gutenberg eBook of The steeple-jack's instructor, by -Clarence James Murray - -This eBook is for the use of anyone anywhere in the United States and -most other parts of the world at no cost and with almost no restrictions -whatsoever. You may copy it, give it away or re-use it under the terms -of the Project Gutenberg License included with this eBook or online at -www.gutenberg.org. If you are not located in the United States, you -will have to check the laws of the country where you are located before -using this eBook. - -Title: The steeple-jack's instructor - -Author: Clarence James Murray - -Release Date: November 15, 2022 [eBook #69360] - -Language: English - -Produced by: deaurider and the Online Distributed Proofreading Team at - https://www.pgdp.net (This file was produced from images - generously made available by The Internet Archive) - -*** START OF THE PROJECT GUTENBERG EBOOK THE STEEPLE-JACK'S -INSTRUCTOR *** - - - - - - -[Illustration: - - The - Steeple-Jack’s - Instructor - - The S. J. Lee Publishing Co. - Chicago, U. S. A.] - - - - - THE - STEEPLE-JACK’S - INSTRUCTOR - - [Illustration] - - Showing the Modern Methods Used - by Successful Steeple-Jacks - - Price $2.00 - - By CLARENCE JAMES MURRAY - - Published by - THE S. J. LEE PUBLISHING CO. - 160 NORTH WELLS STREET - CHICAGO, U. S. A. - - Copyrighted 1921 - by - The S. J. Lee Publishing Co. - Chicago, U. S. A. - - - - -CONTENTS - - - Page - - Introduction 9 - - How to Become a Steeple-Jack 9 - - The Smokestack 16 - - To Rig a Stack Without a Gimblet Wire 31 - - How to Change the Riggings 39 - - Steel Stacks with Brick Lining 40 - - Smokestacks with Ladders 42 - - Steel Stacks Decay at Band 43 - - Reguying 44 - - Tripping the Riggings 50 - - Self-supporters 55 - - Knots 58 - - Square Knot 60 - - Bow-line Knot 62 - - Half-hitches 64 - - The Black Wall 66 - - Tanks, Towers and Standpipes 67 - - Standpipes 69 - - Water Towers 71 - - Church Spires 74 - - The Flagstaff 78 - - Tops of Poles 85 - - Names of Knots, Bends, Bights and Hitches 93 - - - - -How to Become a Steeple-Jack - - -In this book I am placing before you the secrets of a trade I have -followed for fourteen years. I have made as high as $170 a day. It is a -poor Steeple-Jack who cannot make at least $25 a day. If you have the -ability, the appearance, and can approach a business man, you need not -worry about getting his work. - -He is aware of the chances you are taking. He has work that must be done, -and has an admiration for the man with nerve enough to accomplish what he -would not undertake himself. - -Steeple-Jacks are always in demand. When I speak of Steeple-Jacks, I -refer to men who comprehend that a certain thing up in the air needs -attention, whether it is the reaving of halyards on a flagpole, the -adjustment of a cross on a steeple, the replacing of a guy wire on a -stack, the repairing of the hands of a clock on a tower, or the mere -painting of any of these lofty objects which ordinary workmen are not -courageous enough to attempt. - -I know a great deal of this fascinating game, but I do not want to convey -to you the thought that I know it ALL, for that is not the truth. Bear in -mind the old adage: “We are never too old to learn.” - -I call this work a game, because it appeals to me as a great game, -although it is difficult work. People will gather in crowds on the street -to watch a Steeple-Jack at his perilous duty. I use the word “perilous” -because that is what it would look like to the man on the sidewalk, but -to one in the air it is just a trick to the trade, and he would not -exchange places with the man who is so eagerly watching every move he -makes for fear that he may make a wrong move. - -While he is thus busily engaged watching you, the following questions run -thru his mind: “How in the world did he ever get up there?” “How can he -stay up there so long?” His thoughts finally run something like this: -“My, but he certainly is brave.” - -From my experience with Steeple-Jacks I am convinced that they never like -to be called “brave,” because stunts that are pulled are all in the game, -and it is no more dangerous for a Steeple-Jack to climb to the top of a -flagpole or smokestack than for the individual to ride in an elevator, -a motor car or train, for when we consider the number of people who -are trusting to the safety of the above mentioned conveyances, and the -proportion of accidents in comparison to the number of Steeple-Jacks and -the accidents in connection with this trade, the Steeple-Jacks are not at -a disadvantage in respect to casualties. - -It is to the credit of the Steeple-Jack, however, that he is less -careless regarding the dangers of his profession than the thoughtless -traveling public. - -The Steeple-Jack considers it no more irksome to go out on a job than the -book-keeper to go to his desk or a bank teller to enter his cage. The -only difference between the Steeple-Jack and the book-keeper or bank -teller is in regard to working hours. The Steeple-Jack’s hours range from -two to four a day, while those of the tradesman are from six to ten hours -a day. The Steeple-Jack, whose day comprises about four hours (often less -and seldom more) makes =more= money in his =day= than the average man -makes in a =week=. - -As before stated, I have had considerable experience in the line about -which I write, and I therefore feel safe in saying that no man is worthy -of the title of Steeple-Jack unless he can make at least $20 a day in -days when he chooses to work less than the customary two to four hours. - -From my past experiences I have come to the conclusion that “time is -money,” and therefore my advice to any man who entertains the idea of -going into the great game of a Steeple-Jack is to always bear that slogan -in mind and never perform for the audience which you will undoubtedly -have watching you from the street. Remember it is =your= time that is -being taken up by the performance of whatever daring stunts you may be -able to “show off,” and no matter how large an audience you may have, -there are no benefits derived therefrom. - -The work of a Steeple-Jack has a great many assets besides that of -being able to earn a great amount of money. With the exception of the -money question, here are two that will appeal to every man: First, it -is healthful work, because you are always in the open air. Second, you -have no boss. You are your own boss and may come and go when you please. -However, I would not advise any man who is following this work to assume -too great an air of independence. We all concede that it helps to be a -=little= independent at times, but always bear in mind that it is the -privilege of the “other fellow” to assume an air of independence also, -and, after all, YOU are dependent upon his work. By that I do not mean -just one individual, but I am taking your trade as a whole. In business -we must give and take. Remember that. - -The Steeple-Jack’s work is ordinarily performed on smokestacks, flagpoles -and church spires. You will agree with me that there are very few who -follow this line of work. Just to prove this to you, allow me to ask you -a question: “How many Steeple-Jacks do you know?” Perhaps the answer will -be “One,” “Two,” or “Three,” and, again, it may be “Not any.” I have -worked in this business in every large city in the United States and I -can candidly say that I have had very little competition and, in a great -many cities, not any. - -Another important factor of this work is always to endeavor to please the -man whose work you are doing and never to do cheap or skimpy work, for I -have been convinced that cheap and skimpy workmanship gains nothing for -you. However, on the other hand, if you put forth your best and succeed -in pleasing the man who is to be considered, you can always count on a -renewed order the following year. REMEMBER: Satisfy the other fellow -first and you cannot help but satisfy yourself. - - - - -THE SMOKESTACK - - -To a Steeple-Jack any stack, regardless of whether it is composed of -brick, steel or concrete, is a smokestack. Undoubtedly you have heard -these stacks referred to as chimneys; nevertheless, from now on we will -call them smokestacks. - -Steel smokestacks are supported by guy wires. As a general rule two sets -of guy wires support a steel stack, but I have often found a smokestack -supported by three sets of guy wires. These guy wires consist of four -wires to a set. - -There is supposed to be a wire which runs through a sheave from the top -of the stock to enable the stack man to rig up. This wire is flexible -and is called a gimblet wire. Above all things, do not use this gimblet -wire for ascending purposes; by that I mean in such a manner as to cause -the weight of your body to rest upon this wire, as there is often great -danger in an act of this kind. - -Read carefully the following few lines and you will be convinced of the -risk you are taking by endeavoring to ascend on the gimblet wire. - -If the gimblet wire in question has been in that position for a year, in -all probability it is rotten at the point where it runs through the hook -at the top of the stack, and it would not take much weight to loosen it. -So bear in mind, no matter how light or heavy in weight you may be, do -not climb up on the gimblet wire. - -The following is a more simple and far more safe way of getting to the -top: - -First of all, get a board from six to nine feet in length and two to -three inches in depth. Take one end of the gimblet wire and tie it to -the end of your board, and fasten the other end of the wire to the board -about three feet from the end. Take your stack hook—a hook of good ⅝-inch -steel. This hook should be about fourteen inches long, the hook being six -inches long; a five-inch opening with an eye opening of about two inches, -so that you can hook your block and tackle to it. Attach your stack hook -to the board on the side opposite to where your gimblet wire is fastened. -Be sure the hook is turned towards the stack. - -[Illustration: Ready to Pull the Rigging Up] - -[Illustration: The Boatswain Chair] - -When this is done, pull on the wire; that will draw up your riggings, -reaving your block and falls out to the size of the stack, so as to -enable you to keep them from twisting with the gimblet wire. Now, then, -should this board be weak and break while you have your riggings near -the top, to prevent them from falling down and one end of the gimblet -wire from running to the top, tie a heavy piece of cord to the end of the -gimblet wire, running it to the other end of the wire, then fasten to -your blocks. - -This will prevent a hard day’s work untangling your riggings from the guy -wires, should the board break. - -[Illustration: Tripping Riggings on Top of Stack] - -After drawing your rigging to the top, the board drawn tight up to the -block on top of the stack, pull on the gimblet wire that is attached -to the end of the board. This motion brings the end of your board -bearing the hook and rigging up. In some cases, the stack being small in -diameter and the board being too long, the hook will stick far out from -the stack, and with all hard efforts will not lodge it over the top. When -you have this proposition to contend with, leave the stack about three or -four inches on the gimblet wire that holds the board tight to the block -on the stack. In some cases you have to drop the board as far as from two -to three feet below the block, in order to get your hook in a position -where it will settle over the top of the stack with the hooked part -inside of the stack. - -This is very important. Be sure that the hook is not only setting on -top. This can be determined by twisting all four lines, making them one -bundle; then by giving the lines a few switchings back and forth in all -directions. When this is done and you have fully convinced yourself that -the hook is properly over the top, then your next move is to start for -the top. - -If it is your first time in a boatswain chair, I would suggest that you -sound yourself first as to dizziness. This can very easily be done by -the following method: - -Stand along the side of the stack, throwing your head to one side and -looking up, allowing your eyes to follow the stack and the clouds, -shaking the head at different times. This brings on dizziness. Then stand -erect, so as to clear your head. After getting into the boatswain chair, -you place the fall line of your riggings—that is, the line with which you -draw yourself up—between your legs. This enables you and your helper to -pull more steadily together, and you get to the top much quicker. - -I have noticed that the majority of stack men regard this as the most -difficult part of the job—drawing to the top. Once up, the job is half -done. - -After you reach the top of the stack, the first thing to be done is to -cut away the string that holds the stack hook to the board. You then -lower the board to the ground. Still tied by the wire to the board -for further use in case you want to trip off with it when the job is -finished. - -There is still an easier way, which I will explain later. Now we will say -the work you are to do is paint. For your information I will say that oil -paint is preferred by Steeple-Jacks for several reasons, some of which -are: It is easy to apply in all kinds of weather; you are bound to get -plenty of it in the face, and it is easier to wash off than tar. From my -personal experience I have found that graphite and oil preserve a steel -smokestack better than any other. You will come in contact with people -who will differ with you as to this point; however, when you meet with -a difficulty of this nature, give the man what he asks for. If he wants -water, give him water; if he desires to have tar, give it to him, but if -he wants something good, then suggest an oil paint. Graphite and oil—the -preservable. - -A great number of men with whom you deal will say: “I want tar on my -stack.” I have learned from my own personal experience that the answer -which will in nine cases out of ten take with the man with whom you are -dealing is something on this order: “If you want tar, all right, but -it will cost you =more= money.” He will immediately confront you with -a question similar to this: “Why is that?” Your reply should be: “If I -put tar on your smokestack and come back next year for your work, you -will refuse me, because tar blisters in places and rust forms under the -blisters, which prevent the rust from being seen, and in a few years -there are holes in the stack, whereas an oil paint wears off, showing the -rust spots.” - -[Illustration: Changing Positions on Top of Stack] - -However, I am running away from my story. We will go back to the top -of the stack. You look down, getting straight above a guy wire, reach -over as far as you can and paint, leaving the space directly in front -clear; drop down about ten feet, painting as you go; draw up to the top -again, switching the stack hook over and directly above the next nearest -guy wire. In order to accomplish this, take an extra hook similar to -your stack hook and about seven feet of ½-inch line. Place the extra -hook over the top; tie the other end of the sling to the rope of your -boatswain chair, making it good and secure. Then lower your weight from -your rigging until it rests on the extra hook and sling. You then draw -your regular stack hook up to the extra hook. When this is done you -pull your weight again to your riggings and push the extra hook around. -Do this until you get to the position you want, just above the next -nearest guy wire, repeating the same as you did above the other guy wire, -painting about ten feet down. When this is done, draw back to the top, -using the same method to get over to the middle of the two spaces you -have painted. - -Then start to paint between the two spaces already completed. By so doing -you are able to make a larger sweep on your way down. In order to make -time on a stack it pays to have a helper on the ground, so as to take the -end of the fall line or handy line and pull you around and by doing this -also help to keep you in to the stack, which enables one to work to a -better advantage and much quicker. Remember, “Time is money,” and there -is lots of it to be made. - -The opportunity is there. Tradesmen of all walks of life say: “Gee, -business is dull in my trade. If I only had the opportunity that some -people have.” A Steeple-Jack should never say that, because there is -always work to be done on a smokestack the year ’round. Don’t be afraid -to ask for it, and also a price. Yours is not a common trade. It takes -brains, brawn and nerve, so don’t permit your nerve to fail you when you -are asking a price. - -Another thing to be careful of is not to allow your rope to get caught -and tangled in the end of a guy wire attached to the stack at the band. -Should this happen, it may put you in a very hazardous position. Give -this a glance now and then and, should such a thing happen, do not get -excited and start tugging. The more you tug, the tighter it gets. Have -someone to switch it out from the ground. It is possible to do this from -the air. - -[Illustration: Showing Falls Caught in Guy Wire] - -High wind is the Steeple-Jack’s greatest enemy. It is only a fool who -would attempt to rig a smokestack when the wind is blowing a gale; in -fact, it is almost impossible to work in a high wind. More work can be -accomplished in one-fifth of the time on a calm day. “Time is money,” -but always take time when your life is at stake. Always keep in mind the -motto: “Safety First.” - -When tying up your riggings for the night, and it might be calm at the -close of the day. Weather changes in a very few minutes at times. To -safeguard against the rope from wearing against the stack and guy wires, -walk out about fifteen feet from the stack, taking a piece of extra -sling. Tie the sling to some object that is solid, throw two half-hitches -with your fall line around the riggings just above the single block. When -this is done, pass the sling which you have tied to some object through -the hook of the block, making it fastened to the block. Then pull the -slack out of your riggings with the fall line, at the same time keeping -the two half-hitches just above the block. Do not take up all the slack; -leave some play in your lines, using your own judgment as to whether the -lines will come in contact with the guy wires. The weather will shrink -the line more or less. - - - - -TO RIG A STACK WITHOUT A GIMBLET WIRE - - -When this proposition confronts you it may look to you like a job not -worth fooling with. It can be done and, on some stacks, almost as quickly -as with a gimblet wire. - -There are a number of ways to rig without the aid of a gimblet, of which -I will show you two of the quickest and most simple. - -Look over your guy wires and pick out the most solid of the lot running -to the top band. Make sure of its anchorage. There are supposed to be two -clips at each end of a guy wire where it is connected to the turn-buckle, -and at the band place the double block without the stack hook on the guy -wire. - -Tie a long and heavy line to the block. Take this line, passing it around -all the guy wires with the exception of the one the block and falls are -attached to. Then reave out your line to what you would figure the length -of the stack to be. You then take hold of the line that is around the -guys, pulling on it and at the same time switching on your rigging. -Unless the guy wire is slanting at about 45 degrees down, your rigging -will slide up very easily. - -With this system it is possible to get your rigging to within a very few -feet of the top band, then tie off your tug line, be sure to some object -that is good and solid. Remember your weight will be on that, and also -your life. - -SAFETY FIRST always. You only fall once. Use every safety device -available. Remember this book only tells you how to rig, but it takes -common sense while following these methods, and that is, take no chances -where you =think= a thing will hold. Be =sure= it holds. - -The first thing to do when getting into the boatswain chair is to see -that your lines are not twisted. Have your helper walk out some fifteen -or twenty feet from the stack. Take the fall line with you on your way -up. The stack hook, extra hook, sling string, small stick, hang line, -and you are ready. - -Quite a load going up! After placing the line between your legs and -your helper stands away out, this helps to avoid the twisting of your -line. While going up remember this: A very steady pull, the two pulling -together. Long grabs and jerks are liable to prove disastrous, as it may -cause the line to snap. Half-inch line has tremendous straining power; -nevertheless, there are flaws in rope and rope also rots. - -My first experience on a stack I remember I wanted to buy 1½-inch line. -Now wouldn’t I have had a wonderful time trying to get that ton of rope -to the top of a smokestack! Since then I have used ¼-inch rope, but that -is too small. At any rate I had the correct idea of “Safety First” at -the beginning. However, ½-inch is the proper size for a job not over two -hundred (200) feet high. - -Now, when nearing the top guy wire, have your helper slack up, allowing -you to continue the pull alone. When the two blocks are together tie a -safety line to the wire. Tie the extra hook to the stick and the end of -the sling to your chair, then in the hook, passing the hook over and in -the eye of the band. Pull the stick away from the hook. You then tie the -stick to the block attached to the guy wire. After this is done, lower -yourself until your weight rests on the line hooked in at the band. - -Make sure when lifting the riggings away from the wire that they don’t -fall, leaving you up there in a great predicament. If this should happen, -you will agree with me on that point. - -Experience is a great teacher. I have had this experience: On lifting -the block away from the wire, place it in the eye of the band; also draw -yourself up close to the band. Untie the sling, tying it closer to the -hook, then draw up a long pole—the size you figure you will need to reach -the top with. Tie the stack hook to the pole; put the block and falls in -the hook; push it to the top. - -[Illustration: Poling to the Top of a Smokestack] - -Now, not in all cases is this as easy to do as to say. If the top is only -fifteen or twenty feet from the band, it can be done without much effort, -but should it be a reach of thirty or thirty-five feet, I would suggest -the following method: - -Tie a hook to the pole just so it will stay on. A light hook is required -for this. Place your handy line through the eye of the hook. Tie the -handy line end down about eight feet from the top of the pole, then lash -yourself to the band, pull yourself up and stand in the chair, throwing -one leg over the guy wire. Make yourself good and solid, spread your feet -out in the chair. Do not have them together. This sometimes prevents the -chair from sliding to one side. Above all remember never to let your -riggings get away from you. You are in a mighty tiresome position. Always -be sure to have a handy line with you in making a reach of thirty or -thirty-five feet. Figure your pole, which is only two by two or so, is -easily broken in a little wind. I have had poles break eight or ten times -before reaching the top of a stack. - -Now, in pushing the pole up with a handy line, always wait until the wind -ceases for a second, then up with it. This has to be done quickly. With -the pole leaning against the stack once over the top, pull the pole away -from the light hook, lower the pole until the top end is at the band. -Tie on the hook and block, then, with the handy line now over the top, -pull on it and at the same time push on the pole with a steady push and -pull. The rest is very simple. After this is accomplished, undo yourself -from the band, lowering yourself into the boatswain chair. Hook up the -riggings to the chair, start for the top, cut away the pole, lower it -down and start your work. - -[Illustration: Climbing Guy Wire with Slings and Chair] - - - - -HOW TO CHANGE THE RIGGINGS - - -When completing one side of a stack and in order to get the tackle to -another position on the stack, twist the rope, making it all in one; then -leave a little slack to make a snake whip movement towards the top, and -you will have the satisfaction of seeing your rigging move around on the -top. If the wind is blowing hard, perhaps you will have to do several of -the switching movements before getting the hook to start to move. Then -take the line around the guy wire and you are ready for the next set. - - - - -STEEL STACKS WITH BRICK LINING - - -You will encounter a little difficulty in the shifting of your riggings -from the ground when you are working on steel stacks with brick linings. -In fact, you will save time by not trying to shift from the ground. If -the brick extends all the way to the top, you will have to have a hook -large enough to spread over the steel and brick. - -It is wise to go to the top, whether you have to tow it over fresh paint -or not. In doing this you have your helper walk out some fifteen or -twenty feet. You then place your legs around the fall line; after this is -done both you and your helper pull together. - -In this movement you are going up backwards with your back towards the -stack, until about half way up; then turn with your face towards the -stack. Daub the tips of your shoes with paint; this helps to cover up -the prints of your shoes on the fresh paint. If you do not comply with -this rule, the print of your shoes on the fresh paint will look from the -ground as if those spots had never been painted, and would tend to leave -a bad impression as to your workmanship with the man for whom you are -doing this work. Neat and impressive work draws more returns. On reaching -the top an equal size hook is required, as aforesaid, with the sling, -afterward having your helper take the fall line over the guy wires and -you are ready to do another set. - - - - -SMOKESTACKS WITH LADDERS - - -There is no use of going into detail about rigging a stack that has a -ladder on it. This can be answered in a very few words: Walk up the -ladder and hook the rigging over the top. But there is this much about -it—Watch your step! These ladders after a few years become very rusty and -the bolts where connected from the inside are sometimes eaten away by -the gas from the coal, and just a little weight on them might cause the -handles to give way. So always remember to be very careful when climbing -a smokestack that has a ladder connected to it. - - - - -STEEL STACKS DECAY AT BAND - - -You will notice that as a general rule steel stacks commence to weaken at -the first half-dozen sections from the top downward, or at the band. The -rain hitting the in- and outside from the top, and lying around the band, -is causing the rust to form more quickly than on any other part of the -stack. This accounts for the aforesaid parts weakening the quickest. - -It is always wise to sound a stack at the top and band so as to determine -whether it will stand much tugging or bouncing upon. If it looks weak and -you make up your mind that you will go through with what you are doing, -I would suggest that you do all the pulling and take just what tools you -can possibly get along with. - - - - -REGUYING - - -To reguy a smokestack it is necessary to have these parts before the job -is really called complete: Turn-buckles for the bottom ends of the guys -and clips for both ends. Although you can guy a smokestack without these -articles, it is best to have them. Without the aid of the turn-buckle to -draw the slack out of the guy wires, a device like this can be used: Lash -the guy wire with a sling, using two half-hitches so as to grip the wire. -Tie a bow-line knot at the opposite end so as to enable you to attach the -block and fall, placing the opposite block in the eye of the guy wire -anchor, then by pulling on the fall line, this takes the slack from the -wire, even with the turn-buckles. Sometime you will have to resort to -this method in order to take up the loose slack. - -[Illustration: Drawing Guy Wire Tight with Block and Falls] - -When guying a stack the first thing to do is to place the spool that -holds the wire between two boxes of equal size. Take your handy line and -a small single block when going up to attach the guys; hook this single -block to the eye of the band at the position where you are to work; have -your helper tie the handy line about three feet down from the end of the -guy wire, and then bend the wire double. You then have your helper do -the pulling up of the guy wire. Should you do the pulling while sitting -in the chair, you would soon notice the strain from it in the stomach. -As you have nothing under the feet to press the strain there, it really -falls to the stomach to receive all the hard work. Always leave some -slack to the guy wire. - -A stack must vibrate to a certain extent, therefore if the guy wires are -drawn as tight as they possibly can be, the chances are the result would -be a broken wire or an anchor giving way. - -[Illustration: Helper Pulling Guy Wire Up to Stack Band] - -In using clips to fasten the wire at both ends, they should be a size -larger than the guy wire, and when clips are not available, allow about -two feet over. After passing guy wires through the eye of the band or the -eye of the anchor, take a piece of gas pipe of a size that will slip -down over the guy wire some foot or a foot and a half, then twist the -end of the guy wire with the gas pipe around the other part of wire that -extends down. This is a wonderful way to fasten the wire to the stack, -and will last as long as the stack will. - -[Illustration: Turning Guy Wire with Steel Pipe] - - - - -TRIPPING THE RIGGINGS - - -Tripping the riggings off the stack after the job is completed takes -only the work of a few minutes. See to it before making the last trip -up that you have that necessary appliance with which to save you a few -unnecessary trips up and down. - -Take a small steel bar about ¼-inch in size and bend it into the shape of -the letter S. Judge the diameter of the band on top of the stack; make -the hook so it will fit snugly on top. This hook should not be over five -inches long. After placing the trip hook on the stack, take your handy -line, lay it on the hook, tie the end of your line in the eye of your -stack hook, then tie up about two inches above the eye in several places. -The last two tie-offs will prevent the stack hook from falling to one -side. - -[Illustration: Handy Line Attached from S Hook to Stack Hook] - -[Illustration: Results of Turning Hook in Wrong Direction] - -[Illustration: Hook Turned in Proper Direction for Tripping] - -After leaving the stack, have your helper tie the handy line away from -the stack. This flopping back and forth will annoy you while at work. -After you have finished and are ready to trip, twist the rigging until -it is twisted all the way to the top. In doing this twist the rope so -that the stack hook will turn out and away from the trip hook. This is -important. Leave slack on the riggings at the same time. Do not let it -untwist. Then take the trip line, pull steady on it, until you see the -stack hook raise up and over the stack. Then lower on the trip line until -you see the stack hook is off and below the top of the stack. Then let go -of the riggings so they will untwist; lower away; untie the handy line -from the block hook; then pull one end of the handy line to the top. It -will go through the small S up there and fall to the ground, leaving the -small S hook on top of the stack. - - - - -SELF-SUPPORTERS - - -Steel smokestacks are generally supported by guy wires, although there -are some steel stacks without guy wires, which are called self-supporters. - -Self-supporters taper at the base and have an extra heavy foundation and -a ladder to enable you to climb to the top, although in my travels I -have come in contact with one self-supporter that had neither ladder nor -gimblet wire. Fortunately this self-supporter was very small in diameter. - -In order to make the top of this particular stack I had to rely on an -extension ladder, working my way up by degrees; first lashing the ladder -to the stack, extending it as far as safety would permit, then lashing -the stack again with an extra large sling about ¾-inch, making a bow-line -knot and with a sling to both sides of the ladder I used the block and -fall, pulling the bottom part of the ladder up as far as possible, -lashing off again, then pushing the top part up. - -[Illustration: Ladder Lashed to Self-Supporting Stack] - -After making the lower half of the extension ladder solid at the top and -bottom so as not to permit it to sway to either side, climb the top half -of the ladder, lashing the stack again, and repeat as before. Guy wires -have to be replaced from time to time, as these wires rust and fall down, -leaving the stack to the mercy of the winds, if not attended to before -they become so badly decayed. - -As stated before, stacks that are supported by guy wires have from one to -three sets, and generally four wires to a set. A ½-inch galvanized wire -is sufficient for any stack, although some people prefer a larger size -wire for double safety. - - - - -KNOTS - - -Knots are a very important factor in the Steeple-Jack’s life. Only knots -that have been properly tested should be used. Many a terrible disaster -has been caused by the use of a knot which was quickly invented by a man -and never tested. Avoid such accidents by learning to tie knots in the -proper fashion. - -Slip knots are bothersome as well as dangerous to both the person -working in the air and the people walking underneath. There are very few -knots that are useful to the Steeple-Jack, and it is well for every man -following this trade to learn to make these few knots well and thereby -avoid delay when in need. - -For instance, if you were on the top of a stack and saw a part of your -rigging that did not look any too safe, or you were near a band and -saw your hook was only sitting on top of the stack and not inside, as -it should be. A sling and the knowledge of tying knots properly is -required. Practice until you are thoroughly familiar with this important -part of your trade. - - - - -SQUARE KNOT - - -As I said before, slippery knots are bothersome in many cases. When you -use the slip knot the only way to get it out is to cut the line; then you -are disfiguring the line or shortening it. - -The square knot and the bow-line knot are the ones most commonly used. - -In tying a square knot take the ends of the rope, passing the left end -over and under the right, and then take the right end and pass it over -and under the left. - -In trying to make the square knot there often forms what is known to line -men as “the granny,” which is useless for any hazardous purpose. Follow -the instructions of right over and left over and you can’t go wrong in -making the best-liked knot of all—the SQUARE KNOT. - -In using the square knot while working in the chair, make two half -hitches in each end of the line. This is used to insure double safety. - -When using the square knot for the purpose of adding more line to the -riggings, tie both ends of the lines (as illustrated on page 61). - -[Illustration: Square Knot] - -[Illustration: Granny Knot] - -[Illustration: Square Knot Sized at Both Ends] - - - - -BOW-LINE - - -A more efficient knot than the bow-line knot was never known. This knot -is used more than any five knots put together in the Steeple Jack’s work. - -The bow-line knot is mostly favored in climbing a flagstaff, when making -the stirrup to climb, and in many ways for the smokestack. - -In making the bow-line knot follow the illustrations according to -numbers. In No. 1 the rope is formed in a bight; pass No. 1 through the -bight under then over and then under, as illustrated in No. 2; then over -and down through the bight as illustrated in Nos. 3 and 4. Draw tight as -illustrated on page 63. - -As I said before, the bow-line knot is a very useful knot on the -flagpole. By placing the sling around the pole, passing the end through -the eye, then make your bow-line knot, leaving the loop for the size of -your foot so as to slip your foot in. - -[Illustration: How to Tie the Bow-line Knot] - - - - -HALF HITCHES - - -The half hitch is used very frequently by the Steeple Jack, especially in -tying off the riggings for the night or pulling up a pole or paint. In -making the half hitches, pass the end around the object you are tying, -then over and around, standing part between the object and itself; then -under and around the standing parts and between own loop and the one -first formed. It is no more difficult and takes no longer to make this -knot than it does for you to count three. Illustrations on page 65. - -[Illustration: Half Hitch] - - - - -THE BLACK WALL - - -The Black Wall, known by many as the chair hitch, is used by the Steeple -Jack while working in the chair up or down; stopping to rest or work, -reach through the rope of your chair, grab the fall line by the right -hand, pulling it through between yourself and the rope of your chair. At -the same movement turning the rope from left to right making a loop in -this movement, reach up and set it on the hook of the block at the chair; -while doing this reach with the left hand and hold your four lines tight -together. This prevents you from going down while making the Black Wall -or chair hitch, as it is commonly known. - -[Illustration: Black Wall Knot] - - - - -TANKS, TOWERS AND STANDPIPES - - -Water tanks, water towers or water standpipes are an easy matter to work -on as far as the rigging is concerned, but not as much money is to be -made as on smokestacks, church steeples and flagpoles. Nevertheless, they -are worth soliciting. - -Take, for instance, a water tank. A water tank consists of only the tank -itself sitting on a flat roof or ground. Water tanks vary in size. - -We will say a tank twelve (12) feet in diameter, fifteen (15) feet in -height, with very little rust scales. This tank can be painted in about -three hours and requires no more than three and one-half gallons of oil -paint. I have received as high as Sixty ($60.00) Dollars for a few hours’ -work on tanks of this kind. - -[Illustration: Painting Water Tank] - -Standpipes are more on the order of smokestacks. Some have brick -foundations running up a third of the way and again others have brick -half of the way up and the other half steel, while you find some that are -all steel from the bottom to the top. - -All standpipes have ladders going to the top, therefore it is an easy -matter to rig such standpipes with a set of falls and work in a boatswain -chair. - -For an example we will take a standpipe that is made of steel and that -is one hundred and twenty-five (125) feet in height, twelve (12) feet -in diameter. A standpipe of this kind would require about eighteen (18) -gallons of oil paint. It would take one man working in a boatswain chair -about three and one-half (3½) days. It is always safe to ask about -$250.00 for a job of this nature. - -[Illustration: Painting Standpipe] - - - - -WATER TOWERS - - -A chair man considers a water tower more difficult to work on than the -two mentioned previously. - -The majority of water towers are supported by four stiff legs. Some have -more and very few less. You will find very few water towers that stand -less than one hundred and fifty (150) feet high. - -To paint a water tower it is best to start on the tank proper, tying -a rope over the ball or pole that extends from the top of the tank, -allowing enough rope so that it will extend to the edge of the roof of -the tank, then attach the block and falls to same. Take the other end of -the rope, which is attached to the top of the tank, running it down on -the opposite side from where you are going to work, and there fasten it -securely to the beam under the platform to the other side. - -[Illustration: WATER TOWER] - -Attach the riggings at the top of each stiff leg to the platform while -working down the leg supports. - -It takes considerable time and plenty of patience when working on a water -tower. - -A water tower one hundred and fifty (150) feet high with four stiff legs -and the tank proper about twelve (12) feet in diameter by twenty (20) -feet in height will require in the neighborhood of twenty-five (25) -gallons of oil paint. It will take one man approximately four days and -a half (4½). It should not be difficult for you to secure about Three -Hundred and Fifty ($350.00) Dollars for a job of this kind. - - - - -CHURCH SPIRES - - -A tapering construction and not a hard job to rig after once tried. If -you are capable of rigging a church spire, then it is an easy matter for -you to rig a church dome or any other structure of that nature. - -For the majority of church jobs an extension ladder is the handiest -article. After drawing the extension ladder up to what is known to the -Jack as the pigeon hole window in the church spire, build your platform -from the window with 3×4 lumber, extending it out some six feet; lower -a line down on both sides of the window, having your helper tie the two -ends together around the lower section of the spire. Then by drawing it -to the window you will have your first loop around the steeple. Place -the extension ladder on the platform; nail two boards to the inside of -the window, then attach other ends of boards to the ladder. Use all the -safety devices available when going out on the ladder. Lash the ladder -wherever it is possible and also yourself by placing a line under the -arms and tying the line that you have around the spire, working it up as -far as you can go, then lash this to the ladder so as to keep the ladder -from swaying to the left or right. - -[Illustration: Showing Ladder Position from Pigeon-hole on Spire] - -An extension ladder will bring you within a distance from which you can -easily lasso the spire. Then by using the system already mentioned in -the self-supporting stacks without ladders you will be in a position to -accomplish any work you are on the spire for. - -[Illustration: Showing Where Riggings Should Be Lashed at Top of Spire] - - - - -THE FLAGSTAFF - - -Although the flagstaff is the most simple part of the Steeple Jack’s -work, at the same time it is the most dangerous. Before climbing a wooden -pole look all around it first to see if any cracks are visible. In all -probability there are, as most wooden poles are cracked. If the crack -runs up and down then the pole is safe, unless it is dry rot, but if the -crack runs crosswise on the pole watch your step. Chances are it will -hold, but again it might not. Watch your step, because no one will watch -it for you. Remember, a man can only fall once. - -[Illustration] - - - - -THE STAFF - - -The flagpole is composed of the following parts: The pole ball, spindle, -truck, sheave, cleat, brace and halyard. - -The halyard is the rope with which the flag is drawn up to the top, and -it is never used for climbing purposes. The art of climbing a flagpole -with ease and performing that which is to be done upon the pole will be -explained in detail later on. - -The ball on the top of the staff plays no important part. It is used more -for ornamental purposes than anything else. - -The spindle is the rod that runs from the ball through the truck into the -pole. - -The truck holds the sheave. - -The sheave holds the halyard. - -The cleat is for the purpose of tying the halyard to a few feet from the -base of the pole. The majority of poles have iron braces for support -connected about six (6) feet up from the base of the pole. - -From experience I find the steel pole the most dangerous. In my opinion -it is more dangerous than the wooden pole for the reason that rust forms -inside of the steel pole and around the bands where it is connected, and -in the winter time it is easily broken by the cold weather if any weight -is put on it, whereas the wooden pole can be tested by sounding it as to -its condition. - -If the wooden pole has the dead sound it is in all probability dry rot, -and with a pole of this kind I would advise you to be extremely careful. -Never sway such a pole any more than you absolutely must, and take plenty -of time in climbing it. A pole in this condition gives no warning before -it breaks, but a pole with plenty of sap gives a cracking sound before it -gives way, which gives the man working on it a chance to slide to a more -secure position. - -[Illustration: Climbing Flagstaff With Slings] - -A boatswain chair and two slings are the only tools necessary to work -on a flagpole. Take two slings made of at least ½-inch line, splice an -eye in the end of each sling—the eye being about two inches in diameter; -place the sling around the pole, drawing the end opposite from the eye -through the eye; do likewise with the other sling; tie the boatswain -chair to the top sling, allowing five inches from the rope of the -boatswain chair to the eye of the sling; tie a loop in the end of the -lower sling—tying a bow-line knot. This is called a stirrup. Leave the -same distance from eye to knot as from the chair to the knot. Get into -the boatswain chair. - -The first thing to do is to see that the loop around the pole is as tight -as it will go. Then place your foot in the stirrup, take hold of the pole -to steady yourself, raise up in the stirrup, and with the right hand push -the sling holding the chair up, again making the sling tight to the pole. -Sit down in the chair, reach down and pull the stirrup sling up until you -can get your foot in. Repeat these movements and you will see how simple -it is to climb without exerting yourself. - -At every movement going up and coming down make sure that the sling that -holds the chair is secure and thereby prevent it from slipping down. -Should it be loose and slip down and your foot in the stirrup, the result -would undoubtedly be that you would be dangling in the air head down. -Avoid all of this by taking every precaution. - - - - -TOP OF POLES - - -At any time you are working on a flagpole and the work consists of -replacing a truck, ball or spindle, the only thing to do is to make sure -of the pole being solid enough for a little swaying. If so, take a sling, -lash yourself to the pole under the arms as a back brace, then reach up -and pull yourself up and stand in the chair. Avoid shaking the pole as -much as you possibly can. Then draw up the saw. - -Saw off about one foot of the top, take a brace and bit, drill the holes, -chip off around the edges and set your new truck on. The spindle should -be set about from 8 to 10 inches down in the pole, then wedge in with -small sticks to make it solid. - -In painting a flagpole use the halyard to hold your paint. Twist the rope -several times to keep it at the same distance as yourself. In painting a -pole work down as you work up. - -[Illustration: Working the Top of a Flagstaff] - -[Illustration: S Hook Used for Tripping Purpose] - -[Illustration: Swivel Snap] - -[Illustration: Cleat] - -[Illustration: Top of Flagstaff] - -[Illustration: Five-inch Brush Is Mostly Used by Steeple-Jacks] - -[Illustration: Come-along Used for Tightening Guy Wire] - -[Illustration: Double Steel Ball-bearing Block Is Preferred by the Stack -Man] - -[Illustration: Single Steel Block] - -[Illustration: Clip] - -[Illustration: Guy Wire with Clips] - -[Illustration: Turn-buckle] - -[Illustration: Gimblet Block] - -[Illustration: Extension Ladder] - - - - -PRICES TO CHARGE FOR WORK - - -Prices vary in the different parts of the country, so it is really -difficult for me to give you exact pointers on that, but we will take for -an example a smokestack one hundred and fifty feet (150) feet high, six -(6) feet in diameter, in six sections of the United States. These prices -are figured on the basis as follows (the firm or individual for whom you -are doing the job is to furnish the paint under these prices): - - New York, N. Y. $130.00 - Chicago, Ill. 170.00 - Denver, Colo. 170.00 - San Antonio, Tex. 140.00 - New Orleans, La. 135.00 - San Francisco, Cal. 130.00 - -The following prices are used as to flagstaffs sixty (60) feet high: - - New York, N. Y. $35.00 - Chicago, Ill. 40.00 - Denver, Colo. 40.00 - San Antonio, Tex. 35.00 - New Orleans, La. 35.00 - San Francisco, Cal. 35.00 - -With reference to forty (40) foot staffs, use the following schedule: - - New York, N. Y. $25.00 - Chicago, Ill. 30.00 - Denver, Colo. 30.00 - San Antonio, Tex. 25.00 - New Orleans, La. 25.00 - San Francisco, Cal. 25.00 - -As above stated, these are not standard prices, but it is safe for you to -quote your prices along these lines. - - - - -NAMES OF KNOTS, BENDS, BIGHTS AND HITCHES - - - Black Wall Hitch - Bow Knots - Bow-line - Bow-line on bight - Bow shortening - Builders’ hitch - Builders’ knot - Butchers’ knots - Catspaws - Chain hitch - Chain knots - Clinches - Close band - Clove hitch - Crown knots - Cuckolds’ necks - Deadeyes - Dogshanks - Double chain - Double crown - Double figure-eight - Double knots - Double wall - Double wall and crown - Eye splice - Figure-eight knot - Fisherman’s hitch - Fisherman’s knot - Fivefold knot - Flemish eye - Fourfold knot - French shroud knot - Gaff-topsail halyard bend - Garrick bend - Gordian knot - Granny knot - Gunner’s knot - Half-hitch - Half-hitch and seizing - Half-hitch - Hawser hitch - Hawsers - Hitches - Larks’ heads - Magnus hitch - Manrope knot - Matthew Walker knot - Midshipmen’s hitch - Mooring knots - Open-hand knot - Ordinary knot - Overhand knot - Pier bend - Reef knot - Reefing knots - Roband hitch - Rolling hitch - Running bow-line - Running knot - Sailors’ knots - Sheepshanks - Short splice - Shroud knots - Simple hitch - Simple knots - Sixfold knot - Slip knots - Slippery hitch - Square knots - Stopper knot - Threefold knot - Throat seizing - Timber hitch - Tomfool knot - Treble knot - Turks’ caps - Turks’ heads - Twist knot - Wall knots - Waterman’s knot - Weavers’ knot - Wedding knot - Whipping - Wind knots - - -THE END - -*** END OF THE PROJECT GUTENBERG EBOOK THE STEEPLE-JACK'S -INSTRUCTOR *** - -Updated editions will replace the previous one--the old editions will -be renamed. - -Creating the works from print editions not protected by U.S. copyright -law means that no one owns a United States copyright in these works, -so the Foundation (and you!) can copy and distribute it in the -United States without permission and without paying copyright -royalties. Special rules, set forth in the General Terms of Use part -of this license, apply to copying and distributing Project -Gutenberg-tm electronic works to protect the PROJECT GUTENBERG-tm -concept and trademark. Project Gutenberg is a registered trademark, -and may not be used if you charge for an eBook, except by following -the terms of the trademark license, including paying royalties for use -of the Project Gutenberg trademark. If you do not charge anything for -copies of this eBook, complying with the trademark license is very -easy. You may use this eBook for nearly any purpose such as creation -of derivative works, reports, performances and research. Project -Gutenberg eBooks may be modified and printed and given away--you may -do practically ANYTHING in the United States with eBooks not protected -by U.S. copyright law. Redistribution is subject to the trademark -license, especially commercial redistribution. - -START: FULL LICENSE - -THE FULL PROJECT GUTENBERG LICENSE -PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK - -To protect the Project Gutenberg-tm mission of promoting the free -distribution of electronic works, by using or distributing this work -(or any other work associated in any way with the phrase "Project -Gutenberg"), you agree to comply with all the terms of the Full -Project Gutenberg-tm License available with this file or online at -www.gutenberg.org/license. - -Section 1. General Terms of Use and Redistributing Project -Gutenberg-tm electronic works - -1.A. By reading or using any part of this Project Gutenberg-tm -electronic work, you indicate that you have read, understand, agree to -and accept all the terms of this license and intellectual property -(trademark/copyright) agreement. If you do not agree to abide by all -the terms of this agreement, you must cease using and return or -destroy all copies of Project Gutenberg-tm electronic works in your -possession. If you paid a fee for obtaining a copy of or access to a -Project Gutenberg-tm electronic work and you do not agree to be bound -by the terms of this agreement, you may obtain a refund from the -person or entity to whom you paid the fee as set forth in paragraph -1.E.8. - -1.B. "Project Gutenberg" is a registered trademark. It may only be -used on or associated in any way with an electronic work by people who -agree to be bound by the terms of this agreement. There are a few -things that you can do with most Project Gutenberg-tm electronic works -even without complying with the full terms of this agreement. See -paragraph 1.C below. There are a lot of things you can do with Project -Gutenberg-tm electronic works if you follow the terms of this -agreement and help preserve free future access to Project Gutenberg-tm -electronic works. See paragraph 1.E below. - -1.C. The Project Gutenberg Literary Archive Foundation ("the -Foundation" or PGLAF), owns a compilation copyright in the collection -of Project Gutenberg-tm electronic works. Nearly all the individual -works in the collection are in the public domain in the United -States. If an individual work is unprotected by copyright law in the -United States and you are located in the United States, we do not -claim a right to prevent you from copying, distributing, performing, -displaying or creating derivative works based on the work as long as -all references to Project Gutenberg are removed. Of course, we hope -that you will support the Project Gutenberg-tm mission of promoting -free access to electronic works by freely sharing Project Gutenberg-tm -works in compliance with the terms of this agreement for keeping the -Project Gutenberg-tm name associated with the work. You can easily -comply with the terms of this agreement by keeping this work in the -same format with its attached full Project Gutenberg-tm License when -you share it without charge with others. - -1.D. The copyright laws of the place where you are located also govern -what you can do with this work. Copyright laws in most countries are -in a constant state of change. If you are outside the United States, -check the laws of your country in addition to the terms of this -agreement before downloading, copying, displaying, performing, -distributing or creating derivative works based on this work or any -other Project Gutenberg-tm work. The Foundation makes no -representations concerning the copyright status of any work in any -country other than the United States. - -1.E. Unless you have removed all references to Project Gutenberg: - -1.E.1. The following sentence, with active links to, or other -immediate access to, the full Project Gutenberg-tm License must appear -prominently whenever any copy of a Project Gutenberg-tm work (any work -on which the phrase "Project Gutenberg" appears, or with which the -phrase "Project Gutenberg" is associated) is accessed, displayed, -performed, viewed, copied or distributed: - - This eBook is for the use of anyone anywhere in the United States and - most other parts of the world at no cost and with almost no - restrictions whatsoever. You may copy it, give it away or re-use it - under the terms of the Project Gutenberg License included with this - eBook or online at www.gutenberg.org. If you are not located in the - United States, you will have to check the laws of the country where - you are located before using this eBook. - -1.E.2. If an individual Project Gutenberg-tm electronic work is -derived from texts not protected by U.S. copyright law (does not -contain a notice indicating that it is posted with permission of the -copyright holder), the work can be copied and distributed to anyone in -the United States without paying any fees or charges. If you are -redistributing or providing access to a work with the phrase "Project -Gutenberg" associated with or appearing on the work, you must comply -either with the requirements of paragraphs 1.E.1 through 1.E.7 or -obtain permission for the use of the work and the Project Gutenberg-tm -trademark as set forth in paragraphs 1.E.8 or 1.E.9. - -1.E.3. If an individual Project Gutenberg-tm electronic work is posted -with the permission of the copyright holder, your use and distribution -must comply with both paragraphs 1.E.1 through 1.E.7 and any -additional terms imposed by the copyright holder. Additional terms -will be linked to the Project Gutenberg-tm License for all works -posted with the permission of the copyright holder found at the -beginning of this work. - -1.E.4. Do not unlink or detach or remove the full Project Gutenberg-tm -License terms from this work, or any files containing a part of this -work or any other work associated with Project Gutenberg-tm. - -1.E.5. Do not copy, display, perform, distribute or redistribute this -electronic work, or any part of this electronic work, without -prominently displaying the sentence set forth in paragraph 1.E.1 with -active links or immediate access to the full terms of the Project -Gutenberg-tm License. - -1.E.6. You may convert to and distribute this work in any binary, -compressed, marked up, nonproprietary or proprietary form, including -any word processing or hypertext form. However, if you provide access -to or distribute copies of a Project Gutenberg-tm work in a format -other than "Plain Vanilla ASCII" or other format used in the official -version posted on the official Project Gutenberg-tm website -(www.gutenberg.org), you must, at no additional cost, fee or expense -to the user, provide a copy, a means of exporting a copy, or a means -of obtaining a copy upon request, of the work in its original "Plain -Vanilla ASCII" or other form. Any alternate format must include the -full Project Gutenberg-tm License as specified in paragraph 1.E.1. - -1.E.7. Do not charge a fee for access to, viewing, displaying, -performing, copying or distributing any Project Gutenberg-tm works -unless you comply with paragraph 1.E.8 or 1.E.9. - -1.E.8. You may charge a reasonable fee for copies of or providing -access to or distributing Project Gutenberg-tm electronic works -provided that: - -* You pay a royalty fee of 20% of the gross profits you derive from - the use of Project Gutenberg-tm works calculated using the method - you already use to calculate your applicable taxes. The fee is owed - to the owner of the Project Gutenberg-tm trademark, but he has - agreed to donate royalties under this paragraph to the Project - Gutenberg Literary Archive Foundation. Royalty payments must be paid - within 60 days following each date on which you prepare (or are - legally required to prepare) your periodic tax returns. Royalty - payments should be clearly marked as such and sent to the Project - Gutenberg Literary Archive Foundation at the address specified in - Section 4, "Information about donations to the Project Gutenberg - Literary Archive Foundation." - -* You provide a full refund of any money paid by a user who notifies - you in writing (or by e-mail) within 30 days of receipt that s/he - does not agree to the terms of the full Project Gutenberg-tm - License. You must require such a user to return or destroy all - copies of the works possessed in a physical medium and discontinue - all use of and all access to other copies of Project Gutenberg-tm - works. - -* You provide, in accordance with paragraph 1.F.3, a full refund of - any money paid for a work or a replacement copy, if a defect in the - electronic work is discovered and reported to you within 90 days of - receipt of the work. - -* You comply with all other terms of this agreement for free - distribution of Project Gutenberg-tm works. - -1.E.9. If you wish to charge a fee or distribute a Project -Gutenberg-tm electronic work or group of works on different terms than -are set forth in this agreement, you must obtain permission in writing -from the Project Gutenberg Literary Archive Foundation, the manager of -the Project Gutenberg-tm trademark. Contact the Foundation as set -forth in Section 3 below. - -1.F. - -1.F.1. Project Gutenberg volunteers and employees expend considerable -effort to identify, do copyright research on, transcribe and proofread -works not protected by U.S. copyright law in creating the Project -Gutenberg-tm collection. Despite these efforts, Project Gutenberg-tm -electronic works, and the medium on which they may be stored, may -contain "Defects," such as, but not limited to, incomplete, inaccurate -or corrupt data, transcription errors, a copyright or other -intellectual property infringement, a defective or damaged disk or -other medium, a computer virus, or computer codes that damage or -cannot be read by your equipment. - -1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the "Right -of Replacement or Refund" described in paragraph 1.F.3, the Project -Gutenberg Literary Archive Foundation, the owner of the Project -Gutenberg-tm trademark, and any other party distributing a Project -Gutenberg-tm electronic work under this agreement, disclaim all -liability to you for damages, costs and expenses, including legal -fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT -LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE -PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE -TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE -LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR -INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH -DAMAGE. - -1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a -defect in this electronic work within 90 days of receiving it, you can -receive a refund of the money (if any) you paid for it by sending a -written explanation to the person you received the work from. If you -received the work on a physical medium, you must return the medium -with your written explanation. The person or entity that provided you -with the defective work may elect to provide a replacement copy in -lieu of a refund. If you received the work electronically, the person -or entity providing it to you may choose to give you a second -opportunity to receive the work electronically in lieu of a refund. If -the second copy is also defective, you may demand a refund in writing -without further opportunities to fix the problem. - -1.F.4. Except for the limited right of replacement or refund set forth -in paragraph 1.F.3, this work is provided to you 'AS-IS', WITH NO -OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT -LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE. - -1.F.5. Some states do not allow disclaimers of certain implied -warranties or the exclusion or limitation of certain types of -damages. If any disclaimer or limitation set forth in this agreement -violates the law of the state applicable to this agreement, the -agreement shall be interpreted to make the maximum disclaimer or -limitation permitted by the applicable state law. The invalidity or -unenforceability of any provision of this agreement shall not void the -remaining provisions. - -1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the -trademark owner, any agent or employee of the Foundation, anyone -providing copies of Project Gutenberg-tm electronic works in -accordance with this agreement, and any volunteers associated with the -production, promotion and distribution of Project Gutenberg-tm -electronic works, harmless from all liability, costs and expenses, -including legal fees, that arise directly or indirectly from any of -the following which you do or cause to occur: (a) distribution of this -or any Project Gutenberg-tm work, (b) alteration, modification, or -additions or deletions to any Project Gutenberg-tm work, and (c) any -Defect you cause. - -Section 2. Information about the Mission of Project Gutenberg-tm - -Project Gutenberg-tm is synonymous with the free distribution of -electronic works in formats readable by the widest variety of -computers including obsolete, old, middle-aged and new computers. It -exists because of the efforts of hundreds of volunteers and donations -from people in all walks of life. - -Volunteers and financial support to provide volunteers with the -assistance they need are critical to reaching Project Gutenberg-tm's -goals and ensuring that the Project Gutenberg-tm collection will -remain freely available for generations to come. In 2001, the Project -Gutenberg Literary Archive Foundation was created to provide a secure -and permanent future for Project Gutenberg-tm and future -generations. To learn more about the Project Gutenberg Literary -Archive Foundation and how your efforts and donations can help, see -Sections 3 and 4 and the Foundation information page at -www.gutenberg.org - -Section 3. Information about the Project Gutenberg Literary -Archive Foundation - -The Project Gutenberg Literary Archive Foundation is a non-profit -501(c)(3) educational corporation organized under the laws of the -state of Mississippi and granted tax exempt status by the Internal -Revenue Service. The Foundation's EIN or federal tax identification -number is 64-6221541. Contributions to the Project Gutenberg Literary -Archive Foundation are tax deductible to the full extent permitted by -U.S. federal laws and your state's laws. - -The Foundation's business office is located at 809 North 1500 West, -Salt Lake City, UT 84116, (801) 596-1887. Email contact links and up -to date contact information can be found at the Foundation's website -and official page at www.gutenberg.org/contact - -Section 4. Information about Donations to the Project Gutenberg -Literary Archive Foundation - -Project Gutenberg-tm depends upon and cannot survive without -widespread public support and donations to carry out its mission of -increasing the number of public domain and licensed works that can be -freely distributed in machine-readable form accessible by the widest -array of equipment including outdated equipment. Many small donations -($1 to $5,000) are particularly important to maintaining tax exempt -status with the IRS. - -The Foundation is committed to complying with the laws regulating -charities and charitable donations in all 50 states of the United -States. Compliance requirements are not uniform and it takes a -considerable effort, much paperwork and many fees to meet and keep up -with these requirements. We do not solicit donations in locations -where we have not received written confirmation of compliance. To SEND -DONATIONS or determine the status of compliance for any particular -state visit www.gutenberg.org/donate - -While we cannot and do not solicit contributions from states where we -have not met the solicitation requirements, we know of no prohibition -against accepting unsolicited donations from donors in such states who -approach us with offers to donate. - -International donations are gratefully accepted, but we cannot make -any statements concerning tax treatment of donations received from -outside the United States. U.S. laws alone swamp our small staff. - -Please check the Project Gutenberg web pages for current donation -methods and addresses. Donations are accepted in a number of other -ways including checks, online payments and credit card donations. To -donate, please visit: www.gutenberg.org/donate - -Section 5. General Information About Project Gutenberg-tm electronic works - -Professor Michael S. Hart was the originator of the Project -Gutenberg-tm concept of a library of electronic works that could be -freely shared with anyone. For forty years, he produced and -distributed Project Gutenberg-tm eBooks with only a loose network of -volunteer support. - -Project Gutenberg-tm eBooks are often created from several printed -editions, all of which are confirmed as not protected by copyright in -the U.S. unless a copyright notice is included. Thus, we do not -necessarily keep eBooks in compliance with any particular paper -edition. - -Most people start at our website which has the main PG search -facility: www.gutenberg.org - -This website includes information about Project Gutenberg-tm, -including how to make donations to the Project Gutenberg Literary -Archive Foundation, how to help produce our new eBooks, and how to -subscribe to our email newsletter to hear about new eBooks. diff --git a/old/69360-0.zip b/old/69360-0.zip Binary files differdeleted file mode 100644 index c741a69..0000000 --- a/old/69360-0.zip +++ /dev/null diff --git a/old/69360-h.zip b/old/69360-h.zip Binary files differdeleted file mode 100644 index d4f2506..0000000 --- a/old/69360-h.zip +++ /dev/null diff --git a/old/69360-h/69360-h.htm b/old/69360-h/69360-h.htm deleted file mode 100644 index f574960..0000000 --- a/old/69360-h/69360-h.htm +++ /dev/null @@ -1,2725 +0,0 @@ -<!DOCTYPE html> -<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> - <head> - <meta charset="UTF-8"> - <title> - The Project Gutenberg eBook of The steeple-jack’s instructor, by Clarence James Murray. - </title> - - <link rel="icon" href="images/cover.jpg" type="image/x-cover"> - - <style> - -a { - text-decoration: none; -} - -body { - margin-left: 10%; - margin-right: 10%; -} - -h1,h2 { - text-align: center; - clear: both; -} - -h2.nobreak { - page-break-before: avoid; -} - -hr.chap { - margin-top: 2em; - margin-bottom: 2em; - clear: both; - width: 65%; - margin-left: 17.5%; - margin-right: 17.5%; -} - -img.w100 { - width: 100%; -} - -div.chapter { - page-break-before: always; -} - -ul { - list-style-type: none; -} - -li { - margin-top: .5em; - padding-left: 2em; - text-indent: -2em; -} - -p { - margin-top: 0.5em; - text-align: justify; - margin-bottom: 0.5em; - text-indent: 1em; -} - -table { - margin: 1em auto 1em auto; - max-width: 40em; - border-collapse: collapse; -} - -td { - padding-left: 2.25em; - padding-right: 0.25em; - vertical-align: top; - text-indent: -2em; -} - -.tdpg { - vertical-align: bottom; - text-align: right; -} - -.box { - margin: auto; - max-width: 20em; - border: 2px solid black; - padding: 0.5em; -} - -.caption { - text-align: center; - margin-bottom: 1em; - font-size: 90%; - text-indent: 0em; -} - -.center { - text-align: center; - text-indent: 0em; -} - -.figcenter { - margin: auto; - text-align: center; -} - -.larger { - font-size: 150%; -} - -.pagenum { - position: absolute; - right: 4%; - font-size: smaller; - text-align: right; - font-style: normal; -} - -.smaller { - font-size: 80%; -} - -.titlepage { - text-align: center; - margin-top: 3em; - text-indent: 0em; -} - -.x-ebookmaker img { - max-width: 100%; - width: auto; - height: auto; -} - -/* Illustration classes */ -.illowp100 {width: 100%;} -.illowp21 {width: 21%;} -.x-ebookmaker .illowp21 {width: 100%;} -.illowp22 {width: 22%;} -.x-ebookmaker .illowp22 {width: 100%;} -.illowp26 {width: 26%;} -.x-ebookmaker .illowp26 {width: 100%;} -.illowp30 {width: 30%;} -.x-ebookmaker .illowp30 {width: 100%;} -.illowp34 {width: 34%;} -.x-ebookmaker .illowp34 {width: 100%;} -.illowp37 {width: 37%;} -.x-ebookmaker .illowp37 {width: 100%;} -.illowp40 {width: 40%;} -.x-ebookmaker .illowp40 {width: 100%;} -.illowp46 {width: 46%;} -.x-ebookmaker .illowp46 {width: 100%;} -.illowp48 {width: 48%;} -.x-ebookmaker .illowp48 {width: 100%;} -.illowp60 {width: 60%;} -.x-ebookmaker .illowp60 {width: 100%;} -.illowp75 {width: 75%;} -.x-ebookmaker .illowp75 {width: 100%;} -.illowp93 {width: 93%;} -.x-ebookmaker .illowp93 {width: 100%;} - </style> - </head> -<body> -<p style='text-align:center; font-size:1.2em; font-weight:bold'>The Project Gutenberg eBook of The steeple-jack's instructor, by Clarence James Murray</p> -<div style='display:block; margin:1em 0'> -This eBook is for the use of anyone anywhere in the United States and -most other parts of the world at no cost and with almost no restrictions -whatsoever. You may copy it, give it away or re-use it under the terms -of the Project Gutenberg License included with this eBook or online -at <a href="https://www.gutenberg.org">www.gutenberg.org</a>. If you -are not located in the United States, you will have to check the laws of the -country where you are located before using this eBook. -</div> - -<p style='display:block; margin-top:1em; margin-bottom:1em; margin-left:2em; text-indent:-2em'>Title: The steeple-jack's instructor</p> -<p style='display:block; margin-top:1em; margin-bottom:0; margin-left:2em; text-indent:-2em'>Author: Clarence James Murray</p> -<p style='display:block; text-indent:0; margin:1em 0'>Release Date: November 15, 2022 [eBook #69360]</p> -<p style='display:block; text-indent:0; margin:1em 0'>Language: English</p> - <p style='display:block; margin-top:1em; margin-bottom:0; margin-left:2em; text-indent:-2em; text-align:left'>Produced by: deaurider and the Online Distributed Proofreading Team at https://www.pgdp.net (This file was produced from images generously made available by The Internet Archive)</p> -<div style='margin-top:2em; margin-bottom:4em'>*** START OF THE PROJECT GUTENBERG EBOOK THE STEEPLE-JACK'S INSTRUCTOR ***</div> - -<p><span class="pagenum"><a id="Page_1"></a>[1]</span></p> - -<div class="figcenter illowp46" id="cover" style="max-width: 100em;"> - <img class="w100" src="images/cover.jpg" alt=""> - <p class="caption">The Steeple-Jack’s Instructor</p> - <p class="caption">The S. J. Lee Publishing Co. Chicago, U. S. A.</p> -</div> - -<p><span class="pagenum"><a id="Page_2"></a>[2]</span></p> - -<hr class="chap x-ebookmaker-drop"> - -<p><span class="pagenum"><a id="Page_3"></a>[3]</span></p> - -<h1><span class="smaller">THE</span><br> -STEEPLE-JACK’S<br> -INSTRUCTOR</h1> - -<div class="figcenter illowp75" id="tp-deco" style="max-width: 4.6875em;"> - <img class="w100" src="images/tp-deco.jpg" alt=""> -</div> - -<p class="center">Showing the Modern Methods Used<br> -by Successful Steeple-Jacks</p> - -<p class="center larger">Price $2.00</p> - -<p class="titlepage">By CLARENCE JAMES MURRAY</p> - -<p class="titlepage"><span class="smaller">Published by</span><br> -THE S. J. LEE PUBLISHING CO.<br> -<span class="smaller">160 NORTH WELLS STREET<br> -CHICAGO, U. S. A.</span></p> - -<p><span class="pagenum"><a id="Page_4"></a>[4]</span></p> - -<hr class="chap x-ebookmaker-drop"> - -<p><span class="pagenum"><a id="Page_5"></a>[5]</span></p> - -<div class="box"> - -<p class="center">Copyrighted 1921<br> -by<br> -The S. J. Lee Publishing Co.<br> -Chicago, U. S. A.</p> - -</div> - -<p><span class="pagenum"><a id="Page_6"></a>[6]</span></p> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_7"></a>[7]</span></p> - -<h2 class="nobreak">CONTENTS</h2> - -</div> - -<table> - <tr> - <td></td> - <td class="tdpg">Page</td> - </tr> - <tr> - <td>Introduction</td> - <td class="tdpg"><a href="#How_to_Become_a_Steeple-Jack">9</a></td> - </tr> - <tr> - <td>How to Become a Steeple-Jack</td> - <td class="tdpg"><a href="#How_to_Become_a_Steeple-Jack">9</a></td> - </tr> - <tr> - <td>The Smokestack</td> - <td class="tdpg"><a href="#THE_SMOKESTACK">16</a></td> - </tr> - <tr> - <td>To Rig a Stack Without a Gimblet Wire</td> - <td class="tdpg"><a href="#TO_RIG_A_STACK_WITHOUT_A_GIMBLET_WIRE">31</a></td> - </tr> - <tr> - <td>How to Change the Riggings</td> - <td class="tdpg"><a href="#HOW_TO_CHANGE_THE_RIGGINGS">39</a></td> - </tr> - <tr> - <td>Steel Stacks with Brick Lining</td> - <td class="tdpg"><a href="#STEEL_STACKS_WITH_BRICK_LINING">40</a></td> - </tr> - <tr> - <td>Smokestacks with Ladders</td> - <td class="tdpg"><a href="#SMOKESTACKS_WITH_LADDERS">42</a></td> - </tr> - <tr> - <td>Steel Stacks Decay at Band</td> - <td class="tdpg"><a href="#STEEL_STACKS_DECAY_AT_BAND">43</a></td> - </tr> - <tr> - <td>Reguying</td> - <td class="tdpg"><a href="#REGUYING">44</a></td> - </tr> - <tr> - <td>Tripping the Riggings</td> - <td class="tdpg"><a href="#TRIPPING_THE_RIGGINGS">50</a></td> - </tr> - <tr> - <td>Self-supporters</td> - <td class="tdpg"><a href="#SELF-SUPPORTERS">55</a></td> - </tr> - <tr> - <td>Knots</td> - <td class="tdpg"><a href="#KNOTS">58</a><span class="pagenum"><a id="Page_8"></a>[8]</span></td> - </tr> - <tr> - <td>Square Knot</td> - <td class="tdpg"><a href="#SQUARE_KNOT">60</a></td> - </tr> - <tr> - <td>Bow-line Knot</td> - <td class="tdpg"><a href="#BOW-LINE">62</a></td> - </tr> - <tr> - <td>Half-hitches</td> - <td class="tdpg"><a href="#HALF_HITCHES">64</a></td> - </tr> - <tr> - <td>The Black Wall</td> - <td class="tdpg"><a href="#THE_BLACK_WALL">66</a></td> - </tr> - <tr> - <td>Tanks, Towers and Standpipes</td> - <td class="tdpg"><a href="#TANKS_TOWERS_AND_STANDPIPES">67</a></td> - </tr> - <tr> - <td>Standpipes</td> - <td class="tdpg"><a href="#Page_69">69</a></td> - </tr> - <tr> - <td>Water Towers</td> - <td class="tdpg"><a href="#WATER_TOWERS">71</a></td> - </tr> - <tr> - <td>Church Spires</td> - <td class="tdpg"><a href="#CHURCH_SPIRES">74</a></td> - </tr> - <tr> - <td>The Flagstaff</td> - <td class="tdpg"><a href="#THE_FLAGSTAFF">78</a></td> - </tr> - <tr> - <td>Tops of Poles</td> - <td class="tdpg"><a href="#TOP_OF_POLES">85</a></td> - </tr> - <tr> - <td>Names of Knots, Bends, Bights and Hitches</td> - <td class="tdpg"><a href="#NAMES_OF_KNOTS_BENDS_BIGHTS_AND_HITCHES">93</a></td> - </tr> -</table> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_9"></a>[9]</span></p> - -<h2 class="nobreak" id="How_to_Become_a_Steeple-Jack">How to Become a Steeple-Jack</h2> - -</div> - -<p>In this book I am placing before you -the secrets of a trade I have followed for -fourteen years. I have made as high as -$170 a day. It is a poor Steeple-Jack who -cannot make at least $25 a day. If you -have the ability, the appearance, and can -approach a business man, you need not -worry about getting his work.</p> - -<p>He is aware of the chances you are -taking. He has work that must be done, -and has an admiration for the man with -nerve enough to accomplish what he -would not undertake himself.</p> - -<p>Steeple-Jacks are always in demand. -When I speak of Steeple-Jacks, I refer to -men who comprehend that a certain thing -up in the air needs attention, whether it -is the reaving of halyards on a flagpole, -the adjustment of a cross on a steeple, the -replacing of a guy wire on a stack, the -repairing of the hands of a clock on a -tower, or the mere painting of any of<span class="pagenum"><a id="Page_10"></a>[10]</span> -these lofty objects which ordinary -workmen are not courageous enough to -attempt.</p> - -<p>I know a great deal of this fascinating -game, but I do not want to convey to -you the thought that I know it ALL, for -that is not the truth. Bear in mind the -old adage: “We are never too old to -learn.”</p> - -<p>I call this work a game, because it -appeals to me as a great game, although -it is difficult work. People will gather -in crowds on the street to watch a -Steeple-Jack at his perilous duty. I use -the word “perilous” because that is what -it would look like to the man on the sidewalk, -but to one in the air it is just a trick -to the trade, and he would not exchange -places with the man who is so eagerly -watching every move he makes for fear -that he may make a wrong move.</p> - -<p>While he is thus busily engaged watching -you, the following questions run thru -his mind: “How in the world did he -ever get up there?” “How can he stay -up there so long?” His thoughts finally<span class="pagenum"><a id="Page_11"></a>[11]</span> -run something like this: “My, but he -certainly is brave.”</p> - -<p>From my experience with Steeple-Jacks -I am convinced that they never like -to be called “brave,” because stunts that -are pulled are all in the game, and it is no -more dangerous for a Steeple-Jack to -climb to the top of a flagpole or smokestack -than for the individual to ride in an -elevator, a motor car or train, for when -we consider the number of people who are -trusting to the safety of the above mentioned -conveyances, and the proportion of -accidents in comparison to the number -of Steeple-Jacks and the accidents in connection -with this trade, the Steeple-Jacks -are not at a disadvantage in respect to -casualties.</p> - -<p>It is to the credit of the Steeple-Jack, -however, that he is less careless regarding -the dangers of his profession than the -thoughtless traveling public.</p> - -<p>The Steeple-Jack considers it no more -irksome to go out on a job than the book-keeper -to go to his desk or a bank teller -to enter his cage. The only difference<span class="pagenum"><a id="Page_12"></a>[12]</span> -between the Steeple-Jack and the book-keeper -or bank teller is in regard to -working hours. The Steeple-Jack’s hours -range from two to four a day, while those -of the tradesman are from six to ten -hours a day. The Steeple-Jack, whose -day comprises about four hours (often -less and seldom more) makes <b>more</b> money -in his <b>day</b> than the average man makes -in a <b>week</b>.</p> - -<p>As before stated, I have had considerable -experience in the line about which -I write, and I therefore feel safe in saying -that no man is worthy of the title of -Steeple-Jack unless he can make at least -$20 a day in days when he chooses to -work less than the customary two to four -hours.</p> - -<p>From my past experiences I have come -to the conclusion that “time is money,” -and therefore my advice to any man who -entertains the idea of going into the great -game of a Steeple-Jack is to always bear -that slogan in mind and never perform -for the audience which you will undoubtedly -have watching you from the street.<span class="pagenum"><a id="Page_13"></a>[13]</span> -Remember it is <b>your</b> time that is being -taken up by the performance of whatever -daring stunts you may be able to “show -off,” and no matter how large an audience -you may have, there are no benefits derived -therefrom.</p> - -<p>The work of a Steeple-Jack has a great -many assets besides that of being able to -earn a great amount of money. With the -exception of the money question, here are -two that will appeal to every man: First, -it is healthful work, because you are -always in the open air. Second, you have -no boss. You are your own boss and may -come and go when you please. However, -I would not advise any man who is following -this work to assume too great an -air of independence. We all concede that -it helps to be a <b>little</b> independent at times, -but always bear in mind that it is the -privilege of the “other fellow” to assume -an air of independence also, and, after all, -YOU are dependent upon his work. By -that I do not mean just one individual, -but I am taking your trade as a whole.<span class="pagenum"><a id="Page_14"></a>[14]</span> -In business we must give and take. Remember -that.</p> - -<p>The Steeple-Jack’s work is ordinarily -performed on smokestacks, flagpoles and -church spires. You will agree with me -that there are very few who follow this -line of work. Just to prove this to you, -allow me to ask you a question: “How -many Steeple-Jacks do you know?” Perhaps -the answer will be “One,” “Two,” -or “Three,” and, again, it may be “Not -any.” I have worked in this business in -every large city in the United States and -I can candidly say that I have had very -little competition and, in a great many -cities, not any.</p> - -<p>Another important factor of this work -is always to endeavor to please the man -whose work you are doing and never to -do cheap or skimpy work, for I have been -convinced that cheap and skimpy workmanship -gains nothing for you. However, -on the other hand, if you put forth -your best and succeed in pleasing the man -who is to be considered, you can always -count on a renewed order the following<span class="pagenum"><a id="Page_15"></a>[15]</span> -year. REMEMBER: Satisfy the other -fellow first and you cannot help but satisfy -yourself.</p> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_16"></a>[16]</span></p> - -<h2 class="nobreak" id="THE_SMOKESTACK">THE SMOKESTACK</h2> - -</div> - -<p>To a Steeple-Jack any stack, regardless -of whether it is composed of brick, -steel or concrete, is a smokestack. Undoubtedly -you have heard these stacks -referred to as chimneys; nevertheless, -from now on we will call them smokestacks.</p> - -<p>Steel smokestacks are supported by guy -wires. As a general rule two sets of guy -wires support a steel stack, but I have -often found a smokestack supported by -three sets of guy wires. These guy wires -consist of four wires to a set.</p> - -<p>There is supposed to be a wire which -runs through a sheave from the top of the -stock to enable the stack man to rig up. -This wire is flexible and is called a gimblet -wire. Above all things, do not use -this gimblet wire for ascending purposes; -by that I mean in such a manner as to -cause the weight of your body to rest -upon this wire, as there is often great -danger in an act of this kind.</p> - -<p>Read carefully the following few lines<span class="pagenum"><a id="Page_17"></a>[17]</span> -and you will be convinced of the risk you -are taking by endeavoring to ascend on -the gimblet wire.</p> - -<p>If the gimblet wire in question has been -in that position for a year, in all probability -it is rotten at the point where it -runs through the hook at the top of the -stack, and it would not take much weight -to loosen it. So bear in mind, no matter -how light or heavy in weight you may -be, do not climb up on the gimblet wire.</p> - -<p>The following is a more simple and far -more safe way of getting to the top:</p> - -<p>First of all, get a board from six to -nine feet in length and two to three inches -in depth. Take one end of the gimblet -wire and tie it to the end of your board, -and fasten the other end of the wire to -the board about three feet from the end. -Take your stack hook—a hook of good -⅝-inch steel. This hook should be about -fourteen inches long, the hook being six -inches long; a five-inch opening with an -eye opening of about two inches, so that -you can hook your block and tackle to it. -Attach your stack hook to the board on -the side opposite to where your gimblet -wire is fastened. Be sure the hook is -turned towards the stack.</p> - -<p><span class="pagenum"><a id="Page_18"></a>[18]</span></p> - -<div class="figcenter illowp60" id="illus01" style="max-width: 25em;"> - <img class="w100" src="images/illus01.jpg" alt=""> - <p class="caption">Ready to Pull the Rigging Up</p> -</div> - -<div class="figcenter illowp93" id="illus02" style="max-width: 31.25em;"> - <img class="w100" src="images/illus02.jpg" alt=""> - <p class="caption">The Boatswain Chair</p> -</div> - -<p><span class="pagenum"><a id="Page_19"></a>[19]</span></p> - -<p>When this is done, pull on the wire; -that will draw up your riggings, reaving -your block and falls out to the size of the -stack, so as to enable you to keep them -from twisting with the gimblet wire. -Now, then, should this board be weak -and break while you have your riggings -near the top, to prevent them from falling -down and one end of the gimblet wire -from running to the top, tie a heavy piece -of cord to the end of the gimblet wire, -running it to the other end of the wire, -then fasten to your blocks.</p> - -<p>This will prevent a hard day’s work -untangling your riggings from the guy -wires, should the board break.</p> - -<p><span class="pagenum"><a id="Page_20"></a>[20]</span></p> - -<div class="figcenter illowp21" id="illus03" style="max-width: 12.5em;"> - <img class="w100" src="images/illus03.jpg" alt=""> - <p class="caption">Tripping Riggings on Top of Stack</p> -</div> - -<p>After drawing your rigging to the top, -the board drawn tight up to the block on -top of the stack, pull on the gimblet wire -that is attached to the end of the board. -This motion brings the end of your board -bearing the hook and rigging up. In -some cases, the stack being small in diameter<span class="pagenum"><a id="Page_21"></a>[21]</span> -and the board being too long, the -hook will stick far out from the stack, -and with all hard efforts will not lodge it -over the top. When you have this proposition -to contend with, leave the stack -about three or four inches on the gimblet -wire that holds the board tight to the -block on the stack. In some cases you -have to drop the board as far as from -two to three feet below the block, in -order to get your hook in a position -where it will settle over the top of the -stack with the hooked part inside of the -stack.</p> - -<p>This is very important. Be sure that -the hook is not only setting on top. This -can be determined by twisting all four -lines, making them one bundle; then by -giving the lines a few switchings back -and forth in all directions. When this is -done and you have fully convinced yourself -that the hook is properly over the top, -then your next move is to start for the -top.</p> - -<p>If it is your first time in a boatswain -chair, I would suggest that you sound<span class="pagenum"><a id="Page_22"></a>[22]</span> -yourself first as to dizziness. This can -very easily be done by the following -method:</p> - -<p>Stand along the side of the stack, -throwing your head to one side and looking -up, allowing your eyes to follow the -stack and the clouds, shaking the head at -different times. This brings on dizziness. -Then stand erect, so as to clear your head. -After getting into the boatswain chair, -you place the fall line of your riggings—that -is, the line with which you draw -yourself up—between your legs. This -enables you and your helper to pull more -steadily together, and you get to the top -much quicker.</p> - -<p>I have noticed that the majority of -stack men regard this as the most difficult -part of the job—drawing to the top. -Once up, the job is half done.</p> - -<p>After you reach the top of the stack, -the first thing to be done is to cut away -the string that holds the stack hook to -the board. You then lower the board -to the ground. Still tied by the wire to -the board for further use in case you want<span class="pagenum"><a id="Page_23"></a>[23]</span> -to trip off with it when the job is finished.</p> - -<p>There is still an easier way, which I -will explain later. Now we will say the -work you are to do is paint. For your -information I will say that oil paint is -preferred by Steeple-Jacks for several reasons, -some of which are: It is easy to -apply in all kinds of weather; you are -bound to get plenty of it in the face, and -it is easier to wash off than tar. From -my personal experience I have found that -graphite and oil preserve a steel smokestack -better than any other. You will -come in contact with people who will differ -with you as to this point; however, -when you meet with a difficulty of this -nature, give the man what he asks for. -If he wants water, give him water; if he -desires to have tar, give it to him, but if -he wants something good, then suggest -an oil paint. Graphite and oil—the preservable.</p> - -<p>A great number of men with whom you -deal will say: “I want tar on my stack.” -I have learned from my own personal -experience that the answer which will in<span class="pagenum"><a id="Page_24"></a>[24]</span> -nine cases out of ten take with the man -with whom you are dealing is something -on this order: “If you want tar, all right, -but it will cost you <b>more</b> money.” He -will immediately confront you with a -question similar to this: “Why is that?” -Your reply should be: “If I put tar on -your smokestack and come back next year -for your work, you will refuse me, because -tar blisters in places and rust forms under -the blisters, which prevent the rust from -being seen, and in a few years there are -holes in the stack, whereas an oil paint -wears off, showing the rust spots.”</p> - -<p><span class="pagenum"><a id="Page_25"></a>[25]</span></p> - -<div class="figcenter illowp21" id="illus04" style="max-width: 12.5em;"> - <img class="w100" src="images/illus04.jpg" alt=""> - <p class="caption">Changing Positions on Top of Stack</p> -</div> - -<p>However, I am running away from my -story. We will go back to the top of the -stack. You look down, getting straight -above a guy wire, reach over as far as you -can and paint, leaving the space directly -in front clear; drop down about ten feet, -painting as you go; draw up to the top -again, switching the stack hook over and -directly above the next nearest guy wire. -In order to accomplish this, take an extra -hook similar to your stack hook and -about seven feet of ½-inch line. Place<span class="pagenum"><a id="Page_26"></a>[26]</span> -the extra hook over the top; tie the other -end of the sling to the rope of your boatswain -chair, making it good and secure. -Then lower your weight from your rigging -until it rests on the extra hook and -sling. You then draw your regular stack -hook up to the extra hook. When this is -done you pull your weight again to your -riggings and push the extra hook around. -Do this until you get to the position you -want, just above the next nearest guy -wire, repeating the same as you did above -the other guy wire, painting about ten -feet down. When this is done, draw back -to the top, using the same method to get -over to the middle of the two spaces you -have painted.</p> - -<p>Then start to paint between the two -spaces already completed. By so doing -you are able to make a larger sweep on -your way down. In order to make time -on a stack it pays to have a helper on -the ground, so as to take the end of the -fall line or handy line and pull you around -and by doing this also help to keep you -in to the stack, which enables one to work<span class="pagenum"><a id="Page_27"></a>[27]</span> -to a better advantage and much quicker. -Remember, “Time is money,” and there -is lots of it to be made.</p> - -<p>The opportunity is there. Tradesmen -of all walks of life say: “Gee, business is -dull in my trade. If I only had the opportunity -that some people have.” A -Steeple-Jack should never say that, because -there is always work to be done on -a smokestack the year ’round. Don’t be -afraid to ask for it, and also a price. -Yours is not a common trade. It takes -brains, brawn and nerve, so don’t permit -your nerve to fail you when you are -asking a price.</p> - -<p>Another thing to be careful of is not -to allow your rope to get caught and -tangled in the end of a guy wire attached -to the stack at the band. Should this -happen, it may put you in a very hazardous -position. Give this a glance now and -then and, should such a thing happen, do -not get excited and start tugging. The -more you tug, the tighter it gets. Have -someone to switch it out from the ground. -It is possible to do this from the air.</p> - -<p><span class="pagenum"><a id="Page_28"></a>[28]</span></p> - -<div class="figcenter illowp34" id="illus05" style="max-width: 20.3125em;"> - <img class="w100" src="images/illus05.jpg" alt=""> - <p class="caption">Showing Falls Caught in Guy Wire</p> -</div> - -<p><span class="pagenum"><a id="Page_29"></a>[29]</span></p> - -<p>High wind is the Steeple-Jack’s greatest -enemy. It is only a fool who would -attempt to rig a smokestack when the -wind is blowing a gale; in fact, it is almost -impossible to work in a high wind. More -work can be accomplished in one-fifth of -the time on a calm day. “Time is -money,” but always take time when your -life is at stake. Always keep in mind the -motto: “Safety First.”</p> - -<p>When tying up your riggings for the -night, and it might be calm at the close -of the day. Weather changes in a very -few minutes at times. To safeguard -against the rope from wearing against -the stack and guy wires, walk out about -fifteen feet from the stack, taking a piece -of extra sling. Tie the sling to some -object that is solid, throw two half-hitches -with your fall line around the riggings -just above the single block. When this -is done, pass the sling which you have -tied to some object through the hook of -the block, making it fastened to the block. -Then pull the slack out of your riggings -with the fall line, at the same time keeping<span class="pagenum"><a id="Page_30"></a>[30]</span> -the two half-hitches just above the -block. Do not take up all the slack; leave -some play in your lines, using your own -judgment as to whether the lines will -come in contact with the guy wires. The -weather will shrink the line more or less.</p> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_31"></a>[31]</span></p> - -<h2 class="nobreak" id="TO_RIG_A_STACK_WITHOUT_A_GIMBLET_WIRE">TO RIG A STACK WITHOUT A GIMBLET WIRE</h2> - -</div> - -<p>When this proposition confronts you -it may look to you like a job not worth -fooling with. It can be done and, on -some stacks, almost as quickly as with -a gimblet wire.</p> - -<p>There are a number of ways to rig -without the aid of a gimblet, of which I -will show you two of the quickest and -most simple.</p> - -<p>Look over your guy wires and pick out -the most solid of the lot running to the -top band. Make sure of its anchorage. -There are supposed to be two clips at -each end of a guy wire where it is connected -to the turn-buckle, and at the band -place the double block without the stack -hook on the guy wire.</p> - -<p>Tie a long and heavy line to the block. -Take this line, passing it around all the -guy wires with the exception of the one -the block and falls are attached to. Then -reave out your line to what you would -figure the length of the stack to be.<span class="pagenum"><a id="Page_32"></a>[32]</span> -You then take hold of the line that is -around the guys, pulling on it and at the -same time switching on your rigging. -Unless the guy wire is slanting at about -45 degrees down, your rigging will slide -up very easily.</p> - -<p>With this system it is possible to get -your rigging to within a very few feet -of the top band, then tie off your tug line, -be sure to some object that is good and -solid. Remember your weight will be -on that, and also your life.</p> - -<p>SAFETY FIRST always. You only -fall once. Use every safety device available. -Remember this book only tells you -how to rig, but it takes common sense -while following these methods, and that -is, take no chances where you <b>think</b> a -thing will hold. Be <b>sure</b> it holds.</p> - -<p>The first thing to do when getting into -the boatswain chair is to see that your -lines are not twisted. Have your helper -walk out some fifteen or twenty feet from -the stack. Take the fall line with you -on your way up. The stack hook, extra<span class="pagenum"><a id="Page_33"></a>[33]</span> -hook, sling string, small stick, hang line, -and you are ready.</p> - -<p>Quite a load going up! After placing -the line between your legs and your -helper stands away out, this helps to avoid -the twisting of your line. While going -up remember this: A very steady pull, -the two pulling together. Long grabs -and jerks are liable to prove disastrous, -as it may cause the line to snap. Half-inch -line has tremendous straining power; -nevertheless, there are flaws in rope and -rope also rots.</p> - -<p>My first experience on a stack I remember -I wanted to buy 1½-inch line. Now -wouldn’t I have had a wonderful time -trying to get that ton of rope to the top -of a smokestack! Since then I have used -¼-inch rope, but that is too small. At -any rate I had the correct idea of “Safety -First” at the beginning. However, ½-inch -is the proper size for a job not over -two hundred (200) feet high.</p> - -<p>Now, when nearing the top guy wire, -have your helper slack up, allowing you -to continue the pull alone. When the two<span class="pagenum"><a id="Page_34"></a>[34]</span> -blocks are together tie a safety line to the -wire. Tie the extra hook to the stick and -the end of the sling to your chair, then -in the hook, passing the hook over and -in the eye of the band. Pull the stick -away from the hook. You then tie the -stick to the block attached to the guy -wire. After this is done, lower yourself -until your weight rests on the line hooked -in at the band.</p> - -<p>Make sure when lifting the riggings -away from the wire that they don’t fall, -leaving you up there in a great predicament. -If this should happen, you will -agree with me on that point.</p> - -<p>Experience is a great teacher. I have -had this experience: On lifting the block -away from the wire, place it in the eye -of the band; also draw yourself up close -to the band. Untie the sling, tying it -closer to the hook, then draw up a long -pole—the size you figure you will need -to reach the top with. Tie the stack hook -to the pole; put the block and falls in the -hook; push it to the top.</p> - -<p><span class="pagenum"><a id="Page_35"></a>[35]</span></p> - -<div class="figcenter illowp34" id="illus06" style="max-width: 20.3125em;"> - <img class="w100" src="images/illus06.jpg" alt=""> - <p class="caption">Poling to the Top of a Smokestack</p> -</div> - -<p><span class="pagenum"><a id="Page_36"></a>[36]</span></p> - -<p>Now, not in all cases is this as easy to -do as to say. If the top is only fifteen or -twenty feet from the band, it can be done -without much effort, but should it be a -reach of thirty or thirty-five feet, I would -suggest the following method:</p> - -<p>Tie a hook to the pole just so it will -stay on. A light hook is required for this. -Place your handy line through the eye of -the hook. Tie the handy line end down -about eight feet from the top of the pole, -then lash yourself to the band, pull yourself -up and stand in the chair, throwing -one leg over the guy wire. Make yourself -good and solid, spread your feet out in -the chair. Do not have them together. -This sometimes prevents the chair from -sliding to one side. Above all remember -never to let your riggings get away from -you. You are in a mighty tiresome position. -Always be sure to have a handy line -with you in making a reach of thirty or -thirty-five feet. Figure your pole, which -is only two by two or so, is easily broken -in a little wind. I have had poles break -eight or ten times before reaching the top -of a stack.</p> - -<p><span class="pagenum"><a id="Page_37"></a>[37]</span></p> - -<p>Now, in pushing the pole up with a -handy line, always wait until the wind -ceases for a second, then up with it. This -has to be done quickly. With the pole -leaning against the stack once over the -top, pull the pole away from the light -hook, lower the pole until the top end is -at the band. Tie on the hook and block, -then, with the handy line now over the -top, pull on it and at the same time push -on the pole with a steady push and pull. -The rest is very simple. After this is -accomplished, undo yourself from the -band, lowering yourself into the boatswain -chair. Hook up the riggings to -the chair, start for the top, cut away the -pole, lower it down and start your work.</p> - -<p><span class="pagenum"><a id="Page_38"></a>[38]</span></p> - -<div class="figcenter illowp48" id="illus07" style="max-width: 28.125em;"> - <img class="w100" src="images/illus07.jpg" alt=""> - <p class="caption">Climbing Guy Wire with Slings and Chair</p> -</div> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_39"></a>[39]</span></p> - -<h2 class="nobreak" id="HOW_TO_CHANGE_THE_RIGGINGS">HOW TO CHANGE THE RIGGINGS</h2> - -</div> - -<p>When completing one side of a stack -and in order to get the tackle to another -position on the stack, twist the rope, making -it all in one; then leave a little slack -to make a snake whip movement towards -the top, and you will have the satisfaction -of seeing your rigging move around on -the top. If the wind is blowing hard, perhaps -you will have to do several of the -switching movements before getting the -hook to start to move. Then take the line -around the guy wire and you are ready -for the next set.</p> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_40"></a>[40]</span></p> - -<h2 class="nobreak" id="STEEL_STACKS_WITH_BRICK_LINING">STEEL STACKS WITH BRICK LINING</h2> - -</div> - -<p>You will encounter a little difficulty in -the shifting of your riggings from the -ground when you are working on steel -stacks with brick linings. In fact, you -will save time by not trying to shift from -the ground. If the brick extends all the -way to the top, you will have to have a -hook large enough to spread over the -steel and brick.</p> - -<p>It is wise to go to the top, whether you -have to tow it over fresh paint or not. In -doing this you have your helper walk out -some fifteen or twenty feet. You then -place your legs around the fall line; after -this is done both you and your helper pull -together.</p> - -<p>In this movement you are going up -backwards with your back towards the -stack, until about half way up; then turn -with your face towards the stack. Daub -the tips of your shoes with paint; this -helps to cover up the prints of your shoes -on the fresh paint. If you do not comply<span class="pagenum"><a id="Page_41"></a>[41]</span> -with this rule, the print of your shoes on -the fresh paint will look from the ground -as if those spots had never been painted, -and would tend to leave a bad impression -as to your workmanship with the man for -whom you are doing this work. Neat and -impressive work draws more returns. On -reaching the top an equal size hook is -required, as aforesaid, with the sling, -afterward having your helper take the fall -line over the guy wires and you are ready -to do another set.</p> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_42"></a>[42]</span></p> - -<h2 class="nobreak" id="SMOKESTACKS_WITH_LADDERS">SMOKESTACKS WITH LADDERS</h2> - -</div> - -<p>There is no use of going into detail -about rigging a stack that has a ladder -on it. This can be answered in a very few -words: Walk up the ladder and hook the -rigging over the top. But there is this -much about it—Watch your step! These -ladders after a few years become very -rusty and the bolts where connected from -the inside are sometimes eaten away by -the gas from the coal, and just a little -weight on them might cause the handles -to give way. So always remember to be -very careful when climbing a smokestack -that has a ladder connected to it.</p> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_43"></a>[43]</span></p> - -<h2 class="nobreak" id="STEEL_STACKS_DECAY_AT_BAND">STEEL STACKS DECAY AT BAND</h2> - -</div> - -<p>You will notice that as a general rule -steel stacks commence to weaken at the -first half-dozen sections from the top -downward, or at the band. The rain -hitting the in- and outside from the top, -and lying around the band, is causing the -rust to form more quickly than on any -other part of the stack. This accounts -for the aforesaid parts weakening the -quickest.</p> - -<p>It is always wise to sound a stack at -the top and band so as to determine -whether it will stand much tugging or -bouncing upon. If it looks weak and you -make up your mind that you will go -through with what you are doing, I would -suggest that you do all the pulling and -take just what tools you can possibly get -along with.</p> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_44"></a>[44]</span></p> - -<h2 class="nobreak" id="REGUYING">REGUYING</h2> - -</div> - -<p>To reguy a smokestack it is necessary -to have these parts before the job is really -called complete: Turn-buckles for the -bottom ends of the guys and clips for both -ends. Although you can guy a smokestack -without these articles, it is best to -have them. Without the aid of the turn-buckle -to draw the slack out of the guy -wires, a device like this can be used: -Lash the guy wire with a sling, using two -half-hitches so as to grip the wire. Tie -a bow-line knot at the opposite end so as -to enable you to attach the block and -fall, placing the opposite block in the eye -of the guy wire anchor, then by pulling -on the fall line, this takes the slack from -the wire, even with the turn-buckles. -Sometime you will have to resort to this -method in order to take up the loose -slack.</p> - -<p><span class="pagenum"><a id="Page_45"></a>[45]</span></p> - -<div class="figcenter illowp100" id="illus08" style="max-width: 43.75em;"> - <img class="w100" src="images/illus08.jpg" alt=""> - <p class="caption">Drawing Guy Wire Tight with Block and Falls</p> -</div> - -<p>When guying a stack the first thing to -do is to place the spool that holds the -wire between two boxes of equal size. -Take your handy line and a small single<span class="pagenum"><a id="Page_46"></a>[46]</span> -block when going up to attach the guys; -hook this single block to the eye of the -band at the position where you are to -work; have your helper tie the handy line -about three feet down from the end of -the guy wire, and then bend the wire -double. You then have your helper do -the pulling up of the guy wire. Should -you do the pulling while sitting in the -chair, you would soon notice the strain -from it in the stomach. As you have -nothing under the feet to press the strain -there, it really falls to the stomach to -receive all the hard work. Always leave -some slack to the guy wire.</p> - -<p>A stack must vibrate to a certain extent, -therefore if the guy wires are drawn -as tight as they possibly can be, the -chances are the result would be a broken -wire or an anchor giving way.</p> - -<p><span class="pagenum"><a id="Page_47"></a>[47]</span></p> - -<div class="figcenter illowp48" id="illus09" style="max-width: 28.125em;"> - <img class="w100" src="images/illus09.jpg" alt=""> - <p class="caption">Helper Pulling Guy Wire Up to Stack Band</p> -</div> - -<p>In using clips to fasten the wire at both -ends, they should be a size larger than -the guy wire, and when clips are not available, -allow about two feet over. After -passing guy wires through the eye of the -band or the eye of the anchor, take a piece<span class="pagenum"><a id="Page_48"></a>[48]</span> -of gas pipe of a size that will slip down -over the guy wire some foot or a foot and -a half, then twist the end of the guy wire -with the gas pipe around the other part -of wire that extends down. This is a -wonderful way to fasten the wire to the -stack, and will last as long as the stack -will.</p> - -<p><span class="pagenum"><a id="Page_49"></a>[49]</span></p> - -<div class="figcenter illowp40" id="illus10" style="max-width: 23.4375em;"> - <img class="w100" src="images/illus10.jpg" alt=""> - <p class="caption">Turning Guy Wire with Steel Pipe</p> -</div> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_50"></a>[50]</span></p> - -<h2 class="nobreak" id="TRIPPING_THE_RIGGINGS">TRIPPING THE RIGGINGS</h2> - -</div> - -<p>Tripping the riggings off the stack -after the job is completed takes only the -work of a few minutes. See to it before -making the last trip up that you have that -necessary appliance with which to save -you a few unnecessary trips up and down.</p> - -<p>Take a small steel bar about ¼-inch -in size and bend it into the shape of the -letter S. Judge the diameter of the band -on top of the stack; make the hook so it -will fit snugly on top. This hook should -not be over five inches long. After placing -the trip hook on the stack, take your -handy line, lay it on the hook, tie the end -of your line in the eye of your stack hook, -then tie up about two inches above the -eye in several places. The last two tie-offs -will prevent the stack hook from falling -to one side.</p> - -<p><span class="pagenum"><a id="Page_51"></a>[51]</span></p> - -<div class="figcenter illowp21" id="illus11" style="max-width: 12.5em;"> - <img class="w100" src="images/illus11.jpg" alt=""> - <p class="caption">Handy Line Attached from S Hook to Stack Hook</p> -</div> - -<p><span class="pagenum"><a id="Page_52"></a>[52]</span></p> - -<div class="figcenter illowp21" id="illus12" style="max-width: 12.5em;"> - <img class="w100" src="images/illus12.jpg" alt=""> - <p class="caption">Results of Turning Hook in Wrong Direction</p> -</div> - -<p><span class="pagenum"><a id="Page_53"></a>[53]</span></p> - -<div class="figcenter illowp21" id="illus13" style="max-width: 12.5em;"> - <img class="w100" src="images/illus13.jpg" alt=""> - <p class="caption">Hook Turned in Proper Direction for Tripping</p> -</div> - -<p><span class="pagenum"><a id="Page_54"></a>[54]</span></p> - -<p>After leaving the stack, have your -helper tie the handy line away from the -stack. This flopping back and forth will -annoy you while at work. After you have -finished and are ready to trip, twist the -rigging until it is twisted all the way to -the top. In doing this twist the rope so -that the stack hook will turn out and -away from the trip hook. This is important. -Leave slack on the riggings at the -same time. Do not let it untwist. Then -take the trip line, pull steady on it, until -you see the stack hook raise up and over -the stack. Then lower on the trip line -until you see the stack hook is off and -below the top of the stack. Then let go -of the riggings so they will untwist; lower -away; untie the handy line from the block -hook; then pull one end of the handy line -to the top. It will go through the small -S up there and fall to the ground, leaving -the small S hook on top of the stack.</p> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_55"></a>[55]</span></p> - -<h2 class="nobreak" id="SELF-SUPPORTERS">SELF-SUPPORTERS</h2> - -</div> - -<p>Steel smokestacks are generally supported -by guy wires, although there are -some steel stacks without guy wires, -which are called self-supporters.</p> - -<p>Self-supporters taper at the base and -have an extra heavy foundation and a -ladder to enable you to climb to the top, -although in my travels I have come in -contact with one self-supporter that had -neither ladder nor gimblet wire. Fortunately -this self-supporter was very small -in diameter.</p> - -<p>In order to make the top of this particular -stack I had to rely on an extension -ladder, working my way up by degrees; -first lashing the ladder to the stack, extending -it as far as safety would permit, -then lashing the stack again with an extra -large sling about ¾-inch, making a bow-line -knot and with a sling to both sides -of the ladder I used the block and fall, -pulling the bottom part of the ladder up -as far as possible, lashing off again, then -pushing the top part up.</p> - -<p><span class="pagenum"><a id="Page_56"></a>[56]</span></p> - -<div class="figcenter illowp34" id="illus14" style="max-width: 20.3125em;"> - <img class="w100" src="images/illus14.jpg" alt=""> - <p class="caption">Ladder Lashed to Self-Supporting Stack</p> -</div> - -<p><span class="pagenum"><a id="Page_57"></a>[57]</span></p> - -<p>After making the lower half of the -extension ladder solid at the top and bottom -so as not to permit it to sway to -either side, climb the top half of the ladder, -lashing the stack again, and repeat -as before. Guy wires have to be replaced -from time to time, as these wires rust and -fall down, leaving the stack to the mercy -of the winds, if not attended to before -they become so badly decayed.</p> - -<p>As stated before, stacks that are supported -by guy wires have from one to -three sets, and generally four wires to a -set. A ½-inch galvanized wire is sufficient -for any stack, although some people -prefer a larger size wire for double -safety.</p> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_58"></a>[58]</span></p> - -<h2 class="nobreak" id="KNOTS">KNOTS</h2> - -</div> - -<p>Knots are a very important factor in -the Steeple-Jack’s life. Only knots that -have been properly tested should be used. -Many a terrible disaster has been caused -by the use of a knot which was quickly -invented by a man and never tested. -Avoid such accidents by learning to tie -knots in the proper fashion.</p> - -<p>Slip knots are bothersome as well as -dangerous to both the person working in -the air and the people walking underneath. -There are very few knots that are -useful to the Steeple-Jack, and it is well -for every man following this trade to -learn to make these few knots well and -thereby avoid delay when in need.</p> - -<p>For instance, if you were on the top -of a stack and saw a part of your rigging -that did not look any too safe, or you -were near a band and saw your hook was -only sitting on top of the stack and not -inside, as it should be. A sling and the -knowledge of tying knots properly is<span class="pagenum"><a id="Page_59"></a>[59]</span> -required. Practice until you are thoroughly -familiar with this important part -of your trade.</p> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_60"></a>[60]</span></p> - -<h2 class="nobreak" id="SQUARE_KNOT">SQUARE KNOT</h2> - -</div> - -<p>As I said before, slippery knots are -bothersome in many cases. When you -use the slip knot the only way to get -it out is to cut the line; then you are disfiguring -the line or shortening it.</p> - -<p>The square knot and the bow-line knot -are the ones most commonly used.</p> - -<p>In tying a square knot take the ends of -the rope, passing the left end over and -under the right, and then take the right -end and pass it over and under the left.</p> - -<p>In trying to make the square knot there -often forms what is known to line men -as “the granny,” which is useless for any -hazardous purpose. Follow the instructions -of right over and left over and you -can’t go wrong in making the best-liked -knot of all—the SQUARE KNOT.</p> - -<p>In using the square knot while working -in the chair, make two half hitches in -each end of the line. This is used to insure -double safety.</p> - -<p>When using the square knot for the -purpose of adding more line to the riggings, -tie both ends of the lines (as illustrated -on <a href="#Page_61">page 61</a>).</p> - -<p><span class="pagenum"><a id="Page_61"></a>[61]</span></p> - -<div class="figcenter illowp100" id="illus15" style="max-width: 25em;"> - <img class="w100" src="images/illus15.jpg" alt=""> - <p class="caption">Square Knot</p> -</div> - -<div class="figcenter illowp100" id="illus16" style="max-width: 25em;"> - <img class="w100" src="images/illus16.jpg" alt=""> - <p class="caption">Granny Knot</p> -</div> - -<div class="figcenter illowp100" id="illus17" style="max-width: 31.25em;"> - <img class="w100" src="images/illus17.jpg" alt=""> - <p class="caption">Square Knot Sized at Both Ends</p> -</div> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_62"></a>[62]</span></p> - -<h2 class="nobreak" id="BOW-LINE">BOW-LINE</h2> - -</div> - -<p>A more efficient knot than the bow-line -knot was never known. This knot is -used more than any five knots put together -in the Steeple Jack’s work.</p> - -<p>The bow-line knot is mostly favored in -climbing a flagstaff, when making the -stirrup to climb, and in many ways for the -smokestack.</p> - -<p>In making the bow-line knot follow the -illustrations according to numbers. In -No. 1 the rope is formed in a bight; pass -No. 1 through the bight under then over -and then under, as illustrated in No. 2; -then over and down through the bight as -illustrated in Nos. 3 and 4. Draw tight -as illustrated on <a href="#Page_63">page 63</a>.</p> - -<p>As I said before, the bow-line knot is a -very useful knot on the flagpole. By -placing the sling around the pole, passing -the end through the eye, then make your -bow-line knot, leaving the loop for the -size of your foot so as to slip your foot in.</p> - -<p><span class="pagenum"><a id="Page_63"></a>[63]</span></p> - -<div class="figcenter illowp48" id="illus18" style="max-width: 28.125em;"> - <img class="w100" src="images/illus18.jpg" alt=""> - <p class="caption">How to Tie the Bow-line Knot</p> -</div> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_64"></a>[64]</span></p> - -<h2 class="nobreak" id="HALF_HITCHES">HALF HITCHES</h2> - -</div> - -<p>The half hitch is used very frequently -by the Steeple Jack, especially in tying off -the riggings for the night or pulling up -a pole or paint. In making the half -hitches, pass the end around the object -you are tying, then over and around, -standing part between the object and itself; -then under and around the standing -parts and between own loop and the one -first formed. It is no more difficult and -takes no longer to make this knot than it -does for you to count three. Illustrations -on <a href="#Page_65">page 65</a>.</p> - -<p><span class="pagenum"><a id="Page_65"></a>[65]</span></p> - -<div class="figcenter illowp40" id="illus19" style="max-width: 23.4375em;"> - <img class="w100" src="images/illus19.jpg" alt=""> - <p class="caption">Half Hitch</p> -</div> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_66"></a>[66]</span></p> - -<h2 class="nobreak" id="THE_BLACK_WALL">THE BLACK WALL</h2> - -</div> - -<p>The Black Wall, known by many as -the chair hitch, is used by the Steeple -Jack while working in the chair up or -down; stopping to rest or work, reach -through the rope of your chair, grab the -fall line by the right hand, pulling it -through between yourself and the rope of -your chair. At the same movement turning -the rope from left to right making a -loop in this movement, reach up and set -it on the hook of the block at the chair; -while doing this reach with the left hand -and hold your four lines tight together. -This prevents you from going down while -making the Black Wall or chair hitch, as -it is commonly known.</p> - -<div class="figcenter illowp46" id="illus20" style="max-width: 15.625em;"> - <img class="w100" src="images/illus20.jpg" alt=""> - <p class="caption">Black Wall Knot</p> -</div> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_67"></a>[67]</span></p> - -<h2 class="nobreak" id="TANKS_TOWERS_AND_STANDPIPES">TANKS, TOWERS AND STANDPIPES</h2> - -</div> - -<p>Water tanks, water towers or water -standpipes are an easy matter to work -on as far as the rigging is concerned, but -not as much money is to be made as on -smokestacks, church steeples and flagpoles. -Nevertheless, they are worth soliciting.</p> - -<p>Take, for instance, a water tank. A -water tank consists of only the tank itself -sitting on a flat roof or ground. Water -tanks vary in size.</p> - -<p>We will say a tank twelve (12) feet in -diameter, fifteen (15) feet in height, with -very little rust scales. This tank can be -painted in about three hours and requires -no more than three and one-half gallons -of oil paint. I have received as high as -Sixty ($60.00) Dollars for a few hours’ -work on tanks of this kind.</p> - -<p><span class="pagenum"><a id="Page_68"></a>[68]</span></p> - -<div class="figcenter illowp48" id="illus21" style="max-width: 28.125em;"> - <img class="w100" src="images/illus21.jpg" alt=""> - <p class="caption">Painting Water Tank</p> -</div> - -<p><span class="pagenum"><a id="Page_69"></a>[69]</span></p> - -<p>Standpipes are more on the order of -smokestacks. Some have brick foundations -running up a third of the way and -again others have brick half of the way -up and the other half steel, while you find -some that are all steel from the bottom -to the top.</p> - -<p>All standpipes have ladders going to the -top, therefore it is an easy matter to rig -such standpipes with a set of falls and -work in a boatswain chair.</p> - -<p>For an example we will take a standpipe -that is made of steel and that is one -hundred and twenty-five (125) feet in -height, twelve (12) feet in diameter. A -standpipe of this kind would require about -eighteen (18) gallons of oil paint. It -would take one man working in a boatswain -chair about three and one-half -(3½) days. It is always safe to ask -about $250.00 for a job of this nature.</p> - -<p><span class="pagenum"><a id="Page_70"></a>[70]</span></p> - -<div class="figcenter illowp34" id="illus22" style="max-width: 20.3125em;"> - <img class="w100" src="images/illus22.jpg" alt=""> - <p class="caption">Painting Standpipe</p> -</div> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_71"></a>[71]</span></p> - -<h2 class="nobreak" id="WATER_TOWERS">WATER TOWERS</h2> - -</div> - -<p>A chair man considers a water tower -more difficult to work on than the two -mentioned previously.</p> - -<p>The majority of water towers are supported -by four stiff legs. Some have -more and very few less. You will find -very few water towers that stand less -than one hundred and fifty (150) feet -high.</p> - -<p>To paint a water tower it is best to -start on the tank proper, tying a rope -over the ball or pole that extends from -the top of the tank, allowing enough rope -so that it will extend to the edge of the -roof of the tank, then attach the block -and falls to same. Take the other end of -the rope, which is attached to the top of -the tank, running it down on the opposite -side from where you are going to -work, and there fasten it securely to the -beam under the platform to the other -side.</p> - -<p><span class="pagenum"><a id="Page_72"></a>[72]</span></p> - -<div class="figcenter illowp40" id="illus23" style="max-width: 23.4375em;"> - <img class="w100" src="images/illus23.jpg" alt=""> - <p class="caption">WATER TOWER</p> -</div> - -<p><span class="pagenum"><a id="Page_73"></a>[73]</span></p> - -<p>Attach the riggings at the top of each -stiff leg to the platform while working -down the leg supports.</p> - -<p>It takes considerable time and plenty -of patience when working on a water -tower.</p> - -<p>A water tower one hundred and fifty -(150) feet high with four stiff legs and -the tank proper about twelve (12) feet -in diameter by twenty (20) feet in height -will require in the neighborhood of twenty-five -(25) gallons of oil paint. It will -take one man approximately four days -and a half (4½). It should not be difficult -for you to secure about Three Hundred -and Fifty ($350.00) Dollars for a -job of this kind.</p> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_74"></a>[74]</span></p> - -<h2 class="nobreak" id="CHURCH_SPIRES">CHURCH SPIRES</h2> - -</div> - -<p>A tapering construction and not a hard -job to rig after once tried. If you are -capable of rigging a church spire, then it -is an easy matter for you to rig a church -dome or any other structure of that -nature.</p> - -<p>For the majority of church jobs an extension -ladder is the handiest article. -After drawing the extension ladder up to -what is known to the Jack as the pigeon -hole window in the church spire, build -your platform from the window with 3×4 -lumber, extending it out some six feet; -lower a line down on both sides of the -window, having your helper tie the two -ends together around the lower section -of the spire. Then by drawing it to the -window you will have your first loop -around the steeple. Place the extension -ladder on the platform; nail two boards -to the inside of the window, then attach -other ends of boards to the ladder. Use -all the safety devices available when -going out on the ladder. Lash the ladder<span class="pagenum"><a id="Page_76"></a>[76]</span> -wherever it is possible and also yourself -by placing a line under the arms and -tying the line that you have around the -spire, working it up as far as you can go, -then lash this to the ladder so as to keep -the ladder from swaying to the left or -right.</p> - -<p><span class="pagenum"><a id="Page_75"></a>[75]</span></p> - -<div class="figcenter illowp40" id="illus24" style="max-width: 23.4375em;"> - <img class="w100" src="images/illus24.jpg" alt=""> - <p class="caption">Showing Ladder Position from Pigeon-hole -on Spire</p> -</div> - -<p>An extension ladder will bring you -within a distance from which you can -easily lasso the spire. Then by using the -system already mentioned in the self-supporting -stacks without ladders you -will be in a position to accomplish any -work you are on the spire for.</p> - -<p><span class="pagenum"><a id="Page_77"></a>[77]</span></p> - -<div class="figcenter illowp34" id="illus25" style="max-width: 20.3125em;"> - <img class="w100" src="images/illus25.jpg" alt=""> - <p class="caption">Showing Where Riggings Should -Be Lashed at Top of Spire</p> -</div> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_78"></a>[78]</span></p> - -<h2 class="nobreak" id="THE_FLAGSTAFF">THE FLAGSTAFF</h2> - -</div> - -<p>Although the flagstaff is the most simple -part of the Steeple Jack’s work, at the -same time it is the most dangerous. -Before climbing a wooden pole look all -around it first to see if any cracks are -visible. In all probability there are, as -most wooden poles are cracked. If the -crack runs up and down then the pole is -safe, unless it is dry rot, but if the crack -runs crosswise on the pole watch your -step. Chances are it will hold, but again -it might not. Watch your step, because -no one will watch it for you. Remember, -a man can only fall once.</p> - -<p><span class="pagenum"><a id="Page_79"></a>[79]</span></p> - -<div class="figcenter illowp26" id="illus26" style="max-width: 15.625em;"> - <img class="w100" src="images/illus26.jpg" alt=""> -</div> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_80"></a>[80]</span></p> - -<h2 class="nobreak" id="THE_STAFF">THE STAFF</h2> - -</div> - -<p>The flagpole is composed of the following -parts: The pole ball, spindle, -truck, sheave, cleat, brace and halyard.</p> - -<p>The halyard is the rope with which the -flag is drawn up to the top, and it is never -used for climbing purposes. The art of -climbing a flagpole with ease and performing -that which is to be done upon -the pole will be explained in detail -later on.</p> - -<p>The ball on the top of the staff plays -no important part. It is used more for -ornamental purposes than anything else.</p> - -<p>The spindle is the rod that runs from -the ball through the truck into the pole.</p> - -<p>The truck holds the sheave.</p> - -<p>The sheave holds the halyard.</p> - -<p>The cleat is for the purpose of tying -the halyard to a few feet from the base -of the pole. The majority of poles have -iron braces for support connected about -six (6) feet up from the base of the pole.</p> - -<p>From experience I find the steel pole -the most dangerous. In my opinion it is<span class="pagenum"><a id="Page_81"></a>[81]</span> -more dangerous than the wooden pole for -the reason that rust forms inside of the -steel pole and around the bands where it -is connected, and in the winter time it is -easily broken by the cold weather if any -weight is put on it, whereas the wooden -pole can be tested by sounding it as to its -condition.</p> - -<p>If the wooden pole has the dead sound -it is in all probability dry rot, and with a -pole of this kind I would advise you to -be extremely careful. Never sway such -a pole any more than you absolutely must, -and take plenty of time in climbing it. A -pole in this condition gives no warning -before it breaks, but a pole with plenty -of sap gives a cracking sound before it -gives way, which gives the man working -on it a chance to slide to a more secure -position.</p> - -<p><span class="pagenum"><a id="Page_82"></a>[82]</span></p> - -<div class="figcenter illowp21" id="illus27" style="max-width: 12.5em;"> - <img class="w100" src="images/illus27.jpg" alt=""> - <p class="caption">Climbing Flagstaff With Slings</p> -</div> - -<p>A boatswain chair and two slings are -the only tools necessary to work on a -flagpole. Take two slings made of at -least ½-inch line, splice an eye in the -end of each sling—the eye being about -two inches in diameter; place the sling<span class="pagenum"><a id="Page_83"></a>[83]</span> -around the pole, drawing the end opposite -from the eye through the eye; do likewise -with the other sling; tie the boatswain -chair to the top sling, allowing five inches -from the rope of the boatswain chair to -the eye of the sling; tie a loop in the end -of the lower sling—tying a bow-line knot. -This is called a stirrup. Leave the same -distance from eye to knot as from the -chair to the knot. Get into the boatswain -chair.</p> - -<p>The first thing to do is to see that the -loop around the pole is as tight as it will -go. Then place your foot in the stirrup, -take hold of the pole to steady yourself, -raise up in the stirrup, and with the -right hand push the sling holding the -chair up, again making the sling tight to -the pole. Sit down in the chair, reach -down and pull the stirrup sling up until -you can get your foot in. Repeat these -movements and you will see how simple -it is to climb without exerting yourself.</p> - -<p>At every movement going up and coming -down make sure that the sling that -holds the chair is secure and thereby prevent<span class="pagenum"><a id="Page_84"></a>[84]</span> -it from slipping down. Should it -be loose and slip down and your foot in -the stirrup, the result would undoubtedly -be that you would be dangling in the air -head down. Avoid all of this by taking -every precaution.</p> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_85"></a>[85]</span></p> - -<h2 class="nobreak" id="TOP_OF_POLES">TOP OF POLES</h2> - -</div> - -<p>At any time you are working on a flagpole -and the work consists of replacing -a truck, ball or spindle, the only thing to -do is to make sure of the pole being solid -enough for a little swaying. If so, take a -sling, lash yourself to the pole under the -arms as a back brace, then reach up and -pull yourself up and stand in the chair. -Avoid shaking the pole as much as you -possibly can. Then draw up the saw.</p> - -<p>Saw off about one foot of the top, take -a brace and bit, drill the holes, chip off -around the edges and set your new truck -on. The spindle should be set about from -8 to 10 inches down in the pole, then -wedge in with small sticks to make it -solid.</p> - -<p>In painting a flagpole use the halyard -to hold your paint. Twist the rope several -times to keep it at the same distance -as yourself. In painting a pole work -down as you work up.</p> - -<p><span class="pagenum"><a id="Page_86"></a>[86]</span></p> - -<div class="figcenter illowp21" id="illus28" style="max-width: 12.5em;"> - <img class="w100" src="images/illus28.jpg" alt=""> - <p class="caption">Working the Top of a Flagstaff</p> -</div> - -<p><span class="pagenum"><a id="Page_87"></a>[87]</span></p> - -<div class="figcenter illowp100" id="illus29" style="max-width: 25em;"> - <img class="w100" src="images/illus29.jpg" alt=""> - <p class="caption">S Hook Used for Tripping Purpose</p> -</div> - -<div class="figcenter illowp100" id="illus30" style="max-width: 25em;"> - <img class="w100" src="images/illus30.jpg" alt=""> - <p class="caption">Swivel Snap</p> -</div> - -<div class="figcenter illowp100" id="illus31" style="max-width: 31.25em;"> - <img class="w100" src="images/illus31.jpg" alt=""> - <p class="caption">Cleat</p> -</div> - -<div class="figcenter illowp37" id="illus32" style="max-width: 12.5em;"> - <img class="w100" src="images/illus32.jpg" alt=""> - <p class="caption">Top of Flagstaff</p> -</div> - -<div class="figcenter illowp100" id="illus33" style="max-width: 25em;"> - <img class="w100" src="images/illus33.jpg" alt=""> - <p class="caption">Five-inch Brush Is Mostly Used by Steeple-Jacks</p> -</div> - -<p><span class="pagenum"><a id="Page_88"></a>[88]</span></p> - -<div class="figcenter illowp100" id="illus34" style="max-width: 31.25em;"> - <img class="w100" src="images/illus34.jpg" alt=""> - <p class="caption">Come-along Used for Tightening Guy Wire</p> -</div> - -<div class="figcenter illowp100" id="illus35" style="max-width: 25em;"> - <img class="w100" src="images/illus35.jpg" alt=""> - <p class="caption">Double Steel Ball-bearing Block Is -Preferred by the Stack Man</p> -</div> - -<p><span class="pagenum"><a id="Page_89"></a>[89]</span></p> - -<div class="figcenter illowp100" id="illus36" style="max-width: 31.25em;"> - <img class="w100" src="images/illus36.jpg" alt=""> - <p class="caption">Single Steel Block</p> -</div> - -<div class="figcenter illowp46" id="illus37" style="max-width: 15.625em;"> - <img class="w100" src="images/illus37.jpg" alt=""> - <p class="caption">Clip</p> -</div> - -<div class="figcenter illowp100" id="illus38" style="max-width: 31.25em;"> - <img class="w100" src="images/illus38.jpg" alt=""> - <p class="caption">Guy Wire with Clips</p> -</div> - -<p><span class="pagenum"><a id="Page_90"></a>[90]</span></p> - -<div class="figcenter illowp100" id="illus39" style="max-width: 31.25em;"> - <img class="w100" src="images/illus39.jpg" alt=""> - <p class="caption">Turn-buckle</p> -</div> - -<div class="figcenter illowp30" id="illus40" style="max-width: 12.5em;"> - <img class="w100" src="images/illus40.jpg" alt=""> - <p class="caption">Gimblet Block</p> -</div> - -<div class="figcenter illowp22" id="illus41" style="max-width: 9.375em;"> - <img class="w100" src="images/illus41.jpg" alt=""> - <p class="caption">Extension Ladder</p> -</div> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_91"></a>[91]</span></p> - -<h2 class="nobreak" id="PRICES_TO_CHARGE_FOR_WORK">PRICES TO CHARGE FOR WORK</h2> - -</div> - -<p>Prices vary in the different parts of the -country, so it is really difficult for me to -give you exact pointers on that, but we -will take for an example a smokestack -one hundred and fifty feet (150) feet high, -six (6) feet in diameter, in six sections of -the United States. These prices are figured -on the basis as follows (the firm or -individual for whom you are doing the -job is to furnish the paint under these -prices):</p> - -<table> - <tr> - <td>New York, N. Y.</td> - <td class="tdpg">$130.00</td> - </tr> - <tr> - <td>Chicago, Ill.</td> - <td class="tdpg">170.00</td> - </tr> - <tr> - <td>Denver, Colo.</td> - <td class="tdpg">170.00</td> - </tr> - <tr> - <td>San Antonio, Tex.</td> - <td class="tdpg">140.00</td> - </tr> - <tr> - <td>New Orleans, La.</td> - <td class="tdpg">135.00</td> - </tr> - <tr> - <td>San Francisco, Cal.</td> - <td class="tdpg">130.00</td> - </tr> -</table> - -<p>The following prices are used as to -flagstaffs sixty (60) feet high:</p> - -<table> - <tr> - <td>New York, N. Y.</td> - <td class="tdpg">$35.00</td> - </tr> - <tr> - <td>Chicago, Ill.</td> - <td class="tdpg">40.00</td> - </tr> - <tr> - <td>Denver, Colo.</td> - <td class="tdpg">40.00</td> - </tr> - <tr> - <td>San Antonio, Tex.</td> - <td class="tdpg">35.00<span class="pagenum"><a id="Page_92"></a>[92]</span></td> - </tr> - <tr> - <td>New Orleans, La.</td> - <td class="tdpg">35.00</td> - </tr> - <tr> - <td>San Francisco, Cal.</td> - <td class="tdpg">35.00</td> - </tr> -</table> - -<p>With reference to forty (40) foot staffs, -use the following schedule:</p> - -<table> - <tr> - <td>New York, N. Y.</td> - <td class="tdpg">$25.00</td> - </tr> - <tr> - <td>Chicago, Ill.</td> - <td class="tdpg">30.00</td> - </tr> - <tr> - <td>Denver, Colo.</td> - <td class="tdpg">30.00</td> - </tr> - <tr> - <td>San Antonio, Tex.</td> - <td class="tdpg">25.00</td> - </tr> - <tr> - <td>New Orleans, La.</td> - <td class="tdpg">25.00</td> - </tr> - <tr> - <td>San Francisco, Cal.</td> - <td class="tdpg">25.00</td> - </tr> -</table> - -<p>As above stated, these are not standard -prices, but it is safe for you to quote your -prices along these lines.</p> - -<hr class="chap x-ebookmaker-drop"> - -<div class="chapter"> - -<p><span class="pagenum"><a id="Page_93"></a>[93]</span></p> - -<h2 class="nobreak" id="NAMES_OF_KNOTS_BENDS_BIGHTS_AND_HITCHES">NAMES OF KNOTS, BENDS, BIGHTS AND HITCHES</h2> - -</div> - -<ul> -<li>Black Wall Hitch</li> -<li>Bow Knots</li> -<li>Bow-line</li> -<li>Bow-line on bight</li> -<li>Bow shortening</li> -<li>Builders’ hitch</li> -<li>Builders’ knot</li> -<li>Butchers’ knots</li> -<li>Catspaws</li> -<li>Chain hitch</li> -<li>Chain knots</li> -<li>Clinches</li> -<li>Close band</li> -<li>Clove hitch</li> -<li>Crown knots</li> -<li>Cuckolds’ necks</li> -<li>Deadeyes</li> -<li>Dogshanks</li> -<li>Double chain</li> -<li>Double crown</li> -<li>Double figure-eight</li> -<li>Double knots</li> -<li>Double wall</li> -<li>Double wall and crown</li> -<li>Eye splice</li> -<li>Figure-eight knot</li> -<li>Fisherman’s hitch</li> -<li>Fisherman’s knot</li> -<li>Fivefold knot</li> -<li>Flemish eye</li> -<li>Fourfold knot</li> -<li>French shroud knot</li> -<li>Gaff-topsail halyard bend</li> -<li>Garrick bend</li> -<li>Gordian knot</li> -<li>Granny knot</li> -<li>Gunner’s knot</li> -<li>Half-hitch</li> -<li>Half-hitch and seizing</li> -<li>Half-hitch</li> -<li>Hawser hitch</li> -<li>Hawsers</li> -<li>Hitches<p><span class="pagenum"><a id="Page_94"></a>[94]</span></p></li> -<li>Larks’ heads</li> -<li>Magnus hitch</li> -<li>Manrope knot</li> -<li>Matthew Walker knot</li> -<li>Midshipmen’s hitch</li> -<li>Mooring knots</li> -<li>Open-hand knot</li> -<li>Ordinary knot</li> -<li>Overhand knot</li> -<li>Pier bend</li> -<li>Reef knot</li> -<li>Reefing knots</li> -<li>Roband hitch</li> -<li>Rolling hitch</li> -<li>Running bow-line</li> -<li>Running knot</li> -<li>Sailors’ knots</li> -<li>Sheepshanks</li> -<li>Short splice</li> -<li>Shroud knots</li> -<li>Simple hitch</li> -<li>Simple knots</li> -<li>Sixfold knot</li> -<li>Slip knots</li> -<li>Slippery hitch</li> -<li>Square knots</li> -<li>Stopper knot</li> -<li>Threefold knot</li> -<li>Throat seizing</li> -<li>Timber hitch</li> -<li>Tomfool knot</li> -<li>Treble knot</li> -<li>Turks’ caps</li> -<li>Turks’ heads</li> -<li>Twist knot</li> -<li>Wall knots</li> -<li>Waterman’s knot</li> -<li>Weavers’ knot</li> -<li>Wedding knot</li> -<li>Whipping</li> -<li>Wind knots</li> -</ul> - -<p><span class="pagenum"><a id="Page_95"></a>[95]</span></p> - -<div class="box"> - -<p class="center">THE END</p> - -</div> - -<div style='display:block; margin-top:4em'>*** END OF THE PROJECT GUTENBERG EBOOK THE STEEPLE-JACK'S INSTRUCTOR ***</div> -<div style='text-align:left'> - -<div style='display:block; margin:1em 0'> -Updated editions will replace the previous one—the old editions will -be renamed. -</div> - -<div style='display:block; margin:1em 0'> -Creating the works from print editions not protected by U.S. copyright -law means that no one owns a United States copyright in these works, -so the Foundation (and you!) can copy and distribute it in the United -States without permission and without paying copyright -royalties. Special rules, set forth in the General Terms of Use part -of this license, apply to copying and distributing Project -Gutenberg™ electronic works to protect the PROJECT GUTENBERG™ -concept and trademark. Project Gutenberg is a registered trademark, -and may not be used if you charge for an eBook, except by following -the terms of the trademark license, including paying royalties for use -of the Project Gutenberg trademark. If you do not charge anything for -copies of this eBook, complying with the trademark license is very -easy. You may use this eBook for nearly any purpose such as creation -of derivative works, reports, performances and research. Project -Gutenberg eBooks may be modified and printed and given away—you may -do practically ANYTHING in the United States with eBooks not protected -by U.S. copyright law. Redistribution is subject to the trademark -license, especially commercial redistribution. -</div> - -<div style='margin-top:1em; font-size:1.1em; text-align:center'>START: FULL LICENSE</div> -<div style='text-align:center;font-size:0.9em'>THE FULL PROJECT GUTENBERG LICENSE</div> -<div style='text-align:center;font-size:0.9em'>PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK</div> - -<div style='display:block; margin:1em 0'> -To protect the Project Gutenberg™ mission of promoting the free -distribution of electronic works, by using or distributing this work -(or any other work associated in any way with the phrase “Project -Gutenberg”), you agree to comply with all the terms of the Full -Project Gutenberg™ License available with this file or online at -www.gutenberg.org/license. -</div> - -<div style='display:block; font-size:1.1em; margin:1em 0; font-weight:bold'> -Section 1. General Terms of Use and Redistributing Project Gutenberg™ electronic works -</div> - -<div style='display:block; margin:1em 0'> -1.A. By reading or using any part of this Project Gutenberg™ -electronic work, you indicate that you have read, understand, agree to -and accept all the terms of this license and intellectual property -(trademark/copyright) agreement. If you do not agree to abide by all -the terms of this agreement, you must cease using and return or -destroy all copies of Project Gutenberg™ electronic works in your -possession. If you paid a fee for obtaining a copy of or access to a -Project Gutenberg™ electronic work and you do not agree to be bound -by the terms of this agreement, you may obtain a refund from the person -or entity to whom you paid the fee as set forth in paragraph 1.E.8. -</div> - -<div style='display:block; margin:1em 0'> -1.B. “Project Gutenberg” is a registered trademark. It may only be -used on or associated in any way with an electronic work by people who -agree to be bound by the terms of this agreement. There are a few -things that you can do with most Project Gutenberg™ electronic works -even without complying with the full terms of this agreement. See -paragraph 1.C below. There are a lot of things you can do with Project -Gutenberg™ electronic works if you follow the terms of this -agreement and help preserve free future access to Project Gutenberg™ -electronic works. See paragraph 1.E below. -</div> - -<div style='display:block; margin:1em 0'> -1.C. The Project Gutenberg Literary Archive Foundation (“the -Foundation” or PGLAF), owns a compilation copyright in the collection -of Project Gutenberg™ electronic works. Nearly all the individual -works in the collection are in the public domain in the United -States. If an individual work is unprotected by copyright law in the -United States and you are located in the United States, we do not -claim a right to prevent you from copying, distributing, performing, -displaying or creating derivative works based on the work as long as -all references to Project Gutenberg are removed. Of course, we hope -that you will support the Project Gutenberg™ mission of promoting -free access to electronic works by freely sharing Project Gutenberg™ -works in compliance with the terms of this agreement for keeping the -Project Gutenberg™ name associated with the work. You can easily -comply with the terms of this agreement by keeping this work in the -same format with its attached full Project Gutenberg™ License when -you share it without charge with others. -</div> - -<div style='display:block; margin:1em 0'> -1.D. The copyright laws of the place where you are located also govern -what you can do with this work. Copyright laws in most countries are -in a constant state of change. If you are outside the United States, -check the laws of your country in addition to the terms of this -agreement before downloading, copying, displaying, performing, -distributing or creating derivative works based on this work or any -other Project Gutenberg™ work. The Foundation makes no -representations concerning the copyright status of any work in any -country other than the United States. -</div> - -<div style='display:block; margin:1em 0'> -1.E. Unless you have removed all references to Project Gutenberg: -</div> - -<div style='display:block; margin:1em 0'> -1.E.1. The following sentence, with active links to, or other -immediate access to, the full Project Gutenberg™ License must appear -prominently whenever any copy of a Project Gutenberg™ work (any work -on which the phrase “Project Gutenberg” appears, or with which the -phrase “Project Gutenberg” is associated) is accessed, displayed, -performed, viewed, copied or distributed: -</div> - -<blockquote> - <div style='display:block; margin:1em 0'> - This eBook is for the use of anyone anywhere in the United States and most - other parts of the world at no cost and with almost no restrictions - whatsoever. You may copy it, give it away or re-use it under the terms - of the Project Gutenberg License included with this eBook or online - at <a href="https://www.gutenberg.org">www.gutenberg.org</a>. If you - are not located in the United States, you will have to check the laws - of the country where you are located before using this eBook. - </div> -</blockquote> - -<div style='display:block; margin:1em 0'> -1.E.2. If an individual Project Gutenberg™ electronic work is -derived from texts not protected by U.S. copyright law (does not -contain a notice indicating that it is posted with permission of the -copyright holder), the work can be copied and distributed to anyone in -the United States without paying any fees or charges. If you are -redistributing or providing access to a work with the phrase “Project -Gutenberg” associated with or appearing on the work, you must comply -either with the requirements of paragraphs 1.E.1 through 1.E.7 or -obtain permission for the use of the work and the Project Gutenberg™ -trademark as set forth in paragraphs 1.E.8 or 1.E.9. -</div> - -<div style='display:block; margin:1em 0'> -1.E.3. If an individual Project Gutenberg™ electronic work is posted -with the permission of the copyright holder, your use and distribution -must comply with both paragraphs 1.E.1 through 1.E.7 and any -additional terms imposed by the copyright holder. Additional terms -will be linked to the Project Gutenberg™ License for all works -posted with the permission of the copyright holder found at the -beginning of this work. -</div> - -<div style='display:block; margin:1em 0'> -1.E.4. Do not unlink or detach or remove the full Project Gutenberg™ -License terms from this work, or any files containing a part of this -work or any other work associated with Project Gutenberg™. -</div> - -<div style='display:block; margin:1em 0'> -1.E.5. Do not copy, display, perform, distribute or redistribute this -electronic work, or any part of this electronic work, without -prominently displaying the sentence set forth in paragraph 1.E.1 with -active links or immediate access to the full terms of the Project -Gutenberg™ License. -</div> - -<div style='display:block; margin:1em 0'> -1.E.6. You may convert to and distribute this work in any binary, -compressed, marked up, nonproprietary or proprietary form, including -any word processing or hypertext form. However, if you provide access -to or distribute copies of a Project Gutenberg™ work in a format -other than “Plain Vanilla ASCII” or other format used in the official -version posted on the official Project Gutenberg™ website -(www.gutenberg.org), you must, at no additional cost, fee or expense -to the user, provide a copy, a means of exporting a copy, or a means -of obtaining a copy upon request, of the work in its original “Plain -Vanilla ASCII” or other form. Any alternate format must include the -full Project Gutenberg™ License as specified in paragraph 1.E.1. -</div> - -<div style='display:block; margin:1em 0'> -1.E.7. Do not charge a fee for access to, viewing, displaying, -performing, copying or distributing any Project Gutenberg™ works -unless you comply with paragraph 1.E.8 or 1.E.9. -</div> - -<div style='display:block; margin:1em 0'> -1.E.8. You may charge a reasonable fee for copies of or providing -access to or distributing Project Gutenberg™ electronic works -provided that: -</div> - -<div style='margin-left:0.7em;'> - <div style='text-indent:-0.7em'> - • You pay a royalty fee of 20% of the gross profits you derive from - the use of Project Gutenberg™ works calculated using the method - you already use to calculate your applicable taxes. The fee is owed - to the owner of the Project Gutenberg™ trademark, but he has - agreed to donate royalties under this paragraph to the Project - Gutenberg Literary Archive Foundation. Royalty payments must be paid - within 60 days following each date on which you prepare (or are - legally required to prepare) your periodic tax returns. Royalty - payments should be clearly marked as such and sent to the Project - Gutenberg Literary Archive Foundation at the address specified in - Section 4, “Information about donations to the Project Gutenberg - Literary Archive Foundation.” - </div> - - <div style='text-indent:-0.7em'> - • You provide a full refund of any money paid by a user who notifies - you in writing (or by e-mail) within 30 days of receipt that s/he - does not agree to the terms of the full Project Gutenberg™ - License. You must require such a user to return or destroy all - copies of the works possessed in a physical medium and discontinue - all use of and all access to other copies of Project Gutenberg™ - works. - </div> - - <div style='text-indent:-0.7em'> - • You provide, in accordance with paragraph 1.F.3, a full refund of - any money paid for a work or a replacement copy, if a defect in the - electronic work is discovered and reported to you within 90 days of - receipt of the work. - </div> - - <div style='text-indent:-0.7em'> - • You comply with all other terms of this agreement for free - distribution of Project Gutenberg™ works. - </div> -</div> - -<div style='display:block; margin:1em 0'> -1.E.9. If you wish to charge a fee or distribute a Project -Gutenberg™ electronic work or group of works on different terms than -are set forth in this agreement, you must obtain permission in writing -from the Project Gutenberg Literary Archive Foundation, the manager of -the Project Gutenberg™ trademark. Contact the Foundation as set -forth in Section 3 below. -</div> - -<div style='display:block; margin:1em 0'> -1.F. -</div> - -<div style='display:block; margin:1em 0'> -1.F.1. Project Gutenberg volunteers and employees expend considerable -effort to identify, do copyright research on, transcribe and proofread -works not protected by U.S. copyright law in creating the Project -Gutenberg™ collection. Despite these efforts, Project Gutenberg™ -electronic works, and the medium on which they may be stored, may -contain “Defects,” such as, but not limited to, incomplete, inaccurate -or corrupt data, transcription errors, a copyright or other -intellectual property infringement, a defective or damaged disk or -other medium, a computer virus, or computer codes that damage or -cannot be read by your equipment. -</div> - -<div style='display:block; margin:1em 0'> -1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the “Right -of Replacement or Refund” described in paragraph 1.F.3, the Project -Gutenberg Literary Archive Foundation, the owner of the Project -Gutenberg™ trademark, and any other party distributing a Project -Gutenberg™ electronic work under this agreement, disclaim all -liability to you for damages, costs and expenses, including legal -fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT -LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE -PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE -TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE -LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR -INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH -DAMAGE. -</div> - -<div style='display:block; margin:1em 0'> -1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a -defect in this electronic work within 90 days of receiving it, you can -receive a refund of the money (if any) you paid for it by sending a -written explanation to the person you received the work from. If you -received the work on a physical medium, you must return the medium -with your written explanation. The person or entity that provided you -with the defective work may elect to provide a replacement copy in -lieu of a refund. If you received the work electronically, the person -or entity providing it to you may choose to give you a second -opportunity to receive the work electronically in lieu of a refund. If -the second copy is also defective, you may demand a refund in writing -without further opportunities to fix the problem. -</div> - -<div style='display:block; margin:1em 0'> -1.F.4. Except for the limited right of replacement or refund set forth -in paragraph 1.F.3, this work is provided to you ‘AS-IS’, WITH NO -OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT -LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE. -</div> - -<div style='display:block; margin:1em 0'> -1.F.5. Some states do not allow disclaimers of certain implied -warranties or the exclusion or limitation of certain types of -damages. If any disclaimer or limitation set forth in this agreement -violates the law of the state applicable to this agreement, the -agreement shall be interpreted to make the maximum disclaimer or -limitation permitted by the applicable state law. The invalidity or -unenforceability of any provision of this agreement shall not void the -remaining provisions. -</div> - -<div style='display:block; margin:1em 0'> -1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the -trademark owner, any agent or employee of the Foundation, anyone -providing copies of Project Gutenberg™ electronic works in -accordance with this agreement, and any volunteers associated with the -production, promotion and distribution of Project Gutenberg™ -electronic works, harmless from all liability, costs and expenses, -including legal fees, that arise directly or indirectly from any of -the following which you do or cause to occur: (a) distribution of this -or any Project Gutenberg™ work, (b) alteration, modification, or -additions or deletions to any Project Gutenberg™ work, and (c) any -Defect you cause. -</div> - -<div style='display:block; font-size:1.1em; margin:1em 0; font-weight:bold'> -Section 2. Information about the Mission of Project Gutenberg™ -</div> - -<div style='display:block; margin:1em 0'> -Project Gutenberg™ is synonymous with the free distribution of -electronic works in formats readable by the widest variety of -computers including obsolete, old, middle-aged and new computers. It -exists because of the efforts of hundreds of volunteers and donations -from people in all walks of life. -</div> - -<div style='display:block; margin:1em 0'> -Volunteers and financial support to provide volunteers with the -assistance they need are critical to reaching Project Gutenberg™’s -goals and ensuring that the Project Gutenberg™ collection will -remain freely available for generations to come. In 2001, the Project -Gutenberg Literary Archive Foundation was created to provide a secure -and permanent future for Project Gutenberg™ and future -generations. To learn more about the Project Gutenberg Literary -Archive Foundation and how your efforts and donations can help, see -Sections 3 and 4 and the Foundation information page at www.gutenberg.org. -</div> - -<div style='display:block; font-size:1.1em; margin:1em 0; font-weight:bold'> -Section 3. Information about the Project Gutenberg Literary Archive Foundation -</div> - -<div style='display:block; margin:1em 0'> -The Project Gutenberg Literary Archive Foundation is a non-profit -501(c)(3) educational corporation organized under the laws of the -state of Mississippi and granted tax exempt status by the Internal -Revenue Service. The Foundation’s EIN or federal tax identification -number is 64-6221541. Contributions to the Project Gutenberg Literary -Archive Foundation are tax deductible to the full extent permitted by -U.S. federal laws and your state’s laws. -</div> - -<div style='display:block; margin:1em 0'> -The Foundation’s business office is located at 809 North 1500 West, -Salt Lake City, UT 84116, (801) 596-1887. Email contact links and up -to date contact information can be found at the Foundation’s website -and official page at www.gutenberg.org/contact -</div> - -<div style='display:block; font-size:1.1em; margin:1em 0; font-weight:bold'> -Section 4. Information about Donations to the Project Gutenberg Literary Archive Foundation -</div> - -<div style='display:block; margin:1em 0'> -Project Gutenberg™ depends upon and cannot survive without widespread -public support and donations to carry out its mission of -increasing the number of public domain and licensed works that can be -freely distributed in machine-readable form accessible by the widest -array of equipment including outdated equipment. Many small donations -($1 to $5,000) are particularly important to maintaining tax exempt -status with the IRS. -</div> - -<div style='display:block; margin:1em 0'> -The Foundation is committed to complying with the laws regulating -charities and charitable donations in all 50 states of the United -States. Compliance requirements are not uniform and it takes a -considerable effort, much paperwork and many fees to meet and keep up -with these requirements. We do not solicit donations in locations -where we have not received written confirmation of compliance. To SEND -DONATIONS or determine the status of compliance for any particular state -visit <a href="https://www.gutenberg.org/donate/">www.gutenberg.org/donate</a>. -</div> - -<div style='display:block; margin:1em 0'> -While we cannot and do not solicit contributions from states where we -have not met the solicitation requirements, we know of no prohibition -against accepting unsolicited donations from donors in such states who -approach us with offers to donate. -</div> - -<div style='display:block; margin:1em 0'> -International donations are gratefully accepted, but we cannot make -any statements concerning tax treatment of donations received from -outside the United States. U.S. laws alone swamp our small staff. -</div> - -<div style='display:block; margin:1em 0'> -Please check the Project Gutenberg web pages for current donation -methods and addresses. Donations are accepted in a number of other -ways including checks, online payments and credit card donations. To -donate, please visit: www.gutenberg.org/donate -</div> - -<div style='display:block; font-size:1.1em; margin:1em 0; font-weight:bold'> -Section 5. General Information About Project Gutenberg™ electronic works -</div> - -<div style='display:block; margin:1em 0'> -Professor Michael S. Hart was the originator of the Project -Gutenberg™ concept of a library of electronic works that could be -freely shared with anyone. For forty years, he produced and -distributed Project Gutenberg™ eBooks with only a loose network of -volunteer support. -</div> - -<div style='display:block; margin:1em 0'> -Project Gutenberg™ eBooks are often created from several printed -editions, all of which are confirmed as not protected by copyright in -the U.S. unless a copyright notice is included. Thus, we do not -necessarily keep eBooks in compliance with any particular paper -edition. -</div> - -<div style='display:block; margin:1em 0'> -Most people start at our website which has the main PG search -facility: <a href="https://www.gutenberg.org">www.gutenberg.org</a>. -</div> - -<div style='display:block; margin:1em 0'> -This website includes information about Project Gutenberg™, -including how to make donations to the Project Gutenberg Literary -Archive Foundation, how to help produce our new eBooks, and how to -subscribe to our email newsletter to hear about new eBooks. -</div> - -</div> -</body> -</html> diff --git a/old/69360-h/images/cover.jpg b/old/69360-h/images/cover.jpg Binary files differdeleted file mode 100644 index c54fc55..0000000 --- a/old/69360-h/images/cover.jpg +++ /dev/null diff --git a/old/69360-h/images/illus01.jpg b/old/69360-h/images/illus01.jpg Binary files differdeleted file mode 100644 index a9d963f..0000000 --- a/old/69360-h/images/illus01.jpg +++ /dev/null diff --git a/old/69360-h/images/illus02.jpg b/old/69360-h/images/illus02.jpg Binary files differdeleted file mode 100644 index 884d447..0000000 --- a/old/69360-h/images/illus02.jpg +++ /dev/null diff --git a/old/69360-h/images/illus03.jpg b/old/69360-h/images/illus03.jpg Binary files differdeleted file mode 100644 index 919fdab..0000000 --- a/old/69360-h/images/illus03.jpg +++ /dev/null diff --git a/old/69360-h/images/illus04.jpg b/old/69360-h/images/illus04.jpg Binary files differdeleted file mode 100644 index 2adc5de..0000000 --- a/old/69360-h/images/illus04.jpg +++ /dev/null diff --git a/old/69360-h/images/illus05.jpg b/old/69360-h/images/illus05.jpg Binary files differdeleted file mode 100644 index 002d348..0000000 --- a/old/69360-h/images/illus05.jpg +++ /dev/null diff --git a/old/69360-h/images/illus06.jpg b/old/69360-h/images/illus06.jpg Binary files differdeleted file mode 100644 index ed3ce13..0000000 --- a/old/69360-h/images/illus06.jpg +++ /dev/null diff --git a/old/69360-h/images/illus07.jpg b/old/69360-h/images/illus07.jpg Binary files differdeleted file mode 100644 index 1d9c330..0000000 --- a/old/69360-h/images/illus07.jpg +++ /dev/null diff --git a/old/69360-h/images/illus08.jpg b/old/69360-h/images/illus08.jpg Binary files differdeleted file mode 100644 index 2387d85..0000000 --- a/old/69360-h/images/illus08.jpg +++ /dev/null diff --git a/old/69360-h/images/illus09.jpg b/old/69360-h/images/illus09.jpg Binary files differdeleted file mode 100644 index 854291f..0000000 --- a/old/69360-h/images/illus09.jpg +++ /dev/null diff --git a/old/69360-h/images/illus10.jpg b/old/69360-h/images/illus10.jpg Binary files differdeleted file mode 100644 index 7b45b6e..0000000 --- a/old/69360-h/images/illus10.jpg +++ /dev/null diff --git a/old/69360-h/images/illus11.jpg b/old/69360-h/images/illus11.jpg Binary files differdeleted file mode 100644 index c7ed6d4..0000000 --- a/old/69360-h/images/illus11.jpg +++ /dev/null diff --git a/old/69360-h/images/illus12.jpg b/old/69360-h/images/illus12.jpg Binary files differdeleted file mode 100644 index d48c66b..0000000 --- a/old/69360-h/images/illus12.jpg +++ /dev/null diff --git a/old/69360-h/images/illus13.jpg b/old/69360-h/images/illus13.jpg Binary files differdeleted file mode 100644 index e04a2cb..0000000 --- a/old/69360-h/images/illus13.jpg +++ /dev/null diff --git a/old/69360-h/images/illus14.jpg b/old/69360-h/images/illus14.jpg Binary files differdeleted file mode 100644 index 380c3d2..0000000 --- a/old/69360-h/images/illus14.jpg +++ /dev/null diff --git a/old/69360-h/images/illus15.jpg b/old/69360-h/images/illus15.jpg Binary files differdeleted file mode 100644 index bc2a8f4..0000000 --- a/old/69360-h/images/illus15.jpg +++ /dev/null diff --git a/old/69360-h/images/illus16.jpg b/old/69360-h/images/illus16.jpg Binary files differdeleted file mode 100644 index afcac8a..0000000 --- a/old/69360-h/images/illus16.jpg +++ /dev/null diff --git a/old/69360-h/images/illus17.jpg b/old/69360-h/images/illus17.jpg Binary files differdeleted file mode 100644 index c483efe..0000000 --- a/old/69360-h/images/illus17.jpg +++ /dev/null diff --git a/old/69360-h/images/illus18.jpg b/old/69360-h/images/illus18.jpg Binary files differdeleted file mode 100644 index 8cf864c..0000000 --- a/old/69360-h/images/illus18.jpg +++ /dev/null diff --git a/old/69360-h/images/illus19.jpg b/old/69360-h/images/illus19.jpg Binary files differdeleted file mode 100644 index 204570f..0000000 --- a/old/69360-h/images/illus19.jpg +++ /dev/null diff --git a/old/69360-h/images/illus20.jpg b/old/69360-h/images/illus20.jpg Binary files differdeleted file mode 100644 index f89d098..0000000 --- a/old/69360-h/images/illus20.jpg +++ /dev/null diff --git a/old/69360-h/images/illus21.jpg b/old/69360-h/images/illus21.jpg Binary files differdeleted file mode 100644 index a48ac9c..0000000 --- a/old/69360-h/images/illus21.jpg +++ /dev/null diff --git a/old/69360-h/images/illus22.jpg b/old/69360-h/images/illus22.jpg Binary files differdeleted file mode 100644 index 09a5eba..0000000 --- a/old/69360-h/images/illus22.jpg +++ /dev/null diff --git a/old/69360-h/images/illus23.jpg b/old/69360-h/images/illus23.jpg Binary files differdeleted file mode 100644 index 723f4ec..0000000 --- a/old/69360-h/images/illus23.jpg +++ /dev/null diff --git a/old/69360-h/images/illus24.jpg b/old/69360-h/images/illus24.jpg Binary files differdeleted file mode 100644 index d829cd1..0000000 --- a/old/69360-h/images/illus24.jpg +++ /dev/null diff --git a/old/69360-h/images/illus25.jpg b/old/69360-h/images/illus25.jpg Binary files differdeleted file mode 100644 index c336d98..0000000 --- a/old/69360-h/images/illus25.jpg +++ /dev/null diff --git a/old/69360-h/images/illus26.jpg b/old/69360-h/images/illus26.jpg Binary files differdeleted file mode 100644 index f374eae..0000000 --- a/old/69360-h/images/illus26.jpg +++ /dev/null diff --git a/old/69360-h/images/illus27.jpg b/old/69360-h/images/illus27.jpg Binary files differdeleted file mode 100644 index d347b6c..0000000 --- a/old/69360-h/images/illus27.jpg +++ /dev/null diff --git a/old/69360-h/images/illus28.jpg b/old/69360-h/images/illus28.jpg Binary files differdeleted file mode 100644 index ecebff7..0000000 --- a/old/69360-h/images/illus28.jpg +++ /dev/null diff --git a/old/69360-h/images/illus29.jpg b/old/69360-h/images/illus29.jpg Binary files differdeleted file mode 100644 index 2c87078..0000000 --- a/old/69360-h/images/illus29.jpg +++ /dev/null diff --git a/old/69360-h/images/illus30.jpg b/old/69360-h/images/illus30.jpg Binary files differdeleted file mode 100644 index d1f7355..0000000 --- a/old/69360-h/images/illus30.jpg +++ /dev/null diff --git a/old/69360-h/images/illus31.jpg b/old/69360-h/images/illus31.jpg Binary files differdeleted file mode 100644 index 1013cfb..0000000 --- a/old/69360-h/images/illus31.jpg +++ /dev/null diff --git a/old/69360-h/images/illus32.jpg b/old/69360-h/images/illus32.jpg Binary files differdeleted file mode 100644 index 1ac4f6c..0000000 --- a/old/69360-h/images/illus32.jpg +++ /dev/null diff --git a/old/69360-h/images/illus33.jpg b/old/69360-h/images/illus33.jpg Binary files differdeleted file mode 100644 index bcb3a6c..0000000 --- a/old/69360-h/images/illus33.jpg +++ /dev/null diff --git a/old/69360-h/images/illus34.jpg b/old/69360-h/images/illus34.jpg Binary files differdeleted file mode 100644 index 3e9b462..0000000 --- a/old/69360-h/images/illus34.jpg +++ /dev/null diff --git a/old/69360-h/images/illus35.jpg b/old/69360-h/images/illus35.jpg Binary files differdeleted file mode 100644 index d7a44fa..0000000 --- a/old/69360-h/images/illus35.jpg +++ /dev/null diff --git a/old/69360-h/images/illus36.jpg b/old/69360-h/images/illus36.jpg Binary files differdeleted file mode 100644 index ed42430..0000000 --- a/old/69360-h/images/illus36.jpg +++ /dev/null diff --git a/old/69360-h/images/illus37.jpg b/old/69360-h/images/illus37.jpg Binary files differdeleted file mode 100644 index fbc1765..0000000 --- a/old/69360-h/images/illus37.jpg +++ /dev/null diff --git a/old/69360-h/images/illus38.jpg b/old/69360-h/images/illus38.jpg Binary files differdeleted file mode 100644 index 58f6b72..0000000 --- a/old/69360-h/images/illus38.jpg +++ /dev/null diff --git a/old/69360-h/images/illus39.jpg b/old/69360-h/images/illus39.jpg Binary files differdeleted file mode 100644 index 1038118..0000000 --- a/old/69360-h/images/illus39.jpg +++ /dev/null diff --git a/old/69360-h/images/illus40.jpg b/old/69360-h/images/illus40.jpg Binary files differdeleted file mode 100644 index dc37448..0000000 --- a/old/69360-h/images/illus40.jpg +++ /dev/null diff --git a/old/69360-h/images/illus41.jpg b/old/69360-h/images/illus41.jpg Binary files differdeleted file mode 100644 index 08547ec..0000000 --- a/old/69360-h/images/illus41.jpg +++ /dev/null diff --git a/old/69360-h/images/tp-deco.jpg b/old/69360-h/images/tp-deco.jpg Binary files differdeleted file mode 100644 index 5d763db..0000000 --- a/old/69360-h/images/tp-deco.jpg +++ /dev/null |
